What did you get done? 05/11 Mothers Day edition - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**N2TRUX** · 05-13-2008, 04:18 AM

I spent most of yesterday car shopping with my daughter. It absolutly amazes me that my "baby" girl has suddenly become old enough to get her first car. She has had her heart set on a Hummer H3 for over a year now. Unfortunately the gas prices have crushed her dreams and eliminated that as an option. Instead we have been looking at fuel efficient crosssover SUV's. It's really hard to get excited about anything that gets good mileage...

Today I went to my Mom-n-laws house and had tons of great food.....What did you get done?

vern350 · 05-13-2008, 04:27 AM

bought a new rear bumper for the 81 to replace the roll pan. Can't wait to get it on. NOS GM bumper.

CavScoutsC10 · 05-13-2008, 04:33 AM

went to the beach on saturday.. spent sunday with the wife and kids

87Lowrider · 05-13-2008, 05:09 AM

Yesterday, I put the radiator in the lowrider, still need to fab up some mounting brackets for it since the truck had a smaller one in there for the 350 that I took out. I guess I'll install electric fans since the shroud won't fit either.

Today, we went to my oldests daughters graduation ceremony and then out to eat with the wife. Man I wish it'd stop raining for a while her in KY. I feel like I'm back in Seattle.

Kenny

HanSoloWS6 · 05-13-2008, 05:25 AM

I tried getting the beast to fire, but a leak in my fuel line is letting air in. So, when I get some spare time, I'll be tracing the leak and getting air out of the lines. I really want to drive my truck again, but I'm beginning to seriously consider just starting the dismantling process so I can start restoring it and getting it on the ground.

Spent the rest of the weekend with the wife and family.

454HO · 05-13-2008, 06:18 AM

Quote:

Originally Posted by 87Lowrider

Yesterday, I put the radiator in the lowrider, still need to fab up some mounting brackets for it since the truck had a smaller one in there for the 350 that I took out. I guess I'll install electric fans since the shroud won't fit either.

Kenny

Kenny, I was hoping to hear that you cranked it up and drove it this weekend.

I was real close to driving mine yesterday. Got the brakes bled and the trans controller hooked up. I fired it up and put it in gear for the first time, but it was still on jack stands. The rear wheels actually turned. But then my make-shift power steering hose blew apart.

SBellew · 05-13-2008, 06:39 AM

Its my birthday today so I decided to take the day off (ground was too wet to cut grass, lay under the '85 and hook up the exhaust and try to get the 2nd motor mount bolt started (first went in like a champ first try. Dropped the 350 and trans in yesterday. Gotta get out and hook everything up and see if it fires up and hope that no other problems are found with it so it can be my DD while I work on the '77 since I sold my F150 last week.

manimal · 05-13-2008, 07:22 AM

Quote:

Originally Posted by SBellew

Its my birthday today so I decided to take the day off (ground was too wet to cut grass, lay under the '85 and hook up the exhaust and try to get the 2nd motor mount bolt started (first went in like a champ first try. Dropped the 350 and trans in yesterday. Gotta get out and hook everything up and see if it fires up and hope that no other problems are found with it so it can be my DD while I work on the '77 since I sold my F150 last week.

Well then HAPPY BIRTHDAY TO YOU! Have a great one.
-Lance

Pushrod226 · 05-13-2008, 07:47 AM

I got the drivers side floor and support/brace welded in. Went to the strip club. Picked up a set of doors for the stepside. Shopped for Mothers day. Bolted and alinged the drivers side door. Changed out the lock, vent window, and inner panel. Removed the old passenger side door. Worked pretty much all day sunday.

ocbaud · 05-13-2008, 08:18 AM

changed my valve cover gaskets over to cork, and now they no longer leak, go figure.

oh, and before that i removed the vacuum advance canister and put in the lockout plate, also installed the correct bushing in the dizzy to give me 35 degrees timing instead of 45.....

the truck runs a lot better now

joeymarkgraf · 05-13-2008, 08:18 AM

Cleaned up my grimy tranny, removed headers and starter, & prepared garage for next week-end. My younger brother and myself are going to pull our first engine, which I'm pretty amped up about, then we're going to watch the top-alcohol drags at woodburn drag strip, which is even better!

