72 swb GMC leaf spring rear 2wd all or part - The 1947 - Present Chevrolet & GMC Truck Message Board Network

teeitup · 05-19-2008, 06:58 PM

I have a guy coming Mon to look at it for $1100, so thats the price for it complete. Its a running truck with clear title, the carrier bearing went out, so it doesn't have it or front part of drive shaft. Runs but smokes, its a automatic with a b&m floor shifter, AC truck but brackets and compressor are gone, Power steering and power brakes. I think it has new disc brake setup on the drivers side. Not a whole lot of rust. Bed isn't bad, cab isn't bad either, rockers and corners have some rust, one mount. Driver door the upper hinge area is cracked out, but no rust. Pass door has very small amount in front corner. I have a decent chrome front bumper to go with it. I'll give this guy first shot and anybody else a couple days then if it doesn't sell I'll part it out. Thanks Randy

buffle · 05-19-2008, 07:22 PM

Randy we talked before about rear end. If you do part this, i would like to be 1st in line for rear end.

**88JRFAN** · 05-19-2008, 07:24 PM

Hey Randy, if you end up parting, I need the headlight harness(if not to butchered). Thanks Daren

71HUGGER396 · 05-19-2008, 09:52 PM

If you part this out, put me in line for all the power steering stuff. All the pulleys, brackets and bolts, everything. Thanks.

**fine69** · 05-19-2008, 11:44 PM

How about a better picture of the rear bumper? Bends? rust?

*ksjh1316* · 05-20-2008, 01:02 AM

If you part let me know about all the A/C stuff brackets parts all of it. The only thing I don't need is the controller may. Also may be interested in the exaust manifolds and alt bracket. If you have any questions give me a call

I need to read better did not see the brackets and compressor were missing sorry

**special-K** · 05-20-2008, 02:09 AM

Interested in the under hood a/c box if undamaged.

cnshoot · 05-20-2008, 02:22 AM

how much for the short fleet bed in pic and for the top of grille

Goin4aPutt · 05-20-2008, 03:33 AM

If you part it, I'm interested in the door panels w/ arm rests, seat belts, dash pad, sun visors and possibly the seat. Thanks.

**72ironmike** · 05-20-2008, 03:36 AM

If the rear is a 307 and falls down let me know.

andrewt2 · 05-20-2008, 05:34 AM

how much for the back up lamp assemblies if you part this?

N2GMTrux · 05-20-2008, 06:17 AM

How much for the spare tire carrer on the drivers bedside. Shipping to Ft Worth, TX

andrewt2 · 05-20-2008, 02:42 PM

hopefully someone buys it whole it would look like its almost worth saving to me,

teeitup · 05-20-2008, 03:06 PM

Guys I'll let you know what this guys says and then I'll decide Tues evening if I'm going to part it out. Thanks Randy

deputyd_0803 · 05-22-2008, 08:08 PM

Gonna part out? If so, can I get price on b&m shifter shipped to 84770? Thanks

teeitup · 05-23-2008, 12:12 AM

OK guys it looks like it will get parted but I won't be able to start on it till next week after the holiday, wife has plans for me this weekend
Please let me know if still interested in the parts you asked about since I priced them?
Buffle, $100 for complete rear end, I cut the ubolts with a torch.
88jrfan, Daren, I'll check it out
71hugger396, $90 plus shipping for ps box, pump and all brackets, hoses, all pullies.
fine69, it has rust in it
ksjh, Jeff, I have all the AC brackets off this truck $75 for all them. Rest of AC stuff $125. Exhaust manifolds $50 for pair, Alt brackets $20 for pair. I can't find your phone number around here, sorry
Special_K, Tim, I need to get it off and make sure it doesn't have any rust on the backside, I also priced it to Jeff with other AC stuff so he has first dibs
Cnshoot, thats a lwb bed sitting in the pic and its sold. I need to look at top bar of grill and see condition
Goin4aputt, dash pad is bad and so is the seat. Door panels $30 and visors $20, 3 person seat belts if good $30 plus shipping
72ironmike, I got one guy ahead of you on it
andrew2t, you need the brackets?
N2gmtrux, I may have the bed sold locally, I should know this weekend
DeputyD, $25 plus shipping for the shifter
Thanks Randy

andrewt2 · 05-23-2008, 02:16 AM

randy yes i need brackets too.

buffle · 05-23-2008, 02:34 AM

Randy u let me know when u are ready. I`ve waited this long, not in a hurry now.

deputyd_0803 · 05-23-2008, 03:04 AM

I will take the shifter. Just let me know when you are ready for payment...

