What did you get done? 06/08 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**N2TRUX** · 06-08-2008, 04:50 PM

I know this is a bit early, but I am on the road and have to post it while I ca.

I spent the weekened so far relaxing and enjoying myself on a "Fiesta en San Antonio" celebrating my daughters 16th birthday. My family and friends were joined by n2billets family for a weekend of fun

So far my quick and costly adventure has taken me to see exotic plants, animals, and marine life (Sea World) I will enjoy a full day of gravity defying, equilibrium upsetting, g force testing at Six Flags Fiesta Texas.

Don't be to sympathetic of my plight, I will be relaxing (recovering) at the La Cantera Resort and enjoying the finest Tex-Mex food while dining on the river boat of Casa Rio.

What did you get done?

La Cantera-

Casa Rio-

87Lowrider · 06-08-2008, 05:10 PM

... the nerve of some people!

- I'm still working, I'll post when I'm done!

Update: 2130 hrs - Glad you had a good time.

I cut 1 coil off my stock springs to bring the truck down to a respectable level after swapping the really short ones for stock ones last week. Now she's sitting better and doesn't look like she'll drag or rub the fender wells.. I got the front suspension put together and added new brakes. I'm hoping to get new exhaust installed this week and get her ready for a cruise-in next weekend.

I'll post a video of the 454 next weekend.

Ken

S10Fan · 06-08-2008, 06:07 PM

Finally replaced the "Din" sized radio with a shaft style from Ken Harrison Inc. Made a mounting plate from aluminum and set her in place. The knobs are much easier to use for this clumsy old goat.

vern350 · 06-08-2008, 06:54 PM

Went to a huge parts swap with around a couple hundred vendors. Camped the weekend at the parts swap. Found a aluminum tailgate band for my 81 shortbox. A vendor had a gmc one, still new in the package, but needed something cheaper and with chevrolet on it. Got my new edelbrock intake and carb and goodies bolted on the 81. Also received package from classic parts......

with some new window seals and turn signals for the bumper to replace the faded and cracked ones. Also got some new gm rear inner bumper brackets for my rear smooth bumper.

N2TRUX, that resort looks alot better than the camping conditions I had to put up with it. Windy, humid, raining, and hot.

BaddBusa2005 · 06-08-2008, 06:56 PM

got stranded on the lake due to a POS battery. Orderd a new optima blue top.

Brake lines ran on my 94 ta and torque arm installed.

79GMC_OLDS · 06-08-2008, 08:07 PM

Quote:

Originally Posted by vern350

Went to a huge parts swap with around a couple hundred vendors. Camped the weekend at the parts swap. Found a aluminum tailgate band for my 81 shortbox. A vendor had a gmc one, still new in the package, but needed something cheaper and with chevrolet on it. Got my new edelbrock intake and carb and goodies bolted on the 81. Also received package from classic parts......

with some new window seals and turn signals for the bumper to replace the faded and cracked ones. Also got some new gm rear inner bumper brackets for my rear smooth bumper.

N2TRUX, that resort looks alot better than the camping conditions I had to put up with it. Windy, humid, raining, and hot.

i assume you were at the barrie flea market? i wish i could of made it..always lots of good deals...hopefully i'll make the fall one

smashingchuck · 06-08-2008, 08:32 PM

Spent most of Saturday on the road to go look at a bagged s10 for a daily driver. It's amazing what some people will tell you over the phone. Need less to say, I went with cash in hand ready to buy it, and when I finally saw it in person I turned right back around. I didn't even say a word to the guy, I just left.