Pyrotechnic · 05-13-2008, 08:29 AM

Quote:

Originally Posted by N2TRUX

I spent most of yesterday car shopping with my daughter. It absolutly amazes me that my "baby" girl has suddenly become old enough to get her first car. She has had her heart set on a Hummer H3 for over a year now. Unfortunately the gas prices have crushed her dreams and eliminated that as an option. Instead we have been looking at fuel efficient crosssover SUV's. It's really hard to get excited about anything that gets good mileage...

Today I went to my Mom-n-laws house and had tons of great food.....What did you get done?

Go grab her a *gasp* 2008 Ford Ranger or 2008 Mazda B2300 with a 2.3L 4cyl and 5 speed manual. GREAT gas mileage, and very fun to drive with the 3.73 gears and a motor that just begs to be revved hard to it's 6000 RPM redline. Very affordable too. Besides, a girl from Texas has gotta drive a pickup! The boys at school with the auto transmissions will be scratching their heads too!

S10Fan · 05-13-2008, 11:50 AM

Went to the junkyard Saturday looking for another driver side door. Neighbor's kid destroyed (backed into) mine on Friday. No doors but I did grab a pair of bucket seats ('01 Cavalier), dash speaker, and a wiper delay module.

Hoods69BadBowTie · 05-13-2008, 12:54 PM

Could check out the toyotas as well they got some new decent pickups. I spent yesterday with family because it was my bday as well and then went mudding up in the hills. Way long night because some kids took a car and ended up stuck about 15 miles back in the hills and we decided to go and do the right thing and pull them out plus I almost rolled my Blazer down the hill. I got a drive shaft and new Warn hubs on the '90 Blazer and the 4wd works great now. Spent today with my mom and bros and got some chores done as well.

TexasJeff · 05-13-2008, 02:24 PM

Saturday was spent working on my Mustang, complete brake job, valve cover gaskets, plugs, cap and rotor, then a nice dinner with family and friends. Sunday spent the day over at brother-in-laws with all the moms, great food and even better company

slug · 05-13-2008, 02:59 PM

finaly got the new bypass presure regulator installed for the fuel system. truck runs like a top now. managed to drive the slug around the block a couple of times. then spent most of the weekend on my new 4 wheeler. managed to put new shocks on my dads super crew, what a piece!!

Rooster's82 · 05-13-2008, 03:49 PM

Picked up my truck, all the body work and primer is done...doors need a little tweaking still otherwise it is nice and straight.

Tossed a new carb in and plugs, now it is running better than ever. Although i got a little white smoke this morning when i fired her up...which is unusual.

Installed a new power window motor on the drivers side...no more helping the window open and close!

(that's my GF in the background of the first picture...didn't even know she was in the picture until now.)

**N2TRUX** · 05-13-2008, 03:52 PM

Quote:

Originally Posted by Pyrotechnic

Go grab her a *gasp* 2008 Ford Ranger or 2008 Mazda B2300 ...

She would love to have a truck, but Mom vetoed that option. Since she is very athletic, and has great muscle definition she gets grief from the boys already about being butch. She is def not butch, but Mom thinks driving a truck would add fuel to the fire.

We are considering crossover sized SUV's like the Mazda CX7, Volkswagen Tiguan, and Saturn Vue. So far the Saturn Vue is coimng out on top.

bigblock73 · 05-13-2008, 05:36 PM

Ken, get her an '87 short bed...TBI, OD, etc.. Who care what the wife thinks...get her one too.

babyJay · 05-13-2008, 06:29 PM

Saturday: Scored some 38 inch Swampers from Craigslist for the 79 K20...$225.

Found out my 87 gets just short of 11 MPG highway.

First time I've been brave enough to go any distance with it.

Sunday: Had a "Welcome Home" party for my youngest brother. His guard unit is freshly back from Iraq (It was his 2nd tour there). This was at my Grandmother's place so it was kind of a combo party for Mother's day too.

SCOTI · 05-13-2008, 06:55 PM

Ken, the farther the 'boys' stay away @ this stage in life..... the better. You know it, I know it. It's worse when they have curves.

