Good Left Front Inner Fender - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Green Machine · 06-15-2008, 08:48 PM

Good left original inner fender from a 1971. Fits 67-72. Just took it off today. I ordered two new ones, right side was toast. Guess I didnt check left side very close, nothing wrong with it. Drivers side has light surface rust, but all is solid, even the brace where they usually start to rust out. $50 or ? plus the ride.

*Shane* · 06-15-2008, 09:38 PM

how much for the ride to 35613?

Green Machine · 06-15-2008, 10:50 PM

I'll weigh(and measure) it and check around tommorow, I think DHL is reasonable on odd items like that.

72BlckButy · 06-15-2008, 10:50 PM

What about shipping to 65102?

Green Machine · 06-15-2008, 11:01 PM

Sure - I'll check on that too while I'm at it.

Green Machine · 06-16-2008, 11:25 AM

DHL shipping to 35613 (Shane) would be about $69

DHL shipping to 65102 (72BlckButy) would be about $65

Tub weighs 15 lbs and measures about 46 long, 20 high and 26 wide.

If you can find a cheaper shipper thats fine with me - my zip is 51334.

Let me know

GM

c10crazy · 06-16-2008, 11:53 AM

Those rates are great! I checked once on shipping these and they were well over $100.

Hotrodhenryj · 06-16-2008, 06:32 PM

Wrap it in plastic and take it to Fedex, I shipped to to Washington for 40 bucks

*Shane* · 06-16-2008, 06:35 PM

I'll pass ... many thanks for all the legwork for us.

Green Machine · 06-17-2008, 12:36 AM

72BlckButy - you are next - checked fedex they were higher by quite a bit - like $100.

Green Machine · 06-18-2008, 01:43 PM

Anyone else ? I know shpping is high, I want find a good home for this, but not going to hang on to it too long.

Green Machine · 06-20-2008, 10:20 PM

I'll take any reasonable offer - I know shipping is high, I just hate to see it made into Toyota parts !!!

HOTFUN · 06-21-2008, 02:46 AM

I just left Okoboji yesterday after a beautiful week up there. I should have checked the board while I was there I might have fit that in my mini van. ttt for ya.

Green Machine · 06-22-2008, 11:49 AM

ttt - one more time, then off to the scrapper

72BlckButy · 06-22-2008, 06:36 PM

Sorry Green Machine... I completely missed this thread apparently. Are you planning on heading this way any time? Shipping is a little steep for me. Are you heading to the Midwest All Truck Nat's in Riverside, MO September 5-7? I would love to save this rust free inner fender.

Green Machine · 06-22-2008, 08:55 PM

No, sorry not headed that way, yeah shipping with the fuel is getting bad, and doesn't help that we live 10 miles from nowhere !

72BlckButy · 06-22-2008, 09:30 PM

Well, thanks for the extra work on providing shipping costs, but I think I'm going to have to pass. By chance are you headed to the Goodguy's event in Des Moines?

IvelDesigns · 06-23-2008, 01:15 AM

yeah, if you can get it to DM, i can get it to Nate in september.

doesn't have to be at the good guys show either... if you plan to come to DM anytime this summer we can work it out.

72BlckButy · 06-24-2008, 08:23 AM

Thanks for the offer Ivel! Let's see what Green Machine thinks... I'd like to see this part saved, rather than scraped.

Green Machine · 06-24-2008, 11:54 AM

Found a home for it close to here - SOLD

72BlckButy · 06-24-2008, 02:12 PM

Darn... but I'm glad to hear that they sold. Thanks again Ivel!

06-15-2008, 08:48 PM	#1
Green Machine Senior Member Join Date: Jul 2004 Location: Estherville, Iowa Posts: 3,371	Good Left Front Inner Fender Good left original inner fender from a 1971. Fits 67-72. Just took it off today. I ordered two new ones, right side was toast. Guess I didnt check left side very close, nothing wrong with it. Drivers side has light surface rust, but all is solid, even the brace where they usually start to rust out. $50 or ? plus the ride. Attached Images __________________ 1968 C10 307 3spd Long Fleet ------ http://67-72chevytrucks.com/vboard/s...d.php?t=201103 1970 C10 305 Super T10 Long Fleet --- http://67-72chevytrucks.com/vboard/s...d.php?t=202285 1971 C20 383 TH350 Dana Posi ----- http://67-72chevytrucks.com/vboard/s...d.php?t=206894 2001 GMC Sierra 1500 C3 6.0 Last edited by Green Machine; 06-15-2008 at 10:40 PM.

06-15-2008, 09:38 PM	#2
Shane Account Suspended Join Date: Jun 2000 Location: over yonder Posts: 14,270	Re: Good Left Front Inner Fender how much for the ride to 35613?