Today was more productive. I got all the acessoried mounted on my motor. Everything lines up, and I have two of the tree belts installed. Just have to clean up the power steering and the York, and I'm done.

vern350 · 06-08-2008, 08:40 PM

79GMC_OLDS, thats correct. I was at the barrie flea market. Heres the link.

http://www.burlscreek.com/content.xjp?id=48

**old Rusty C10** · 06-08-2008, 08:41 PM

I didint get a dern thing truck related done.. in fact i havent even gone near the truck in like a week. Its hot as all get out here this week and im trying to stay alive working outdoors in it... Saturday my wife and i went to Atlantic City and stayed overnight.. We didnt win but we didnt play much. A friend gave me concert tickets so we went to see Clint Black who put on a great show.. and we were in like the 22nd row so we had great seats
the wife who doesnt like country music enjoyed herself and clint took a turn playing drums during the encore as one of his guitarist/ backup singers sang the old steeley dan song "when josie comes home"
clint did an old willie nelson tune and sang all his hits pretty much..so it was a nice night

SCOTI · 06-08-2008, 08:48 PM

I did some stuff for the LSx swap into the 68.

I trimmed the motor mount adapters to set the 6.0 in the sbc location. This has been a trial & error deal since I'm trying to use the original Dropmember sbc 'tabs' vs. cutting them off & relocating them. I yanked the truck intake off to offer a better angle when trying to stab the drivetrain in the engine compartment. I also had to use a hoist 'carb' plate w/the holes tweaked that's now bolted to the engine valley toward the rear of the block. This should keep the hoist chains off the firewall (they beat it up pretty good on my 1st attempt).

I spent part of the week trying to find someone parting out an LS1 so I could get an oil pan. I wasn't having much luck so I bit the bullet & got some stuff on the way from my local GM parts source so I can move forward.

I also gutted the factory heater & stuff so I'm committing myself to aftermarket hvac . . .....

**lolife99** · 06-08-2008, 08:58 PM

Got a late start today,... but I got a start on my rear dropmember for the '86 beater/shop truck. Got the frame notches, both tube crossmembers, and front 4-link brackets installed. I know it doesn't look like much,... but there are several hours here. Tomorrow night the rear end goes under it. The humidity is killing my bare metal parts. Quick mock up then dis-assembly to bead blast and powdercoat.

Grande Rojo · 06-08-2008, 09:46 PM

Sat. I went to the Steak n Shake Car show/ Cruise in

Sun. I went to the Power Tour here in Springfield. It was fn' great. I took my truck and got the one day pass. I would love to do the whole Power Tour!

hot trux · 06-08-2008, 10:08 PM

lo-life, myself, and another buddy went to Goodguys Indy and it RAINED on Sat again!!! (20% chance they said thurs.) 10 plus inches by sat at noon! Vendor numbers were way down as # of entrys. Sold my Hilborn Inj. at swap meet Fri. so it wasn't a toal wash out. A buddy and his family from NOLA met up with us and a good time was had by all. Wired on the project some today.

AceX · 06-08-2008, 10:34 PM

Just got back a little bit ago from American Graffiti in Modesto. Showed off with ARC Audio and spent some time with Chip Foose.

Pics to come.

Fraser Beatty · 06-08-2008, 10:42 PM

Rotated the tires on my 83 and messed around with the wiring some more. I still haven't fixed the problem with my rear left turn signal, despite replacing everything I can think of and getting rid of all the trailer wiring.

Crush · 06-08-2008, 11:51 PM

Took Friday off and went and snatched the K5 out of storage where it's sat untouched for nearly 2 months...decided to finally swap the wheels from the '79 project over to the blazer...why did I wait soooo long?1?!?!?!?!

Gonna have to remove the inner fenders...then may cut the front springs another inch to give it the rake I want....or maybe just bag it...

anyways...went to a small local show on Sat...and hung out with car guys for the first time in a LOOOONG time this weekend...had a blast...whatcha think?

68GMC454 · 06-09-2008, 12:58 AM

well i traded off my 1971 condor II motor home i got last year for 50.00 for a 1997 nissan altima.. needs minor repairs, i think a lifter or 2 may be bad,, so i come out ahead in a deal... have a great week ya'll
billy

68GMC454 · 06-09-2008, 01:00 AM

crush that blazer looks great...