Goin4aPutt · 05-23-2008, 03:35 AM

Randy, I'm still interested in the door panels w/ arm rests, visors & 3 person seat belts. Whenever you have a chance, please let me know what condition everything is in. No hurry. Have a great weekend!

rawraw67 · 05-23-2008, 03:42 AM

will you sell the valve covers,can I get a better picture ?

**88JRFAN** · 05-23-2008, 05:23 AM

Hey there Randy, if's it's good I will take it. Next week will be fine, in no hurry. 67401.Thanks Daren

kingsolver72 · 05-23-2008, 06:02 AM

Kansas title?How much for frame and title?

*ksjh1316* · 05-23-2008, 06:24 AM

Randy PM sent. Was this one long or short water pump

71HUGGER396 · 05-23-2008, 09:39 AM

O.K.,I WILL TAKE THE POWER STEERING STUFF.My zip is 16055. Let me know what shipping is, and how you want paid, Thank you.

05-19-2008, 06:58 PM	#1
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	72 swb GMC leaf spring rear 2wd all or part I have a guy coming Mon to look at it for $1100, so thats the price for it complete. Its a running truck with clear title, the carrier bearing went out, so it doesn't have it or front part of drive shaft. Runs but smokes, its a automatic with a b&m floor shifter, AC truck but brackets and compressor are gone, Power steering and power brakes. I think it has new disc brake setup on the drivers side. Not a whole lot of rust. Bed isn't bad, cab isn't bad either, rockers and corners have some rust, one mount. Driver door the upper hinge area is cracked out, but no rust. Pass door has very small amount in front corner. I have a decent chrome front bumper to go with it. I'll give this guy first shot and anybody else a couple days then if it doesn't sell I'll part it out. Thanks Randy Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure" Last edited by teeitup; 05-19-2008 at 07:01 PM.

05-19-2008, 07:22 PM	#2
buffle buffle Join Date: Sep 2004 Location: Independence, Mo Posts: 426	Re: 72 swb GMC leaf spring rear 2wd all or part Randy we talked before about rear end. If you do part this, i would like to be 1st in line for rear end.

05-19-2008, 07:24 PM	#3
88JRFAN LET'S GO RACIN' Join Date: Oct 2007 Location: SALINA,KS Posts: 1,212	Re: 72 swb GMC leaf spring rear 2wd all or part Hey Randy, if you end up parting, I need the headlight harness(if not to butchered). Thanks Daren __________________ Daren 04 Chevy Extend cab 2500HD 6.0 Liter 4x4 71 CHEVY 3/4 4X4 402 BB, th400/np205, dana44/eaton ho52 w/4:10-TOY Rip El Jay RIP BOBBO'S MOM

05-19-2008, 09:52 PM	#4
71HUGGER396 Confirmed Truckaholic Join Date: Oct 2000 Location: Sarver,PA 16055 Posts: 732	Re: 72 swb GMC leaf spring rear 2wd all or part If you part this out, put me in line for all the power steering stuff. All the pulleys, brackets and bolts, everything. Thanks. __________________ 1968 50th STEP SIDE SHORTY, 350/350, a/c, ps, p,b Daily Driver, 1970 Cst short fleet, all black, 350/350, 1970 2wd Blazer, 2wd, 6 cyl. 3 spd, original, now a 454, 350turbo, 3.73 posi, on the road 1971 2wd fleet shorty, 454, 700r4, 3.73 posi, SOLD to 67OLDSTYLE72 "My rig's a little old but that don't mean she's slow" - SAWYER BROWN's Six Days On The Road SEMPER FI "I use to be a lean mean fighting machine, but now I'm a huffin, puffin, over stuffin love muffin"

05-19-2008, 11:44 PM	#5
fine69 Senior Member Join Date: Dec 1999 Location: Urbana,Ohio,USA Posts: 4,618	Re: 72 swb GMC leaf spring rear 2wd all or part How about a better picture of the rear bumper? Bends? rust? __________________ 2008 Chevy HHR 1/2 panel. 1949 Chevy Panel truck(just sittin, waiting) Board member #6

05-20-2008, 01:02 AM	#6
ksjh1316 Account Suspended Join Date: Jul 2007 Location: Wichita KS Posts: 1,599	Re: 72 swb GMC leaf spring rear 2wd all or part If you part let me know about all the A/C stuff brackets parts all of it. The only thing I don't need is the controller may. Also may be interested in the exaust manifolds and alt bracket. If you have any questions give me a call I need to read better did not see the brackets and compressor were missing sorry Last edited by ksjh1316; 05-20-2008 at 04:49 AM.