06-15-2008, 10:50 PM	#3
Green Machine Senior Member Join Date: Jul 2004 Location: Estherville, Iowa Posts: 3,371	Re: Good Left Front Inner Fender I'll weigh(and measure) it and check around tommorow, I think DHL is reasonable on odd items like that. __________________ 1968 C10 307 3spd Long Fleet ------ http://67-72chevytrucks.com/vboard/s...d.php?t=201103 1970 C10 305 Super T10 Long Fleet --- http://67-72chevytrucks.com/vboard/s...d.php?t=202285 1971 C20 383 TH350 Dana Posi ----- http://67-72chevytrucks.com/vboard/s...d.php?t=206894 2001 GMC Sierra 1500 C3 6.0

06-15-2008, 10:50 PM	#4
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: Good Left Front Inner Fender What about shipping to 65102? __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)

06-15-2008, 11:01 PM	#5
Green Machine Senior Member Join Date: Jul 2004 Location: Estherville, Iowa Posts: 3,371	Re: Good Left Front Inner Fender Sure - I'll check on that too while I'm at it. __________________ 1968 C10 307 3spd Long Fleet ------ http://67-72chevytrucks.com/vboard/s...d.php?t=201103 1970 C10 305 Super T10 Long Fleet --- http://67-72chevytrucks.com/vboard/s...d.php?t=202285 1971 C20 383 TH350 Dana Posi ----- http://67-72chevytrucks.com/vboard/s...d.php?t=206894 2001 GMC Sierra 1500 C3 6.0

06-16-2008, 11:25 AM	#6
Green Machine Senior Member Join Date: Jul 2004 Location: Estherville, Iowa Posts: 3,371	Re: Good Left Front Inner Fender DHL shipping to 35613 (Shane) would be about $69 DHL shipping to 65102 (72BlckButy) would be about $65 Tub weighs 15 lbs and measures about 46 long, 20 high and 26 wide. If you can find a cheaper shipper thats fine with me - my zip is 51334. Let me know GM __________________ 1968 C10 307 3spd Long Fleet ------ http://67-72chevytrucks.com/vboard/s...d.php?t=201103 1970 C10 305 Super T10 Long Fleet --- http://67-72chevytrucks.com/vboard/s...d.php?t=202285 1971 C20 383 TH350 Dana Posi ----- http://67-72chevytrucks.com/vboard/s...d.php?t=206894 2001 GMC Sierra 1500 C3 6.0

06-16-2008, 11:53 AM	#7
c10crazy Like a Rock! Join Date: May 2002 Location: USA Posts: 1,092	Re: Good Left Front Inner Fender Those rates are great! I checked once on shipping these and they were well over $100. __________________ 69 LWB Runs great - work in progress Mess with me and you mess with the whole trailer park!

06-16-2008, 06:32 PM	#8
Hotrodhenryj Truck Farmer Join Date: Nov 2001 Location: Lake Havasu City, Arizona Posts: 1,192	Re: Good Left Front Inner Fender Wrap it in plastic and take it to Fedex, I shipped to to Washington for 40 bucks __________________ Arizona rust free sheetmetal

06-16-2008, 06:35 PM	#9
Shane Account Suspended Join Date: Jun 2000 Location: over yonder Posts: 14,270	Re: Good Left Front Inner Fender I'll pass ... many thanks for all the legwork for us.

06-17-2008, 12:36 AM	#10
Green Machine Senior Member Join Date: Jul 2004 Location: Estherville, Iowa Posts: 3,371	Re: Good Left Front Inner Fender 72BlckButy - you are next - checked fedex they were higher by quite a bit - like $100. __________________ 1968 C10 307 3spd Long Fleet ------ http://67-72chevytrucks.com/vboard/s...d.php?t=201103 1970 C10 305 Super T10 Long Fleet --- http://67-72chevytrucks.com/vboard/s...d.php?t=202285 1971 C20 383 TH350 Dana Posi ----- http://67-72chevytrucks.com/vboard/s...d.php?t=206894 2001 GMC Sierra 1500 C3 6.0

06-18-2008, 01:43 PM	#11
Green Machine Senior Member Join Date: Jul 2004 Location: Estherville, Iowa Posts: 3,371	Re: Good Left Front Inner Fender Anyone else ? I know shpping is high, I want find a good home for this, but not going to hang on to it too long. __________________ 1968 C10 307 3spd Long Fleet ------ http://67-72chevytrucks.com/vboard/s...d.php?t=201103 1970 C10 305 Super T10 Long Fleet --- http://67-72chevytrucks.com/vboard/s...d.php?t=202285 1971 C20 383 TH350 Dana Posi ----- http://67-72chevytrucks.com/vboard/s...d.php?t=206894 2001 GMC Sierra 1500 C3 6.0

06-20-2008, 10:20 PM	#12
Green Machine Senior Member Join Date: Jul 2004 Location: Estherville, Iowa Posts: 3,371	Re: Good Left Front Inner Fender I'll take any reasonable offer - I know shipping is high, I just hate to see it made into Toyota parts !!! __________________ 1968 C10 307 3spd Long Fleet ------ http://67-72chevytrucks.com/vboard/s...d.php?t=201103 1970 C10 305 Super T10 Long Fleet --- http://67-72chevytrucks.com/vboard/s...d.php?t=202285 1971 C20 383 TH350 Dana Posi ----- http://67-72chevytrucks.com/vboard/s...d.php?t=206894 2001 GMC Sierra 1500 C3 6.0