SBTork · 06-09-2008, 02:25 AM

Quote:

Originally Posted by 68GMC454

crush that blazer looks great...

x2 here

I, once again, wound up drinking quite a few beers. I also celebrated a friends fathers 60th birthday, worked all day Saturday and was pissed all day sunday 'cuz it would not stop raining. Im going to order some new door hinges for my driver side door so it'll actually shut without slamming it. That'll be a next weekend project.

dammitmitchell · 06-09-2008, 09:27 AM

i dropped both gastanks in my 83 to do floats, removed old brakelines that wree left attached and rubbing my new ones (i diddnt do it) found another few strands of random wires that go to nothing and are not original, his from my children.
dropped my oilpan and redid the seal
made fun of my brother iin-law for drivign a v6 f150 and talking crap to me about mudding....
just smiled and imagined parking on top of his truck with mine =-)
ohh i had to install single foothold steps so my wife could get in teh truck, i dont like them but they are mounted strong with welded brackets =-)

454HO · 06-09-2008, 10:24 AM

Howdy from Beijing!

Friday we went to Tianamen Square, Saturday was the Forbidden City to see the Emporer's Palace, Sunday we did some shopping and today we went to The Great Wall. Nothing truck related unless you count breathing endless exhaust fumes....

babyJay · 06-09-2008, 11:19 AM

Cleaned and organized the garage in 90+ degree heat and high humidity...

**oldwagon** · 06-09-2008, 11:31 AM

My brother-in-law and I had to mow and trim a yard yesterday, and we were glad we did, because we had more rain last nite. It just don't get no better than this!

Hope u gize were able to do something more constructive.

Slonaker · 06-09-2008, 01:34 PM

Hey! I was in San Antonio too! Oh, wait. I live here...

The onlything I did with the truck this weekend was to use it to tow the boat to the lake for a few hours. At $50 to fill up one of two tanks, I can't afford to do anything lese with it.

Slonaker

los-lowrider · 06-09-2008, 02:17 PM

Stayed at a Hot Rod Meeting!

06-08-2008, 04:50 PM	#1
N2TRUX Happy to be here Join Date: Mar 2000 Location: Cypress, TX Posts: 39,021	What did you get done? 06/08 I know this is a bit early, but I am on the road and have to post it while I ca. I spent the weekened so far relaxing and enjoying myself on a "Fiesta en San Antonio" celebrating my daughters 16th birthday. My family and friends were joined by n2billets family for a weekend of fun So far my quick and costly adventure has taken me to see exotic plants, animals, and marine life (Sea World) I will enjoy a full day of gravity defying, equilibrium upsetting, g force testing at Six Flags Fiesta Texas. Don't be to sympathetic of my plight, I will be relaxing (recovering) at the La Cantera Resort and enjoying the finest Tex-Mex food while dining on the river boat of Casa Rio. What did you get done? La Cantera- Casa Rio- __________________ Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra"

06-08-2008, 05:10 PM	#2
87Lowrider Navy Radioman Veteran Join Date: Jul 2007 Location: Western Kentucky Posts: 1,356	Re: What did you get done? 06/08 ... the nerve of some people! - I'm still working, I'll post when I'm done! Update: 2130 hrs - Glad you had a good time. I cut 1 coil off my stock springs to bring the truck down to a respectable level after swapping the really short ones for stock ones last week. Now she's sitting better and doesn't look like she'll drag or rub the fender wells.. I got the front suspension put together and added new brakes. I'm hoping to get new exhaust installed this week and get her ready for a cruise-in next weekend. I'll post a video of the 454 next weekend. Ken __________________ 1987 Chevrolet R10 Silverado BBC Build thread - SOLD 1986 GMC Sierra Classic - SOLD 1957 Chevy Step Side Daily Driver; 2005 Chevrolet Silverado 4x4 Z71 Stepside - SOLD 2005 Chevrolet Tahoe Z71 Last edited by 87Lowrider; 06-08-2008 at 10:37 PM.

06-08-2008, 06:07 PM	#3
S10Fan Old Heap Driver Join Date: Mar 2008 Location: Newport News, Va Posts: 2,642	Re: What did you get done? 06/08 Finally replaced the "Din" sized radio with a shaft style from Ken Harrison Inc. Made a mounting plate from aluminum and set her in place. The knobs are much easier to use for this clumsy old goat. Attached Images __________________ _____________________________ Bryan '99 Silverado 1500, 4.3, 5-speed, reg cab, short bed '50 Chevy 2DR Hard Top, 350/350, M2 Front End, 3:08 gear, cruiser. '40 F**d Sedan, all Chevy power, Heidt's front end, TCI rear, nice driver.

