Need to see slammed C10\'s for inspiration

[db_duvida]

My buddy just picked up a 66 C10 but he wants to see other trucks that have already been slammed. Please post your picture and tell me what you did to lower your vehicle, i.e. 2 1/2 inch spindles in front 4 inch springs in the back, etc.

[fchava]

here is mine. 2.5" spindles + 2" springs infront, 4" drop in back.

[muddpile]

It has drop spindles and a healthy kick on each end of the frame, coilovers on the rear.

[badriand]

serveral here including mine and others on this board
http://www.jalopyjournal.com/forum/s...tb+white+walls

[NF65Fleetside]

This is where I want my truck to be!....Id even do my same color and all but Im stuck on making a mild 60's custom.

[Rogue 64]

I drool over that truck.
I spent much of the day at Straykat 500, looking at it.
Not the style I would build, but built the right way.
Nice and low static drop, and no airsacks.

He lets the workmanship say it all.
Simple, tasteful and straight as an arrow.
No sparks, no garish paint, and certainly no Flat Black and red wheels with WWW.

I also like fchava's.
Samething, Nice and clean w/ a perfect stance.
Although Torque Thrust have been planned for mine for 15 years i am really liking those rallys w/67 centers.

[billydonn]

Don't know if I'd call mine "slammed", but it is lowered. No bags or sparks.

[scotts62]

Not any of mine, came across them on internet, but they may help you out on what you are looking for. (Blue one's sweet!)

Scott

[daveodom]

Here's my 64' 3 inch drop springs up front 5 inch drop springs in the rear. 245/45-15 front tires 255/55-15 rear tires. Just got my 350 small block in and running it hard.

[protrash64]

Here's 5.5" up front w/ coils and spindles.......rear is flip kit on leafs so I dont know how low it is............have fun!!!!!!!!!!!!

[ChiefRocka]

-

-
-
-

-
-
The PO heated the front springs, and I added some springs I had laying around to the rear, so unless someone can give a stock measurment (from the fender to the center of the spindle/axle) I couldn't tell you the drop amount.

The last pic was 'shopped' be someone here...mabey someday....

[63 & 64 Bowties]

Not exactly slammed, just lowered, but;
2 coils cut off the front springs, and 70ish Chevelle spring in the rear

[SIR]

...not "slammed" but I like the way she looks....

[Rogue 64]

Torque Thrust! :drool:

There used to be a red SWB in town on TTD's

I guess I have a decision to make, but today Tririb Radirs are calling me.

[Lane]

A little ways to go, but I couldn't resist..

[Clyde65]

Drop spindles and 1.5" drop spring with rear bags.
I like this look on our trucks. This is Clyde.