FOUND...fiberglass parts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

bigjimzlll · 05-31-2008, 12:47 AM

Found a website that has every part for our trucks...even fenders and bedsides
I heard the quality was good.
All parts that start with the letter 'G" are fiberglass
http://www.showcars-bodyparts.com/chevgmc2.html

LUV2XCLR8 · 05-31-2008, 03:08 AM

Man they have some

stuff, pricey too

Super73 · 05-31-2008, 06:51 AM

Cheaper than US Body. Jim, I don't like you any more.. You going to make me open my wallet sooner than expected for a glass front end..

PA-IndianRider · 06-01-2008, 04:28 AM

Quote:

Originally Posted by Super73

Cheaper than US Body...

...... Plus US Body works has NO customer service.... does not service its products after inital sale. I wanted to get "tilt kit" parts for my one piece fiberglass frontend (made by them) .... I was told they were only available with new purchases of complete frontend kits and not for sale as individual replacement parts.... this is where US BODY WORKS belongs....

I did notice that http://www.showcars-bodyparts.com/chevgmc2.html does have the "tilt front end kit" I am looking for.... BIG THANKS BIG JIM..... ....... NO THANKS US BODYWORKS : > (

Hey "73" I slide the front end on & off my C10 "by myself" ..... can you imagine how your frontend would stay even higher in the air than it does NOW going down the 1/4 mile????

BTW...just got done packing ....leaving tomorrow morning for the Gasser Reunion at Thompson Raceway ..... http://www.gassermagazine.com/events.html ....... been waiting ALL WINTER for this weekend.... it should be AWESOME !!!!!

djracer · 06-01-2008, 06:36 AM

Take lots of pics!

PA-IndianRider · 06-03-2008, 06:53 AM

Quote:

Originally Posted by djracer

Take lots of pics!

Here are a FEW pictures from the GASSER REUNION for now.... Great day for nostaglia racing.... that's me with "Ohio" George Montgomery... one of drag racing's greatest....

djracer · 06-03-2008, 08:19 AM

Sweet!

1968SWBBigBlock · 06-03-2008, 02:22 PM

PA-Indian - Ohio George still runs his speed shop in Dayton.
I happened to be flipping thru my GPS and ran into the shop address.
I was only like a mile away so I ran over and spent about 2 hours with George and his son.
I even have the poster shown in the picture in my office.
George still does alot of work on the old ford motors, 427, 428 & 429's.
They even have a Buick motor in the shop from the Indy lights days. At one time they made every motor for indy lights.
Walking history is what he is. Same shop that he has worked out of for decades - proclaims it is the oldest continuously run speed shop in the nation.
Tons of trophy's from over the years in the shop as well.
They have so many old parts it makes you sick, they had just dug out a hurst wheels metal shipping drum to sell on ebay when I was in. Hurst used to send out all their wheels in these drums about the size of a 30 gallon grease drum with the white black and gold hurst logos on the side.

PA-IndianRider · 06-03-2008, 04:00 PM

[QUOTE= PA-Indian - Ohio George still runs his speed shop in Dayton.
I happened to be flipping thru my GPS and ran into the shop address.
I was only like a mile away so I ran over and spent about 2 hours with George and his son.
QUOTE]

'68 BigBlock... yes ...George is a VERY likeable LEGEND of drag racing. Truly the high pont of the weekend. We talked & talked. Plus I had just purchased a video of the 1958 Nationals off of eBay and told George how he was shown making a pass .... then he told me the whole story.

Being we are not far from Dayton, OHIO (Pittsburgh) George said to stop by his shop sometime.... Can't wait to do that

This must be my year... Don Gartlis is coming to our local drag strip later this Summer. Now if I can just meet LINDA VAUGHAN & Shirley Muldowney....

MORE Pics from the Gasser reunion....

kwhite4 · 06-04-2008, 06:20 PM

Anyone talk with these folks about the parts?
I emailed them a couple months back and never got a response.

Super73 · 06-05-2008, 12:05 AM

I called and spoke to Rob yesterday. Didn't order anything just yet though.. Just bought a trailor andselling a bunch of stuff first.

**regan wilson** · 06-16-2008, 06:59 PM

Aww come on guys ! Keep it real and keep it steel ! I'm gonna catch crap on this ....lol

djracer · 06-16-2008, 07:49 PM

If we had you motor we would! Reagan You don't know where I can find a deal on a short deck block that will go 4.560. I would buy aluminum or steel. I just want a deal.

PA-IndianRider · 06-16-2008, 08:25 PM

[QUOTE=djracer;2768081]If we had you motor we would!..... [QUOTE]

I was THINKING the same thing.....

05-31-2008, 12:47 AM	#1
bigjimzlll Senior Member Join Date: Dec 2001 Location: Redding,CA...USA Posts: 4,736	FOUND...fiberglass parts Found a website that has every part for our trucks...even fenders and bedsides I heard the quality was good. All parts that start with the letter 'G" are fiberglass http://www.showcars-bodyparts.com/chevgmc2.html __________________ It's called "drag racing" if they called it "tic..tic..WHAM!..BANG! F&K!!!", they'd have to keep the magazines under the counter with the other men's publications click the clicky to join the site.... http://67-72chevytrucks.com/vboard/payments.php 67 lwb..first hotrod in 25 years..540 best ET is 9.45 @ 141.44 Anderson,CA Last edited by bigjimzlll; 05-31-2008 at 12:47 AM.*

05-31-2008, 03:08 AM	#2
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,470	Re: FOUND...fiberglass parts Man they have some stuff, pricey too __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Big Piggy: "Goliath" 07 Kodiak C4500 Lil Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