06-08-2008, 06:54 PM	#4
vern350 like a rock Join Date: Nov 2004 Location: Ontario, Canada Posts: 517	Re: What did you get done? 06/08 Went to a huge parts swap with around a couple hundred vendors. Camped the weekend at the parts swap. Found a aluminum tailgate band for my 81 shortbox. A vendor had a gmc one, still new in the package, but needed something cheaper and with chevrolet on it. Got my new edelbrock intake and carb and goodies bolted on the 81. Also received package from classic parts...... with some new window seals and turn signals for the bumper to replace the faded and cracked ones. Also got some new gm rear inner bumper brackets for my rear smooth bumper. N2TRUX, that resort looks alot better than the camping conditions I had to put up with it. Windy, humid, raining, and hot. Last edited by vern350; 06-08-2008 at 06:55 PM.

06-08-2008, 06:56 PM	#5
BaddBusa2005 Registered User Join Date: Feb 2006 Location: Cleveland, TN Posts: 440	Re: What did you get done? 06/08 got stranded on the lake due to a POS battery. Orderd a new optima blue top. Brake lines ran on my 94 ta and torque arm installed. __________________ 1981 Custom Deeluxe SWB 5.3/4L60e 3.73 and Auburn. Mustang Dyno 265hp/258tq

06-08-2008, 08:32 PM	#7
smashingchuck It'd be alot cooler if you did Join Date: May 2003 Location: Three Rivers, MI Posts: 2,345	Re: What did you get done? 06/08 Spent most of Saturday on the road to go look at a bagged s10 for a daily driver. It's amazing what some people will tell you over the phone. Need less to say, I went with cash in hand ready to buy it, and when I finally saw it in person I turned right back around. I didn't even say a word to the guy, I just left. Today was more productive. I got all the acessoried mounted on my motor. Everything lines up, and I have two of the tree belts installed. Just have to clean up the power steering and the York, and I'm done. __________________ 78 Build Thread 4Runner Build

06-08-2008, 08:40 PM	#8
vern350 like a rock Join Date: Nov 2004 Location: Ontario, Canada Posts: 517	Re: What did you get done? 06/08 79GMC_OLDS, thats correct. I was at the barrie flea market. Heres the link. http://www.burlscreek.com/content.xjp?id=48 Last edited by vern350; 06-08-2008 at 08:41 PM.

06-08-2008, 08:41 PM	#9
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,310	Re: What did you get done? 06/08 I didint get a dern thing truck related done.. in fact i havent even gone near the truck in like a week. Its hot as all get out here this week and im trying to stay alive working outdoors in it... Saturday my wife and i went to Atlantic City and stayed overnight.. We didnt win but we didnt play much. A friend gave me concert tickets so we went to see Clint Black who put on a great show.. and we were in like the 22nd row so we had great seats the wife who doesnt like country music enjoyed herself and clint took a turn playing drums during the encore as one of his guitarist/ backup singers sang the old steeley dan song "when josie comes home" clint did an old willie nelson tune and sang all his hits pretty much..so it was a nice night __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!

06-08-2008, 08:48 PM	#10
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 22,064	Re: What did you get done? 06/08 I did some stuff for the LSx swap into the 68. I trimmed the motor mount adapters to set the 6.0 in the sbc location. This has been a trial & error deal since I'm trying to use the original Dropmember sbc 'tabs' vs. cutting them off & relocating them. I yanked the truck intake off to offer a better angle when trying to stab the drivetrain in the engine compartment. I also had to use a hoist 'carb' plate w/the holes tweaked that's now bolted to the engine valley toward the rear of the block. This should keep the hoist chains off the firewall (they beat it up pretty good on my 1st attempt). I spent part of the week trying to find someone parting out an LS1 so I could get an oil pan. I wasn't having much luck so I bit the bullet & got some stuff on the way from my local GM parts source so I can move forward. I also gutted the factory heater & stuff so I'm committing myself to aftermarket hvac . . ..... __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

