Restored 1969 Chevy P/U needing motor - cheap! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

hotrodkev · 05-16-2008, 07:05 PM

I just took these pictures last week I don't think the pictures do the truck justice.

I left the information about the motor included in my information because the motor is still in the truck, it is making some noise and I am just tired of sinking more and more money into this build. I am selling it with the transmission but without the motor.

Frame up restored 1969 Chevy Fleetside long wheelbase
Original two tone paint scheme, dodge viper blue and chevy white
What little rust was on original body was cut out and replaced with metal, no bondo or fiberglass.
Sprayed in bedliner and underneath the entire body to prevent any rust from starting in the future
Original 15X8 rally wheels, new tires
383 stroker, 10.5:1 compression, all ARP stainless 12-point bolts used on motor, heads ported and running 2.05 intake 1.65 exhaust, 1.5 aluminum roller rockers, howards cam: flat tappet 525 525 & 106 lobe seperation, edelbrock performer rpm aluminum intake, jegs sfi certified flexplate, 750 street demon carburetor, super comp Hooker Headers, MSD pro billet distributor, blaster 2 coil, 6AL ignition box, 8.5 msd wires, moroso stroker oil pan (powdercoated silver to match other aluminum on motor), high perf. jegs starter (can handle 15:1 compression), edelbrock performer rpm mechanical fuel pump, weiand aluminum water pump and timing chain cover, 4 core radiator with a 16" electric fan, yellow top optima battery, 2.5 inch exhaust with x-pipe into 2-chamber flowmasters that dump behind each rear tire
TH-400 Tranny, 2500 stall, shift kit, Hurst ratchet shifter
One piece driveshaft, 3.73 Yukon gear with an Eaton posi
Tilt, a/c, tachometer, power steering, power brakes - Loaded!
Converted both front suspension and rear end to 71' year model so I could run 5 lug wheels and have disc brakes up front.

Work needed: seat reupholstered - if you want it to be perfect (has a small crack), body trim and interior door panels (have armrests).

The truck has 115 miles since the restoration, I have over 20K invested.

I am asking $8,000 I will consider trades..........located northwest of Houston.

PM me for any additional info or give me a call (281) 415-4933 - Kevin

AJs72K5 · 05-16-2008, 07:46 PM

This really needs to be in the For Sale section. And you need to be a member to post these as well. The mods will likely edit it soon.

Great looking truck though.

hotrodkev · 05-16-2008, 07:50 PM

I will move it over there...but I am a member?? Something else I don't know?

49m · 05-16-2008, 07:57 PM

need to be paying member

hotrodkev · 05-16-2008, 08:07 PM

Quote:

Originally Posted by 49m

need to be paying member

PM Sent

hotrodkev · 05-16-2008, 08:14 PM

Ok ok...I found it. Sending the paypal money as we speak.

jkaylor68gmc · 05-16-2008, 08:15 PM

board police board police.

hotrodkev · 05-16-2008, 08:17 PM

Damn snitches chill out I'm a noob. Didn't know I had to pay, I have payed now. Just waiting to hear back from the website so i can put it up for sale in the correct section.

72BlckButy · 05-16-2008, 09:25 PM

Once you've turned blue you should be able to post in the for sale board, and you're blue so go for it!

Can't believe you're going to sell such a great looking truck!

hotrodkev · 05-16-2008, 09:47 PM

Quote:

Originally Posted by 72BlckButy

Once you've turned blue you should be able to post in the for sale board, and you're blue so go for it!

Can't believe you're going to sell such a great looking truck!

I can't believe I am either.

I don't want to, I need to. Thanks for the kind words though.

jkaylor68gmc · 05-16-2008, 10:26 PM

Welcome to the board, don't let the haters get to ya. they are rough but kind here.

hotrodkev · 05-16-2008, 10:30 PM

Quote:

Originally Posted by jkaylor68gmc

Welcome to the board, don't let the haters get to ya. they are rough but kind here.