I finished up installing my freshly rebuilt tilt in the 74. It's nice to have working turn signals, horn & even a horn button. Hopefully the thieves will leave it alone for a while. I'm even arranging all the parts & will be installing the crack free OE dash I picked up off of e-bay a year or two ago. I might just do carpet too..... Only other thing worth mentioning is I made a deal on a new FI drivetrain. Should pick it up sometime this week

.

westie 666 · 05-13-2008, 10:26 PM

Saturday completed sanding 1/4 window frames and dropped off to painter, Sunday spent with the moms then off to work.

gezn2 · 05-14-2008, 01:59 AM

I installed a Mark VIII e-fan and a 'junkyard treasure' 100 amp alternator on saturday, I'll make another post with pix of that and todays 'tuning'

Sunday was spent with Grandma, gotta enjoy the time, the tough old bird is 96 and still 'calls 'em the way she sees 'em'

87Lowrider · 05-14-2008, 06:07 AM

Quote:

Originally Posted by bigblock73

Ken, get her an '87 short bed...TBI, OD, etc.. Who care what the wife thinks...get her one too.

Amen!

harnalien · 05-14-2008, 11:01 AM

took the wife and new baby out to lunch, and ordered my cam kit in the evening for my slooooow build.

05-13-2008, 04:18 AM	#1
N2TRUX Happy to be here Join Date: Mar 2000 Location: Cypress, TX Posts: 39,023	What did you get done? 05/11 Mothers Day edition I spent most of yesterday car shopping with my daughter. It absolutly amazes me that my "baby" girl has suddenly become old enough to get her first car. She has had her heart set on a Hummer H3 for over a year now. Unfortunately the gas prices have crushed her dreams and eliminated that as an option. Instead we have been looking at fuel efficient crosssover SUV's. It's really hard to get excited about anything that gets good mileage... Today I went to my Mom-n-laws house and had tons of great food.....What did you get done? __________________ Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra" Last edited by N2TRUX; 05-13-2008 at 04:22 AM.

05-13-2008, 04:27 AM	#2
vern350 like a rock Join Date: Nov 2004 Location: Ontario, Canada Posts: 517	Re: What did you get done? 05/11 Mothers Day edition bought a new rear bumper for the 81 to replace the roll pan. Can't wait to get it on. NOS GM bumper.

05-13-2008, 04:33 AM	#3
CavScoutsC10 Registered User Join Date: Apr 2008 Location: East Bay, CA Posts: 24	Re: What did you get done? 05/11 Mothers Day edition went to the beach on saturday.. spent sunday with the wife and kids

05-13-2008, 05:09 AM	#4
87Lowrider Navy Radioman Veteran Join Date: Jul 2007 Location: Western Kentucky Posts: 1,350	Re: What did you get done? 05/11 Mothers Day edition Yesterday, I put the radiator in the lowrider, still need to fab up some mounting brackets for it since the truck had a smaller one in there for the 350 that I took out. I guess I'll install electric fans since the shroud won't fit either. Today, we went to my oldests daughters graduation ceremony and then out to eat with the wife. Man I wish it'd stop raining for a while her in KY. I feel like I'm back in Seattle. Kenny __________________ 1987 Chevrolet R10 Silverado BBC Build thread - SOLD 1986 GMC Sierra Classic - SOLD 1957 Chevy Step Side - At the Body Shop Daily Driver; 2005 Chevrolet Silverado 4x4 Z71 Stepside

05-13-2008, 05:25 AM	#5
HanSoloWS6 Registered User Join Date: Mar 2004 Location: Dayton, Ohio Posts: 122	Re: What did you get done? 05/11 Mothers Day edition I tried getting the beast to fire, but a leak in my fuel line is letting air in. So, when I get some spare time, I'll be tracing the leak and getting air out of the lines. I really want to drive my truck again, but I'm beginning to seriously consider just starting the dismantling process so I can start restoring it and getting it on the ground. Spent the rest of the weekend with the wife and family. __________________ "Locomotion" - 1982 C10 LWB 6.2 to 6.5 HUMVEE non turbo swap complete Pop's Garage Photography - Dayton, Ohio My Truck Build Page

05-13-2008, 06:39 AM	#7
SBellew Registered User Join Date: Apr 2008 Location: Attalla, AL Posts: 60	Re: What did you get done? 05/11 Mothers Day edition Its my birthday today so I decided to take the day off (ground was too wet to cut grass, lay under the '85 and hook up the exhaust and try to get the 2nd motor mount bolt started (first went in like a champ first try. Dropped the 350 and trans in yesterday. Gotta get out and hook everything up and see if it fires up and hope that no other problems are found with it so it can be my DD while I work on the '77 since I sold my F150 last week. __________________ ~Scot '77 C10 My build thread (Its a slow one)

05-13-2008, 07:47 AM	#9
Pushrod226 Registered User Join Date: Mar 2008 Location: Joliet IL. Posts: 64	Re: What did you get done? 05/11 Mothers Day edition I got the drivers side floor and support/brace welded in. Went to the strip club. Picked up a set of doors for the stepside. Shopped for Mothers day. Bolted and alinged the drivers side door. Changed out the lock, vent window, and inner panel. Removed the old passenger side door. Worked pretty much all day sunday.