05-31-2008, 06:51 AM	#3
Super73 Registered User Join Date: Nov 2007 Location: Bay Area, Ca Posts: 2,841	Re: FOUND...fiberglass parts Cheaper than US Body. Jim, I don't like you any more.. You going to make me open my wallet sooner than expected for a glass front end.. __________________ ------Motor---------------Bottle 60'---1.53---------------1.41 1/8---6.58 @ 105.92----5.87 @ 118.41 1/4---10.38 @ 126.97----9.24 @ 142.49

06-01-2008, 06:36 AM	#5
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,891	Re: FOUND...fiberglass parts Take lots of pics! __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

06-03-2008, 08:19 AM	#7
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,891	Re: FOUND...fiberglass parts Sweet! __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

06-03-2008, 02:22 PM	#8
1968SWBBigBlock Active Member Join Date: Oct 2006 Location: Ohio Posts: 1,643	Re: FOUND...fiberglass parts PA-Indian - Ohio George still runs his speed shop in Dayton. I happened to be flipping thru my GPS and ran into the shop address. I was only like a mile away so I ran over and spent about 2 hours with George and his son. I even have the poster shown in the picture in my office. George still does alot of work on the old ford motors, 427, 428 & 429's. They even have a Buick motor in the shop from the Indy lights days. At one time they made every motor for indy lights. Walking history is what he is. Same shop that he has worked out of for decades - proclaims it is the oldest continuously run speed shop in the nation. Tons of trophy's from over the years in the shop as well. They have so many old parts it makes you sick, they had just dug out a hurst wheels metal shipping drum to sell on ebay when I was in. Hurst used to send out all their wheels in these drums about the size of a 30 gallon grease drum with the white black and gold hurst logos on the side. __________________ 1968 SWB 454 + .040, 490HP x 540 FT pounds of Torque 10-1 Kb Forged pistons, recon rods w/ ARP wave loc bolts 781 heads Ported with 2.19/1.88 SSTvalves Lunati 60204 cam, Micro Trol lifters, Ported Edelbrock Performer Rpm manifold armor coated, Pertronix Triple Strike Ignition Holley 770 Street Avenger carb,Headers armor coated Built by Watson Ruppel Performance in Sarahsville Ohio. Hardshift Tranny Built Turbo 350,TSI 10" 3000 stall 12 Bolt Eaton Posi 4.10 Richmond Gears moser axles 18.5" x 31" Hoosier Pro Street Radials ET Classic 5 Wheels - polished Power Steering, Power Brakes,Disc Brakes,Tach & Gauge Dash, Tilt,Factory Air (gone) Custom Paint & Body Work Special thanks to my wife, my son and my money tree

06-03-2008, 04:00 PM	#9
PA-IndianRider Registered User Join Date: Jul 2007 Location: Pittsburgh, PA Posts: 294	Re: FOUND...fiberglass parts [QUOTE= PA-Indian - Ohio George still runs his speed shop in Dayton. I happened to be flipping thru my GPS and ran into the shop address. I was only like a mile away so I ran over and spent about 2 hours with George and his son. QUOTE] '68 BigBlock... yes ...George is a VERY likeable LEGEND of drag racing. Truly the high pont of the weekend. We talked & talked. Plus I had just purchased a video of the 1958 Nationals off of eBay and told George how he was shown making a pass .... then he told me the whole story. Being we are not far from Dayton, OHIO (Pittsburgh) George said to stop by his shop sometime.... Can't wait to do that This must be my year... Don Gartlis is coming to our local drag strip later this Summer. Now if I can just meet LINDA VAUGHAN & Shirley Muldowney.... MORE Pics from the Gasser reunion.... Attached Images __________________ John aka "Milner" PA-IndianRider - Pittsburgh, PA 70 Chevy C10 Stepside "Gasser/Altered Drag Race Hot Rod" *Where were You in '62 ?* Last edited by PA-IndianRider; 06-03-2008 at 04:04 PM.

06-04-2008, 06:20 PM	#10
kwhite4 Junior Member Join Date: Oct 2004 Location: Gatesville texas Posts: 180	Re: FOUND...fiberglass parts Anyone talk with these folks about the parts? I emailed them a couple months back and never got a response. __________________ 68 GMC 565 BBC Abruzzi super pro glide 9.85@135.00

06-05-2008, 12:05 AM	#11
Super73 Registered User Join Date: Nov 2007 Location: Bay Area, Ca Posts: 2,841	Re: FOUND...fiberglass parts I called and spoke to Rob yesterday. Didn't order anything just yet though.. Just bought a trailor andselling a bunch of stuff first. __________________ ------Motor---------------Bottle 60'---1.53---------------1.41 1/8---6.58 @ 105.92----5.87 @ 118.41 1/4---10.38 @ 126.97----9.24 @ 142.49

06-16-2008, 06:59 PM	#12
regan wilson Senior Member Join Date: Mar 2008 Location: tyler texas Posts: 1,532	Re: FOUND...fiberglass parts Aww come on guys ! Keep it real and keep it steel ! I'm gonna catch crap on this ....lol __________________ NHRA Super Street 469C It only runs 10.90 at 156 mph

06-16-2008, 07:49 PM	#13
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,891	Re: FOUND...fiberglass parts If we had you motor we would! Reagan You don't know where I can find a deal on a short deck block that will go 4.560. I would buy aluminum or steel. I just want a deal. __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

06-16-2008, 08:25 PM	#14
PA-IndianRider Registered User Join Date: Jul 2007 Location: Pittsburgh, PA Posts: 294	Re: FOUND...fiberglass parts [QUOTE=djracer;2768081]If we had you motor we would!..... [QUOTE] I was THINKING the same thing..... __________________ John aka "Milner" PA-IndianRider - Pittsburgh, PA 70 Chevy C10 Stepside "Gasser/Altered Drag Race Hot Rod" *Where were You in '62 ?*



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.