06-21-2008, 02:46 AM	#13
HOTFUN Registered User Join Date: Jan 2001 Location: Lincoln, Nebraska Posts: 2,145	Re: Good Left Front Inner Fender I just left Okoboji yesterday after a beautiful week up there. I should have checked the board while I was there I might have fit that in my mini van. ttt for ya. __________________ '66 CST BBW swb fleet 327 fac ac '67 CST 4x4 swb 327 stepside project '72 Cheyenne K20 50k original '72 Cheyenne Super K20 project '73 Sierra swb 4x4 frame off in paint stage '74 Cheyenne Super swb w/16k actual '71 & 72 Cheyenne K10 4x4 swb's '70 426 HEMICUDA conv SHAKER 4 sp Dana 60 '60 Impala conv 327 PG fac ac loaded 3rd owner '72 GMC K2500 4x4 '59 Apache CST BBW fleetside swb 283 '73 ElCamino SS LS1 T56 true SS bucket tach '76 ElCamino SS 52k survivor '87 Grand National 41k True 2nd to last built in 1987. '86 K30 454 SRW fleetside CA since new '88 Trans Am GTA 39k bought new 2018 DEMON plum crazy @ 840HP! "Need for speed"

06-22-2008, 11:49 AM	#14
Green Machine Senior Member Join Date: Jul 2004 Location: Estherville, Iowa Posts: 3,371	Re: Good Left Front Inner Fender ttt - one more time, then off to the scrapper __________________ 1968 C10 307 3spd Long Fleet ------ http://67-72chevytrucks.com/vboard/s...d.php?t=201103 1970 C10 305 Super T10 Long Fleet --- http://67-72chevytrucks.com/vboard/s...d.php?t=202285 1971 C20 383 TH350 Dana Posi ----- http://67-72chevytrucks.com/vboard/s...d.php?t=206894 2001 GMC Sierra 1500 C3 6.0

06-22-2008, 06:36 PM	#15
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: Good Left Front Inner Fender Sorry Green Machine... I completely missed this thread apparently. Are you planning on heading this way any time? Shipping is a little steep for me. Are you heading to the Midwest All Truck Nat's in Riverside, MO September 5-7? I would love to save this rust free inner fender. __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)



Register or Log In To remove these advertisements.

06-22-2008, 08:55 PM	#16
Green Machine Senior Member Join Date: Jul 2004 Location: Estherville, Iowa Posts: 3,371	Re: Good Left Front Inner Fender No, sorry not headed that way, yeah shipping with the fuel is getting bad, and doesn't help that we live 10 miles from nowhere ! __________________ 1968 C10 307 3spd Long Fleet ------ http://67-72chevytrucks.com/vboard/s...d.php?t=201103 1970 C10 305 Super T10 Long Fleet --- http://67-72chevytrucks.com/vboard/s...d.php?t=202285 1971 C20 383 TH350 Dana Posi ----- http://67-72chevytrucks.com/vboard/s...d.php?t=206894 2001 GMC Sierra 1500 C3 6.0

06-22-2008, 09:30 PM	#17
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: Good Left Front Inner Fender Well, thanks for the extra work on providing shipping costs, but I think I'm going to have to pass. By chance are you headed to the Goodguy's event in Des Moines? __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)

06-23-2008, 01:15 AM	#18
IvelDesigns Commander Taco Bello Join Date: Sep 2006 Location: Des Moines, Iowa Posts: 2,232	Re: Good Left Front Inner Fender yeah, if you can get it to DM, i can get it to Nate in september. doesn't have to be at the good guys show either... if you plan to come to DM anytime this summer we can work it out. __________________ Bagged '50 3600 - Bumper punchin' road kill since 2009... Bagged '69 C10 Longbed - Bumper punchin' road kill since 2007...

06-24-2008, 08:23 AM	#19
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: Good Left Front Inner Fender Thanks for the offer Ivel! Let's see what Green Machine thinks... I'd like to see this part saved, rather than scraped. __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)

06-24-2008, 11:54 AM	#20
Green Machine Senior Member Join Date: Jul 2004 Location: Estherville, Iowa Posts: 3,371	Re: Good Left Front Inner Fender Found a home for it close to here - SOLD __________________ 1968 C10 307 3spd Long Fleet ------ http://67-72chevytrucks.com/vboard/s...d.php?t=201103 1970 C10 305 Super T10 Long Fleet --- http://67-72chevytrucks.com/vboard/s...d.php?t=202285 1971 C20 383 TH350 Dana Posi ----- http://67-72chevytrucks.com/vboard/s...d.php?t=206894 2001 GMC Sierra 1500 C3 6.0

06-24-2008, 02:12 PM	#21
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: Good Left Front Inner Fender Darn... but I'm glad to hear that they sold. Thanks again Ivel! __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)

Register or Log In To remove these advertisements.