Thanks for the warm welcome, I will keep the advise in mind... HATERS =

Jtrux · 05-16-2008, 11:25 PM

Call em haters, call em what you want but you posted a truck for sale in the wrong forum...knowbody to get upset with here, you made the mistake.

jkaylor68gmc · 05-16-2008, 11:36 PM

I said they were haters.

hotrodkev · 05-16-2008, 11:37 PM

Quote:

Originally Posted by Jtrux

Call em haters, call em what you want but you posted a truck for sale in the wrong forum...knowbody to get upset with here, you made the mistake.

Thank you forum police officer, if it really bothers you that much I will erase the thread so you aren't tempted to come in here and point fingers again.

Move along please, thank you.

hotrodkev · 05-16-2008, 11:38 PM

Quote:

Originally Posted by jkaylor68gmc

I said they were haters.

Man you weren't lying, I am fighting them off one at a time.

jkaylor68gmc · 05-17-2008, 03:34 PM

It's all right I have made that same mistake its cool. Everyone on here is pretty cool though.

HuggerCST · 05-17-2008, 04:28 PM

Moved.

420am · 05-17-2008, 08:40 PM

Looks like a gorgeous truck. Might post up some interior pics as well.

hotrodkev · 05-17-2008, 09:06 PM

Quote:

Originally Posted by 420am

Looks like a gorgeous truck. Might post up some interior pics as well.

I agree, just haven't had a chance....will probably take care of that this weekend.

Sammy · 05-18-2008, 02:51 AM

My my beautiful truck. TTT good luck.

hotrodkev · 05-18-2008, 05:43 AM

Quote:

Originally Posted by Sammy

My my beautiful truck. TTT good luck.

Thank you sir.

GMC AMI · 05-19-2008, 07:54 PM

It is nice, I have to ask you why did you list the motor and all it's goodies if the motor is coming out and not for sale?

hotrodkev · 05-19-2008, 10:28 PM

Quote:

Originally Posted by GMC AMI

It is nice, I have to ask you why did you list the motor and all it's goodies if the motor is coming out and not for sale?

Cause 90% of the people that have been interested in my truck ask if I will sell the truck WITH the motor and then want to know all about the motor. Just knocking out 2 birds with one stone, thats all.

GMC AMI · 05-19-2008, 10:32 PM

Quote:

Originally Posted by hotrodkev

Cause 90% of the people that have been interested in my truck ask if I will sell the truck WITH the motor and then want to know all about the motor. Just knocking out 2 birds with one stone, thats all.

Well if 90 % ask then why don't you just list a price? Thanks, hope you do well with your sale.

05-16-2008, 07:05 PM	#1
hotrodkev Noob Join Date: Feb 2008 Location: Houston, Texas Posts: 29	Restored 1969 Chevy P/U needing motor - cheap! I just took these pictures last week I don't think the pictures do the truck justice. I left the information about the motor included in my information because the motor is still in the truck, it is making some noise and I am just tired of sinking more and more money into this build. I am selling it with the transmission but without the motor. Frame up restored 1969 Chevy Fleetside long wheelbase Original two tone paint scheme, dodge viper blue and chevy white What little rust was on original body was cut out and replaced with metal, no bondo or fiberglass. Sprayed in bedliner and underneath the entire body to prevent any rust from starting in the future Original 15X8 rally wheels, new tires 383 stroker, 10.5:1 compression, all ARP stainless 12-point bolts used on motor, heads ported and running 2.05 intake 1.65 exhaust, 1.5 aluminum roller rockers, howards cam: flat tappet 525 525 & 106 lobe seperation, edelbrock performer rpm aluminum intake, jegs sfi certified flexplate, 750 street demon carburetor, super comp Hooker Headers, MSD pro billet distributor, blaster 2 coil, 6AL ignition box, 8.5 msd wires, moroso stroker oil pan (powdercoated silver to match other aluminum on motor), high perf. jegs starter (can handle 15:1 compression), edelbrock performer rpm mechanical fuel pump, weiand aluminum water pump and timing chain cover, 4 core radiator with a 16" electric fan, yellow top optima battery, 2.5 inch exhaust with x-pipe into 2-chamber flowmasters that dump behind each rear tire TH-400 Tranny, 2500 stall, shift kit, Hurst ratchet shifter One piece driveshaft, 3.73 Yukon gear with an Eaton posi Tilt, a/c, tachometer, power steering, power brakes - Loaded! Converted both front suspension and rear end to 71' year model so I could run 5 lug wheels and have disc brakes up front. Work needed: seat reupholstered - if you want it to be perfect (has a small crack), body trim and interior door panels (have armrests). The truck has 115 miles since the restoration, I have over 20K invested. I am asking $8,000 I will consider trades..........located northwest of Houston. PM me for any additional info or give me a call (281) 415-4933 - Kevin Last edited by hotrodkev; 05-19-2008 at 10:55 PM.