05-13-2008, 08:18 AM	#10
ocbaud Garage Queen Material Join Date: Oct 2002 Location: USA Posts: 4,129	Re: What did you get done? 05/11 Mothers Day edition changed my valve cover gaskets over to cork, and now they no longer leak, go figure. oh, and before that i removed the vacuum advance canister and put in the lockout plate, also installed the correct bushing in the dizzy to give me 35 degrees timing instead of 45..... the truck runs a lot better now

05-13-2008, 08:18 AM	#11
joeymarkgraf Registered User Join Date: Dec 2006 Location: Corvallis, OR Posts: 47	Re: What did you get done? 05/11 Mothers Day edition Cleaned up my grimy tranny, removed headers and starter, & prepared garage for next week-end. My younger brother and myself are going to pull our first engine, which I'm pretty amped up about, then we're going to watch the top-alcohol drags at woodburn drag strip, which is even better! Attached Images

05-13-2008, 11:50 AM	#13
S10Fan Old Heap Driver Join Date: Mar 2008 Location: Newport News, Va Posts: 2,640	Re: What did you get done? 05/11 Mothers Day edition Went to the junkyard Saturday looking for another driver side door. Neighbor's kid destroyed (backed into) mine on Friday. No doors but I did grab a pair of bucket seats ('01 Cavalier), dash speaker, and a wiper delay module. Attached Images __________________ _____________________________ Bryan '99 Silverado 1500, 4.3, 5-speed, reg cab, short bed '50 Chevy 2DR Hard Top, 350/350, M2 Front End, 3:08 gear, cruiser. '40 F**d Sedan, all Chevy power, Heidt's front end, TCI rear, nice driver.

05-13-2008, 12:54 PM	#14
Hoods69BadBowTie Chevys Kick A$$ Join Date: Jan 2005 Location: Zootown, MT Posts: 12,699	Re: What did you get done? 05/11 Mothers Day edition Could check out the toyotas as well they got some new decent pickups. I spent yesterday with family because it was my bday as well and then went mudding up in the hills. Way long night because some kids took a car and ended up stuck about 15 miles back in the hills and we decided to go and do the right thing and pull them out plus I almost rolled my Blazer down the hill. I got a drive shaft and new Warn hubs on the '90 Blazer and the 4wd works great now. Spent today with my mom and bros and got some chores done as well. __________________ HOODS is what I answer too -'79, '77, '88 Pickup Sold, '85 Camaro, '83 T/A, '81,'83,'90 K5 Blazer All Sold -'79 3/4 ton "Big Yellow Bananna" Lifted 4spd. 39.5 TSL Swampers, The money Pit -'86 K5 Blazer Silverado 6.2 4" lift 35"s -'95 Ext. Cab Shorty 4" Tuff Country rolling 35" M/T's -'83 Monte Carlo T-Tops. 126,500 Original Miles -LATER I would rather push a Chevy then drive a ford!!

05-13-2008, 02:24 PM	#15
TexasJeff Don't Crush em Restore em Join Date: Aug 2004 Location: Pinehurst, Texas Posts: 764	Re: What did you get done? 05/11 Mothers Day edition Saturday was spent working on my Mustang, complete brake job, valve cover gaskets, plugs, cap and rotor, then a nice dinner with family and friends. Sunday spent the day over at brother-in-laws with all the moms, great food and even better company __________________ TexasJeff 2009 Silver with Linen Interior Cadillac DTS 1990 Red with White Top and Interior Ford Mustang GT convertible 1998 Red with Gray Interior, C3500 Chevy Crew Cab Dually

05-13-2008, 02:59 PM	#16
slug Registered User Join Date: Jan 2008 Location: Groves,TX Posts: 483	Re: What did you get done? 05/11 Mothers Day edition finaly got the new bypass presure regulator installed for the fuel system. truck runs like a top now. managed to drive the slug around the block a couple of times. then spent most of the weekend on my new 4 wheeler. managed to put new shocks on my dads super crew, what a piece!! __________________ there is nothing better than cutting metal with fire.......except cutting metal with electricity!!! Last edited by slug; 05-13-2008 at 03:00 PM.