05-20-2008, 02:09 AM	#7
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: 72 swb GMC leaf spring rear 2wd all or part Interested in the under hood a/c box if undamaged. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

05-20-2008, 02:22 AM	#8
cnshoot Registered User Join Date: Jan 2003 Location: minden Posts: 358	Re: 72 swb GMC leaf spring rear 2wd all or part how much for the short fleet bed in pic and for the top of grille __________________ 72 cst 2wd blazer sb soon to have tilt manual 72 gmc swb fleet 2wd bb air tilt auto 93 c/3500 crew-cab dually 03 chevy suburban LT quadrasteer c/2500 4x4

05-20-2008, 03:33 AM	#9
Goin4aPutt Registered User Join Date: Mar 2008 Location: Lincolnton, NC Posts: 38	Re: 72 swb GMC leaf spring rear 2wd all or part If you part it, I'm interested in the door panels w/ arm rests, seat belts, dash pad, sun visors and possibly the seat. Thanks. __________________ Mike MSgt USAF (Ret) '72 Custom/20 '77 H-D Ironhead Sportster (wife's) '82 H-D FXB Sturgis '05 Trailblazer LT (wife's)

05-20-2008, 03:36 AM	#10
72ironmike Senior Member Join Date: Jan 2004 Location: Olathe KS (Greater Kansas City MO Area) Posts: 2,057	Re: 72 swb GMC leaf spring rear 2wd all or part If the rear is a 307 and falls down let me know.

05-20-2008, 05:34 AM	#11
andrewt2 Registered User Join Date: Oct 2007 Location: Carbondale, Kansas Posts: 547	Re: 72 swb GMC leaf spring rear 2wd all or part how much for the back up lamp assemblies if you part this?

05-20-2008, 06:17 AM	#12
N2GMTrux Registered User Join Date: Jan 2007 Location: Fort Worth, TX 76133 Posts: 406	Re: 72 swb GMC leaf spring rear 2wd all or part How much for the spare tire carrer on the drivers bedside. Shipping to Ft Worth, TX __________________ ...try'n to be a little! This is a great site. http://67-72chevytrucks.com/vboard/s...d.php?t=157669 http://www.67-72chevytrucks.com/vboa...d.php?t=375640

05-20-2008, 02:42 PM	#13
andrewt2 Registered User Join Date: Oct 2007 Location: Carbondale, Kansas Posts: 547	Re: 72 swb GMC leaf spring rear 2wd all or part hopefully someone buys it whole it would look like its almost worth saving to me,

05-20-2008, 03:06 PM	#14
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: 72 swb GMC leaf spring rear 2wd all or part Guys I'll let you know what this guys says and then I'll decide Tues evening if I'm going to part it out. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

05-22-2008, 08:08 PM	#15
deputyd_0803 Registered User Join Date: Apr 2008 Location: St. George, UT Posts: 77	Re: 72 swb GMC leaf spring rear 2wd all or part Gonna part out? If so, can I get price on b&m shifter shipped to 84770? Thanks __________________ The ONLY way to go. 1972 C20 Custom Deluxe: Rebuilt 402 hopped up a bit, th400 with shift kit, Dana 60(wanna have posi), New solid, no cancer, cab. B & M Starshifter floor shifter.



Register or Log In To remove these advertisements.

05-23-2008, 12:12 AM	#16
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: 72 swb GMC leaf spring rear 2wd all or part OK guys it looks like it will get parted but I won't be able to start on it till next week after the holiday, wife has plans for me this weekend Please let me know if still interested in the parts you asked about since I priced them? Buffle, $100 for complete rear end, I cut the ubolts with a torch. 88jrfan, Daren, I'll check it out 71hugger396, $90 plus shipping for ps box, pump and all brackets, hoses, all pullies. fine69, it has rust in it ksjh, Jeff, I have all the AC brackets off this truck $75 for all them. Rest of AC stuff $125. Exhaust manifolds $50 for pair, Alt brackets $20 for pair. I can't find your phone number around here, sorry Special_K, Tim, I need to get it off and make sure it doesn't have any rust on the backside, I also priced it to Jeff with other AC stuff so he has first dibs Cnshoot, thats a lwb bed sitting in the pic and its sold. I need to look at top bar of grill and see condition Goin4aputt, dash pad is bad and so is the seat. Door panels $30 and visors $20, 3 person seat belts if good $30 plus shipping 72ironmike, I got one guy ahead of you on it andrew2t, you need the brackets? N2gmtrux, I may have the bed sold locally, I should know this weekend DeputyD, $25 plus shipping for the shifter Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

05-23-2008, 02:16 AM	#17
andrewt2 Registered User Join Date: Oct 2007 Location: Carbondale, Kansas Posts: 547	Re: 72 swb GMC leaf spring rear 2wd all or part randy yes i need brackets too.

