4 - 15 by 8 polished alum. center lines f/s - The 1947 - Present Chevrolet & GMC Truck Message Board Network

billsbowtie · 06-09-2008, 10:05 PM

they clean up good they are 5 lug but have 10 bolt holes big chevy pat. like our trucks and big ford truck pat. these are good driver shape with almost new tires i would say at least 3/4 tread left on them $350.00 frim .no shipping on these.
PRICE LOWERD TO $300.00

billsbowtie · 06-09-2008, 10:05 PM

49m · 06-09-2008, 10:23 PM

are they 5x5

billsbowtie · 06-09-2008, 10:39 PM

they are the same pattern as the 71/72 trucks i had them on my 97 gmc 5 lug truck and took a set of 5 lug ralleys off of a 71/72 truck and put back on the 97 when i took these off.

49m · 06-12-2008, 10:25 PM

Do you have any pics of them on the truck. How much tread is leaft and any dry rot in the tires

billsbowtie · 06-13-2008, 12:19 PM

tires have between 1/2 and 2/3 rd's of tread left. i don't have any pics. of them on a truck i deleted them when i sold the truck. did you see the black 97 gmc i had f/s on here about 4 months ago they were on it.
i can get them down and clean them up and getsome better pic.s if you are interested in them. but my price is frim because i don't think i could replace them for that. i will be putting them on my 68 when i change it to 5 lug if they don't sale.

49m · 06-13-2008, 07:29 PM

let me see some pics and will decide if they are for me or not.

billsbowtie · 06-13-2008, 10:36 PM

i will try to get some pic.s this week end.

billsbowtie · 06-14-2008, 02:00 PM

i put a little mothers polish on the one in the middle to give you and ideal of what they will look like cleaned up. 2 of them have a little scuffing around the edges i just noticed today but not bad.

billsbowtie · 06-14-2008, 02:01 PM

billsbowtie · 06-14-2008, 02:01 PM

49m · 06-15-2008, 07:55 PM

I will pass a dear ran Into the side of the camaro and I have to replace the fender, winshield,door, and pull a dent out of the rear quarter. No cash to get them

billsbowtie · 06-15-2008, 09:01 PM

Sorry To Hear That I No How That Goes Something Always Tries To Get The Toy Money.

billsbowtie · 06-23-2008, 03:04 AM

i have lowered the price to $350.00.

70c10 · 06-23-2008, 04:27 PM

Bill, this is what the same rims look like on my truck

http://drchop.smugmug.com/gallery/52...09_GSXka-X2-LB

billsbowtie · 06-24-2008, 01:11 AM

they look good on your truck. i don't think mine will clean up that nice but they look good enough for a daily driver.

billsbowtie · 07-10-2008, 08:11 PM

Price Lowered To $300.00.

70c10 · 07-11-2008, 08:59 AM

Bill, those will easily clean up like new with wheel polish

Summitracing sells those same rims for about $275 each

billsbowtie · 07-11-2008, 12:19 PM

i have cleaned them up a couple of times with mothers polish and they looked good.

06-09-2008, 10:05 PM	#1
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	4 - 15 by 8 polished alum. center lines f/s they clean up good they are 5 lug but have 10 bolt holes big chevy pat. like our trucks and big ford truck pat. these are good driver shape with almost new tires i would say at least 3/4 tread left on them $350.00 frim .no shipping on these. PRICE LOWERD TO $300.00 __________________ i have 67/72 chevy truck parts f/s. Last edited by billsbowtie; 07-10-2008 at 08:11 PM.

06-09-2008, 10:05 PM	#2
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: 4 - 15 by 8 polished alum. center lines f/s __________________ i have 67/72 chevy truck parts f/s.

06-09-2008, 10:23 PM	#3
49m Registered User Join Date: Aug 2007 Location: Turners Station,Ky Posts: 842	Re: 4 - 15 by 8 polished alum. center lines f/s are they 5x5 __________________ My Rides 1969 Mustang gt coupe 1971 Chevy Cheyenne 1986 Iroc camaro 1986 K10 Short Bed 1987 Iroc Camaro 1990 rs Camaro 1992 350 ss truck 1998 Honda Civic 2005 Ram 2500 Cummins My Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=279831

06-09-2008, 10:39 PM	#4
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: 4 - 15 by 8 polished alum. center lines f/s they are the same pattern as the 71/72 trucks i had them on my 97 gmc 5 lug truck and took a set of 5 lug ralleys off of a 71/72 truck and put back on the 97 when i took these off. __________________ i have 67/72 chevy truck parts f/s.

06-12-2008, 10:25 PM	#5
49m Registered User Join Date: Aug 2007 Location: Turners Station,Ky Posts: 842	Re: 4 - 15 by 8 polished alum. center lines f/s Do you have any pics of them on the truck. How much tread is leaft and any dry rot in the tires __________________ My Rides 1969 Mustang gt coupe 1971 Chevy Cheyenne 1986 Iroc camaro 1986 K10 Short Bed 1987 Iroc Camaro 1990 rs Camaro 1992 350 ss truck 1998 Honda Civic 2005 Ram 2500 Cummins My Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=279831

06-13-2008, 12:19 PM	#6
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: 4 - 15 by 8 polished alum. center lines f/s tires have between 1/2 and 2/3 rd's of tread left. i don't have any pics. of them on a truck i deleted them when i sold the truck. did you see the black 97 gmc i had f/s on here about 4 months ago they were on it. i can get them down and clean them up and getsome better pic.s if you are interested in them. but my price is frim because i don't think i could replace them for that. i will be putting them on my 68 when i change it to 5 lug if they don't sale. __________________ i have 67/72 chevy truck parts f/s.