05-16-2008, 07:46 PM	#2
AJs72K5 Registered User Join Date: Nov 2007 Location: South Tx Posts: 1,083	Re: Restored 1969 Chevy P/U needing motor - cheap! This really needs to be in the For Sale section. And you need to be a member to post these as well. The mods will likely edit it soon. Great looking truck though. __________________ - AJ Gray Matter Build - 1972 K5 with some stuff

05-16-2008, 07:50 PM	#3
hotrodkev Noob Join Date: Feb 2008 Location: Houston, Texas Posts: 29	Re: Restored 1969 Chevy P/U needing motor - cheap! I will move it over there...but I am a member?? Something else I don't know?

05-16-2008, 07:57 PM	#4
49m Registered User Join Date: Aug 2007 Location: Turners Station,Ky Posts: 842	Re: Restored 1969 Chevy P/U needing motor - cheap! need to be paying member __________________ My Rides 1969 Mustang gt coupe 1971 Chevy Cheyenne 1986 Iroc camaro 1986 K10 Short Bed 1987 Iroc Camaro 1990 rs Camaro 1992 350 ss truck 1998 Honda Civic 2005 Ram 2500 Cummins My Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=279831

05-16-2008, 08:14 PM	#6
hotrodkev Noob Join Date: Feb 2008 Location: Houston, Texas Posts: 29	Re: Restored 1969 Chevy P/U needing motor - cheap! Ok ok...I found it. Sending the paypal money as we speak.

05-16-2008, 08:15 PM	#7
jkaylor68gmc Senior Member Join Date: Dec 2005 Location: TN Posts: 2,448	Re: Restored 1969 Chevy P/U needing motor - cheap! board police board police. __________________ 1947 International KB-1 1957 Chevy Bel-Air riding low 1962 swb fleetside 2002 Chevrolet Silverado 7-inch lift on 35 Daily driver 2016 Chevy Tahoe Better halves ride

05-16-2008, 08:17 PM	#8
hotrodkev Noob Join Date: Feb 2008 Location: Houston, Texas Posts: 29	Re: Restored 1969 Chevy P/U needing motor - cheap! Damn snitches chill out I'm a noob. Didn't know I had to pay, I have payed now. Just waiting to hear back from the website so i can put it up for sale in the correct section.

05-16-2008, 09:25 PM	#9
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: Restored 1969 Chevy P/U needing motor - cheap! Once you've turned blue you should be able to post in the for sale board, and you're blue so go for it! Can't believe you're going to sell such a great looking truck! __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package) Last edited by 72BlckButy; 05-16-2008 at 09:28 PM.