05-23-2008, 02:34 AM	#18
buffle buffle Join Date: Sep 2004 Location: Independence, Mo Posts: 426	Re: 72 swb GMC leaf spring rear 2wd all or part Randy u let me know when u are ready. I`ve waited this long, not in a hurry now.

05-23-2008, 03:04 AM	#19
deputyd_0803 Registered User Join Date: Apr 2008 Location: St. George, UT Posts: 77	Re: 72 swb GMC leaf spring rear 2wd all or part I will take the shifter. Just let me know when you are ready for payment... __________________ The ONLY way to go. 1972 C20 Custom Deluxe: Rebuilt 402 hopped up a bit, th400 with shift kit, Dana 60(wanna have posi), New solid, no cancer, cab. B & M Starshifter floor shifter.

05-23-2008, 03:35 AM	#20
Goin4aPutt Registered User Join Date: Mar 2008 Location: Lincolnton, NC Posts: 38	Re: 72 swb GMC leaf spring rear 2wd all or part Randy, I'm still interested in the door panels w/ arm rests, visors & 3 person seat belts. Whenever you have a chance, please let me know what condition everything is in. No hurry. Have a great weekend! __________________ Mike MSgt USAF (Ret) '72 Custom/20 '77 H-D Ironhead Sportster (wife's) '82 H-D FXB Sturgis '05 Trailblazer LT (wife's)

05-23-2008, 03:42 AM	#21
rawraw67 Registered User Join Date: Dec 2007 Location: Bay the Bay Posts: 483	Re: 72 swb GMC leaf spring rear 2wd all or part will you sell the valve covers,can I get a better picture ?

05-23-2008, 05:23 AM	#22
88JRFAN LET'S GO RACIN' Join Date: Oct 2007 Location: SALINA,KS Posts: 1,212	Re: 72 swb GMC leaf spring rear 2wd all or part Hey there Randy, if's it's good I will take it. Next week will be fine, in no hurry. 67401.Thanks Daren __________________ Daren 04 Chevy Extend cab 2500HD 6.0 Liter 4x4 71 CHEVY 3/4 4X4 402 BB, th400/np205, dana44/eaton ho52 w/4:10-TOY Rip El Jay RIP BOBBO'S MOM Last edited by 88JRFAN; 05-23-2008 at 05:24 AM.

05-23-2008, 06:02 AM	#23
kingsolver72 10/30/19 Join Date: Aug 2004 Location: ottawa kansas Posts: 5,245	Re: 72 swb GMC leaf spring rear 2wd all or part Kansas title?How much for frame and title? __________________ Fight the good fight, finish the race, keep the faith

05-23-2008, 06:24 AM	#24
ksjh1316 Account Suspended Join Date: Jul 2007 Location: Wichita KS Posts: 1,599	Re: 72 swb GMC leaf spring rear 2wd all or part Randy PM sent. Was this one long or short water pump Last edited by ksjh1316; 05-23-2008 at 06:26 AM.

05-23-2008, 09:39 AM	#25
71HUGGER396 Confirmed Truckaholic Join Date: Oct 2000 Location: Sarver,PA 16055 Posts: 732	Re: 72 swb GMC leaf spring rear 2wd all or part O.K.,I WILL TAKE THE POWER STEERING STUFF.My zip is 16055. Let me know what shipping is, and how you want paid, Thank you. __________________ 1968 50th STEP SIDE SHORTY, 350/350, a/c, ps, p,b Daily Driver, 1970 Cst short fleet, all black, 350/350, 1970 2wd Blazer, 2wd, 6 cyl. 3 spd, original, now a 454, 350turbo, 3.73 posi, on the road 1971 2wd fleet shorty, 454, 700r4, 3.73 posi, SOLD to 67OLDSTYLE72 "My rig's a little old but that don't mean she's slow" - SAWYER BROWN's Six Days On The Road SEMPER FI "I use to be a lean mean fighting machine, but now I'm a huffin, puffin, over stuffin love muffin"

Register or Log In To remove these advertisements.