06-08-2008, 08:58 PM	#11
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,700	Re: What did you get done? 06/08 Got a late start today,... but I got a start on my rear dropmember for the '86 beater/shop truck. Got the frame notches, both tube crossmembers, and front 4-link brackets installed. I know it doesn't look like much,... but there are several hours here. Tomorrow night the rear end goes under it. The humidity is killing my bare metal parts. Quick mock up then dis-assembly to bead blast and powdercoat. Attached Images __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823 Last edited by lolife99; 06-08-2008 at 11:06 PM.

06-08-2008, 09:46 PM	#12
Grande Rojo paper or plastic? Join Date: Nov 2002 Location: SW Missouri Posts: 671	Re: What did you get done? 06/08 Sat. I went to the Steak n Shake Car show/ Cruise in Sun. I went to the Power Tour here in Springfield. It was fn' great. I took my truck and got the one day pass. I would love to do the whole Power Tour! __________________ 1967 Chevy SWB 250 http://67-72chevytrucks.com/vboard/s...d.php?t=442157 1977 Chevy SWB 454 No More 454 getting 5.3 http://67-72chevytrucks.com/vboard/s...d.php?t=310518 1977 Stepside Truck of the month winner http://67-72chevytrucks.com/vboard/s...d.php?t=135524 1965 Chevy C10 454 http://67-72chevytrucks.com/vboard/s...d.php?t=731372 1975 Dodge Power Wagon http://67-72chevytrucks.com/vboard/s...=1#post7871388

06-08-2008, 10:08 PM	#13
hot trux '85 Stepside Join Date: Jan 2006 Location: montgomery city mo. Posts: 360	Re: What did you get done? 06/08 lo-life, myself, and another buddy went to Goodguys Indy and it RAINED on Sat again!!! (20% chance they said thurs.) 10 plus inches by sat at noon! Vendor numbers were way down as # of entrys. Sold my Hilborn Inj. at swap meet Fri. so it wasn't a toal wash out. A buddy and his family from NOLA met up with us and a good time was had by all. Wired on the project some today.

06-08-2008, 10:34 PM	#14
AceX >130dB Moderator Join Date: Aug 2006 Location: Sacramento, CA Posts: 2,130	Re: What did you get done? 06/08 Just got back a little bit ago from American Graffiti in Modesto. Showed off with ARC Audio and spent some time with Chip Foose. Pics to come. __________________ Living Life @ 130dB LED Tail Light Conversion; How-to Friend. Father. Brother. RIP El Jay ------------------------------------------------------------------------------------------------------------------------- CLICK HERE and for less than $0.07 a day, you too can help support and build a better forum.

06-08-2008, 10:42 PM	#15
Fraser Beatty Registered User Join Date: Sep 2007 Location: Sarnia, Ontario Posts: 571	Re: What did you get done? 06/08 Rotated the tires on my 83 and messed around with the wiring some more. I still haven't fixed the problem with my rear left turn signal, despite replacing everything I can think of and getting rid of all the trailer wiring. __________________ 1961 GMC 930- SOLD 1979 GMC C35 Single Wheel Camper Special- SOLD 1980 GMC C25 Camper Special- SOLD 1983 Chevrolet C10- SOLD 1983 Chevrolet Camaro- SOLD 1985 GMC C1500 (Dad's truck) 1985 GMC C3500 Crew Cab Dually- TRADED FOR 61 GMC 1997 Dodge Ram 1500 V6 Shortbox- Daily Driver

06-08-2008, 11:51 PM	#16
Crush Active Member Join Date: Nov 2003 Location: Jacksonville, FL Posts: 307	Re: What did you get done? 06/08 Took Friday off and went and snatched the K5 out of storage where it's sat untouched for nearly 2 months...decided to finally swap the wheels from the '79 project over to the blazer...why did I wait soooo long?1?!?!?!?! Gonna have to remove the inner fenders...then may cut the front springs another inch to give it the rake I want....or maybe just bag it... anyways...went to a small local show on Sat...and hung out with car guys for the first time in a LOOOONG time this weekend...had a blast...whatcha think? Attached Images __________________ D.M.C -FF- Last edited by Crush; 06-09-2008 at 12:02 AM.



