Is it just me.. or does anyone else not know how these blazer tanks fit in?? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

smoknbarrels · 06-16-2008, 10:20 AM

I stand here scratching my head how these fargin straps go.. I just don't see how this thing fits on. can anyone give me some insight on how to install this tank. I just don't see how it fits underneath my '67 truck.
i even have my box off and i can't see it. where do those hooks go?

if anyone has a few photos it would be worth 2000 words.

vtblazer · 06-16-2008, 10:25 AM

Sure you don't wanna post this over in the truck section?

cameeks · 06-16-2008, 11:07 AM

I have pics of mine in my build thread below. I just drilled new holes so I can mount mine further back. Down side to mounting it further back is that I had to notch out more of the brace for the bed. There should be stack holes for these if you don't want to drill them for the burban they might be closer to the axle. I'm going to clean up some of the holes when I go to finish the truck.

smoknbarrels · 06-16-2008, 11:31 AM

awesome filler hole location..

but how does the other side of the staps connect? I only got two hook bolts in my kit.. should I have 4? (2 for each strap)

cameeks · 06-16-2008, 02:15 PM

I had to go to the hardware store and buy two bolts for the other side. It bolts flush to the frame with no gap. Also on the hook bolts put the threaded side down. With no bed it is easy to bolt with the threads up on the frame but when I put the bed on I had to flip them over.

LUV2XCLR8 · 06-17-2008, 02:46 PM

Blazer/Jimmy tank kits only come with 2 bolts, like meeks said, hardware store

smoknbarrels · 06-18-2008, 08:28 PM

how retarded, why even call it a kit!?

why don't they just say:

Blazer tank with some parts included (requires complete assembly).

ah well, also looks like I gotta drill some more frame holes too!?

06-16-2008, 10:20 AM	#1
smoknbarrels Registered Mail Join Date: Jun 2006 Location: Alberta, Canada Posts: 513	Is it just me.. or does anyone else not know how these blazer tanks fit in?? I stand here scratching my head how these fargin straps go.. I just don't see how this thing fits on. can anyone give me some insight on how to install this tank. I just don't see how it fits underneath my '67 truck. i even have my box off and i can't see it. where do those hooks go? if anyone has a few photos it would be worth 2000 words. __________________ '67 chev 496, lwb to swb, bagged - pro street project

06-16-2008, 10:25 AM	#2
vtblazer Registered User Join Date: Oct 2003 Location: Central Vermont Posts: 8,537	Re: Is it just me.. or does anyone else not know how these blazer tanks fit in?? Sure you don't wanna post this over in the truck section?

06-16-2008, 11:07 AM	#3
cameeks Long Fleet Club Join Date: Aug 2006 Location: Deer Park, TX Posts: 5,666	Re: Is it just me.. or does anyone else not know how these blazer tanks fit in?? I have pics of mine in my build thread below. I just drilled new holes so I can mount mine further back. Down side to mounting it further back is that I had to notch out more of the brace for the bed. There should be stack holes for these if you don't want to drill them for the burban they might be closer to the axle. I'm going to clean up some of the holes when I go to finish the truck. __________________ Chris Meeks '69 Chevy Custom/10 Long Bed <-- Thread of the work I did before selling. Truck is now finished to the new owners design and running around. I was shown some pictures of the finished product. At least it survived the junk yard. FAQ Index by Krue Site Vendors Subscribe Here Forum Rules Last edited by cameeks; 06-16-2008 at 11:16 AM.

06-16-2008, 11:31 AM	#4
smoknbarrels Registered Mail Join Date: Jun 2006 Location: Alberta, Canada Posts: 513	Re: Is it just me.. or does anyone else not know how these blazer tanks fit in?? awesome filler hole location.. but how does the other side of the staps connect? I only got two hook bolts in my kit.. should I have 4? (2 for each strap) __________________ '67 chev 496, lwb to swb, bagged - pro street project

06-16-2008, 02:15 PM	#5
cameeks Long Fleet Club Join Date: Aug 2006 Location: Deer Park, TX Posts: 5,666	Re: Is it just me.. or does anyone else not know how these blazer tanks fit in?? I had to go to the hardware store and buy two bolts for the other side. It bolts flush to the frame with no gap. Also on the hook bolts put the threaded side down. With no bed it is easy to bolt with the threads up on the frame but when I put the bed on I had to flip them over. __________________ Chris Meeks '69 Chevy Custom/10 Long Bed <-- Thread of the work I did before selling. Truck is now finished to the new owners design and running around. I was shown some pictures of the finished product. At least it survived the junk yard. FAQ Index by Krue Site Vendors Subscribe Here Forum Rules

06-17-2008, 02:46 PM	#6
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,468	Re: Is it just me.. or does anyone else not know how these blazer tanks fit in?? Blazer/Jimmy tank kits only come with 2 bolts, like meeks said, hardware store __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

06-18-2008, 08:28 PM	#7
smoknbarrels Registered Mail Join Date: Jun 2006 Location: Alberta, Canada Posts: 513	Re: Is it just me.. or does anyone else not know how these blazer tanks fit in?? how retarded, why even call it a kit!? why don't they just say: Blazer tank with some parts included (requires complete assembly). ah well, also looks like I gotta drill some more frame holes too!? __________________ '67 chev 496, lwb to swb, bagged - pro street project



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.