06-13-2008, 07:29 PM	#7
49m Registered User Join Date: Aug 2007 Location: Turners Station,Ky Posts: 842	Re: 4 - 15 by 8 polished alum. center lines f/s let me see some pics and will decide if they are for me or not. __________________ My Rides 1969 Mustang gt coupe 1971 Chevy Cheyenne 1986 Iroc camaro 1986 K10 Short Bed 1987 Iroc Camaro 1990 rs Camaro 1992 350 ss truck 1998 Honda Civic 2005 Ram 2500 Cummins My Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=279831

06-13-2008, 10:36 PM	#8
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: 4 - 15 by 8 polished alum. center lines f/s i will try to get some pic.s this week end. __________________ i have 67/72 chevy truck parts f/s.

06-14-2008, 02:00 PM	#9
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: 4 - 15 by 8 polished alum. center lines f/s i put a little mothers polish on the one in the middle to give you and ideal of what they will look like cleaned up. 2 of them have a little scuffing around the edges i just noticed today but not bad. __________________ i have 67/72 chevy truck parts f/s.

06-14-2008, 02:01 PM	#10
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: 4 - 15 by 8 polished alum. center lines f/s __________________ i have 67/72 chevy truck parts f/s.

06-15-2008, 07:55 PM	#12
49m Registered User Join Date: Aug 2007 Location: Turners Station,Ky Posts: 842	Re: 4 - 15 by 8 polished alum. center lines f/s I will pass a dear ran Into the side of the camaro and I have to replace the fender, winshield,door, and pull a dent out of the rear quarter. No cash to get them __________________ My Rides 1969 Mustang gt coupe 1971 Chevy Cheyenne 1986 Iroc camaro 1986 K10 Short Bed 1987 Iroc Camaro 1990 rs Camaro 1992 350 ss truck 1998 Honda Civic 2005 Ram 2500 Cummins My Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=279831

06-15-2008, 09:01 PM	#13
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: 4 - 15 by 8 polished alum. center lines f/s Sorry To Hear That I No How That Goes Something Always Tries To Get The Toy Money. __________________ i have 67/72 chevy truck parts f/s.

06-23-2008, 03:04 AM	#14
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: 4 - 15 by 8 polished alum. center lines f/s i have lowered the price to $350.00. __________________ i have 67/72 chevy truck parts f/s.

06-23-2008, 04:27 PM	#15
70c10 67-72 Addict! Join Date: Feb 2002 Location: The TAX State! Posts: 7,856	Re: 4 - 15 by 8 polished alum. center lines f/s Bill, this is what the same rims look like on my truck http://drchop.smugmug.com/gallery/52...09_GSXka-X2-LB __________________ Jim 1970 C/10 Fleetside w/Ghost Flames Lowered 4.5" front and 4" rear (Raked) 355/350 Turbo w/shift kit 10" Redneck Performance Verter w/2500 stall Hooker Super Comps part#2808-1 Performer RPM Air-Gap 12 Bolt w/3:73 gears- Eaton Posi Comp Cams XE262 with 1.6 Crane Energizers, Road Demon 625 and Brodix IK 180 heads

06-24-2008, 01:11 AM	#16
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: 4 - 15 by 8 polished alum. center lines f/s they look good on your truck. i don't think mine will clean up that nice but they look good enough for a daily driver. __________________ i have 67/72 chevy truck parts f/s.



Register or Log In To remove these advertisements.

07-10-2008, 08:11 PM	#17
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: 4 - 15 by 8 polished alum. center lines f/s Price Lowered To $300.00. __________________ i have 67/72 chevy truck parts f/s.

07-11-2008, 08:59 AM	#18
70c10 67-72 Addict! Join Date: Feb 2002 Location: The TAX State! Posts: 7,856	Re: 4 - 15 by 8 polished alum. center lines f/s Bill, those will easily clean up like new with wheel polish Summitracing sells those same rims for about $275 each __________________ Jim 1970 C/10 Fleetside w/Ghost Flames Lowered 4.5" front and 4" rear (Raked) 355/350 Turbo w/shift kit 10" Redneck Performance Verter w/2500 stall Hooker Super Comps part#2808-1 Performer RPM Air-Gap 12 Bolt w/3:73 gears- Eaton Posi Comp Cams XE262 with 1.6 Crane Energizers, Road Demon 625 and Brodix IK 180 heads

07-11-2008, 12:19 PM	#19
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: 4 - 15 by 8 polished alum. center lines f/s i have cleaned them up a couple of times with mothers polish and they looked good. __________________ i have 67/72 chevy truck parts f/s.

Register or Log In To remove these advertisements.