Register or Log In To remove these advertisements.

06-09-2008, 12:58 AM	#17
68GMC454 THE VILLIAGE IDIOT Join Date: Nov 2006 Location: Tooele, Utah Posts: 1,405	Re: What did you get done? 06/08 well i traded off my 1971 condor II motor home i got last year for 50.00 for a 1997 nissan altima.. needs minor repairs, i think a lifter or 2 may be bad,, so i come out ahead in a deal... have a great week ya'll billy __________________ honestly honey,,i have no idea how that truck got here.

06-09-2008, 01:00 AM	#18
68GMC454 THE VILLIAGE IDIOT Join Date: Nov 2006 Location: Tooele, Utah Posts: 1,405	Re: What did you get done? 06/08 crush that blazer looks great... __________________ honestly honey,,i have no idea how that truck got here.

06-09-2008, 09:27 AM	#20
dammitmitchell the pollock Join Date: May 2008 Location: abilene, texas Posts: 4,423	Re: What did you get done? 06/08 i dropped both gastanks in my 83 to do floats, removed old brakelines that wree left attached and rubbing my new ones (i diddnt do it) found another few strands of random wires that go to nothing and are not original, his from my children. dropped my oilpan and redid the seal made fun of my brother iin-law for drivign a v6 f150 and talking crap to me about mudding.... just smiled and imagined parking on top of his truck with mine =-) ohh i had to install single foothold steps so my wife could get in teh truck, i dont like them but they are mounted strong with welded brackets =-) __________________ Jack of ALL trades, Master of none.. (but one... procrastination) Army vet 02-08 RIP El Jay! Miss you brother! http://67-72chevytrucks.com/vboard/s...d.php?t=343538 http://67-72chevytrucks.com/vboard/s...d.php?t=386042

06-09-2008, 10:24 AM	#21
454HO Registered User Join Date: Apr 2005 Location: Austin, TX Posts: 1,223	Re: What did you get done? 06/08 Howdy from Beijing! Friday we went to Tianamen Square, Saturday was the Forbidden City to see the Emporer's Palace, Sunday we did some shopping and today we went to The Great Wall. Nothing truck related unless you count breathing endless exhaust fumes.... __________________ - Greg

06-09-2008, 11:19 AM	#22
babyJay Arrived on a Pale Horse Join Date: Mar 2007 Location: SnagTown Indiana Posts: 2,524	Re: What did you get done? 06/08 Cleaned and organized the garage in 90+ degree heat and high humidity... __________________ Jason 87 V30 350TBI/400 White w/Boss V-plow 89 R3500 CC SRW

06-09-2008, 11:31 AM	#23
oldwagon Registered User Join Date: Feb 2003 Location: Mulvane, Ks. Posts: 756	Re: What did you get done? 06/08 My brother-in-law and I had to mow and trim a yard yesterday, and we were glad we did, because we had more rain last nite. It just don't get no better than this! Hope u gize were able to do something more constructive.

06-09-2008, 01:34 PM	#24
Slonaker Insert Witty Text Here Join Date: Oct 2002 Location: San Antonio, TX Posts: 3,415	Re: What did you get done? 06/08 Hey! I was in San Antonio too! Oh, wait. I live here... The onlything I did with the truck this weekend was to use it to tow the boat to the lake for a few hours. At $50 to fill up one of two tanks, I can't afford to do anything lese with it. Slonaker __________________ '86 Chevy C10 (Sold 04/19/13 ) Stock '01 Silverado

06-09-2008, 02:17 PM	#25
los-lowrider Registered User Join Date: Feb 2005 Location: Germany, Krefeld Posts: 180	Re: What did you get done? 06/08 Stayed at a Hot Rod Meeting! __________________ Best Regards from Germany! *www.los-lowrider.com*

Register or Log In To remove these advertisements.