05-13-2008, 03:49 PM	#17
Rooster's82 Registered User Join Date: Mar 2008 Location: Clearwater FL Posts: 271	Re: What did you get done? 05/11 Mothers Day edition Picked up my truck, all the body work and primer is done...doors need a little tweaking still otherwise it is nice and straight. Tossed a new carb in and plugs, now it is running better than ever. Although i got a little white smoke this morning when i fired her up...which is unusual. Installed a new power window motor on the drivers side...no more helping the window open and close! (that's my GF in the background of the first picture...didn't even know she was in the picture until now.) Attached Images __________________ JG If you can't find it at the junk yard you don't need it. Last edited by Rooster's82; 05-13-2008 at 03:52 PM.

05-13-2008, 05:36 PM	#19
bigblock73 yeller Join Date: Oct 2001 Location: Twin Cities Posts: 13,826	Re: What did you get done? 05/11 Mothers Day edition Ken, get her an '87 short bed...TBI, OD, etc.. Who care what the wife thinks...get her one too. __________________ Jeff 73-87.com 73-87.com Facebook page 73-87 cab corner 6x9 speaker brackets for sale 67-72 cab corner speaker brackets for sale 47-54 cab corner speaker brackets for sale Last edited by bigblock73; 05-13-2008 at 05:36 PM.



Register or Log In To remove these advertisements.

05-13-2008, 06:29 PM	#20
babyJay Arrived on a Pale Horse Join Date: Mar 2007 Location: SnagTown Indiana Posts: 2,524	Re: What did you get done? 05/11 Mothers Day edition Saturday: Scored some 38 inch Swampers from Craigslist for the 79 K20...$225. Found out my 87 gets just short of 11 MPG highway. First time I've been brave enough to go any distance with it. Sunday: Had a "Welcome Home" party for my youngest brother. His guard unit is freshly back from Iraq (It was his 2nd tour there). This was at my Grandmother's place so it was kind of a combo party for Mother's day too. __________________ Jason 87 V30 350TBI/400 White w/Boss V-plow 89 R3500 CC SRW

05-13-2008, 06:55 PM	#21
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 21,938	Re: What did you get done? 05/11 Mothers Day edition Ken, the farther the 'boys' stay away @ this stage in life..... the better. You know it, I know it. It's worse when they have curves. I finished up installing my freshly rebuilt tilt in the 74. It's nice to have working turn signals, horn & even a horn button. Hopefully the thieves will leave it alone for a while. I'm even arranging all the parts & will be installing the crack free OE dash I picked up off of e-bay a year or two ago. I might just do carpet too..... Only other thing worth mentioning is I made a deal on a new FI drivetrain. Should pick it up sometime this week . __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.* Last edited by SCOTI; 05-13-2008 at 07:01 PM.

05-13-2008, 10:26 PM	#22
westie 666 Registered User Join Date: Mar 2008 Location: AUCKLAND NZ Posts: 264	Re: What did you get done? 05/11 Mothers Day edition Saturday completed sanding 1/4 window frames and dropped off to painter, Sunday spent with the moms then off to work. __________________ 77 Cheyenne no longer in bits

05-14-2008, 01:59 AM	#23
gezn2 Registered User Join Date: Dec 2007 Location: Livingston WI Posts: 65	Re: What did you get done? 05/11 Mothers Day edition I installed a Mark VIII e-fan and a 'junkyard treasure' 100 amp alternator on saturday, I'll make another post with pix of that and todays 'tuning' Sunday was spent with Grandma, gotta enjoy the time, the tough old bird is 96 and still 'calls 'em the way she sees 'em'

05-14-2008, 11:01 AM	#25
harnalien TruckincrazY Join Date: May 2004 Location: Haslet, TX Posts: 493	Re: What did you get done? 05/11 Mothers Day edition took the wife and new baby out to lunch, and ordered my cam kit in the evening for my slooooow build.

Register or Log In To remove these advertisements.