05-16-2008, 10:26 PM	#11
jkaylor68gmc Senior Member Join Date: Dec 2005 Location: TN Posts: 2,448	Re: Restored 1969 Chevy P/U needing motor - cheap! Welcome to the board, don't let the haters get to ya. they are rough but kind here. __________________ 1947 International KB-1 1957 Chevy Bel-Air riding low 1962 swb fleetside 2002 Chevrolet Silverado 7-inch lift on 35 Daily driver 2016 Chevy Tahoe Better halves ride

05-16-2008, 11:25 PM	#13
Jtrux I'm a poor spectator Join Date: Aug 2006 Location: San Antonio, Tx Posts: 2,287	Re: Restored 1969 Chevy P/U needing motor - cheap! Call em haters, call em what you want but you posted a truck for sale in the wrong forum...knowbody to get upset with here, you made the mistake. __________________ 2006 Jeep Unlimited IMPACT ORANGE 1993 Chevy 2500 4x4 ExCab LWB 454/NV4500 Tow rig 1977 Ford F100 2x4 LWB 1st truck I owned, still have it!!! 1979 Ford F150 4x4 SWB Built Ford Tough!!! 1971 Chevy Blazer 350 / SM465 / NP205 UNDER CONSTRUCTION Soon to have a LQ4 6.0!!!

05-16-2008, 11:36 PM	#14
jkaylor68gmc Senior Member Join Date: Dec 2005 Location: TN Posts: 2,448	Re: Restored 1969 Chevy P/U needing motor - cheap! I said they were haters. __________________ 1947 International KB-1 1957 Chevy Bel-Air riding low 1962 swb fleetside 2002 Chevrolet Silverado 7-inch lift on 35 Daily driver 2016 Chevy Tahoe Better halves ride

05-17-2008, 03:34 PM	#17
jkaylor68gmc Senior Member Join Date: Dec 2005 Location: TN Posts: 2,448	Re: Restored 1969 Chevy P/U needing motor - cheap! It's all right I have made that same mistake its cool. Everyone on here is pretty cool though. __________________ 1947 International KB-1 1957 Chevy Bel-Air riding low 1962 swb fleetside 2002 Chevrolet Silverado 7-inch lift on 35 Daily driver 2016 Chevy Tahoe Better halves ride

05-17-2008, 04:28 PM	#18
HuggerCST Registered User Join Date: Jul 2001 Location: North Louisiana Posts: 4,501	Re: Restored 1969 Chevy P/U needing motor - cheap! Moved. __________________ Wynne 70 CST short fleet Hugger orange & white, 350/350, ps, pb, air, tilt, tach/vac/speedwarning, original buckets, AM/FM, oak bed floor, shoulder belts, 3.5"/5.5" drop, 20" American Racing VN425s. Build thread 53 Chevy shortbed 69 Camaro Click here to subscribe Chevy GMC International Truck Club Louisiana Charter Member http://www.louisianaclassictruckclub.com

05-17-2008, 08:40 PM	#19
420am Registered User Join Date: Feb 2008 Location: Madison, WI Posts: 357	Re: Restored 1969 Chevy P/U needing motor - cheap! Looks like a gorgeous truck. Might post up some interior pics as well. __________________ 1972 Long Bed Cheyenne Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=285282 Waste my bandwidth and listen to some great tunes >> http://www.radioxenu.com (Live Shows with yours truly every Friday)

05-18-2008, 02:51 AM	#21
Sammy Registered User Join Date: Apr 2000 Location: Bonne Terre, Mo Posts: 3,005	Re: Restored 1969 Chevy P/U needing motor - cheap! My my beautiful truck. TTT good luck. __________________ '69 Chevy Long Fleet & '71 GMC Short Step & Project "ODD BALL" "You can wash a pig, soak it in most expensive perfume. In the end it is still just a pig." ODD BALL build thread http://67-72chevytrucks.com/vboard/s...d.php?t=478629"



Register or Log In To remove these advertisements.

05-19-2008, 07:54 PM	#23
GMC AMI Registered User Join Date: Apr 2004 Location: The Other Maine! Posts: 2,236	Re: Restored 1969 Chevy P/U needing motor - cheap! It is nice, I have to ask you why did you list the motor and all it's goodies if the motor is coming out and not for sale?

Register or Log In To remove these advertisements.