I need to get rid of some good usable parts or they'll go to...... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Southern C10 · 06-25-2008, 12:29 PM

I have these original parts that came off my 72 GMC. Doors and hood have been sandblasted and are not warped. All parts are also either primed and painted or just primed to prevent rust. The hood and doors have just a little bondo in them but are straight and rust free. The front bumper is almost perfect. The two front fenders are 90% perfect. They have no rust or bondo. They are straight and clean. The core support is good with just a little rust under the battery tray but that dosent effect the structure and it still has the four headlights attached. The two rear wheel wells are decent but have a few dings in them and some rust spots. the grille is decent with some dings.

Im not looking to make a killing on these. I actually would just like a little money for the hood, fenders, doors, core, and bumper. All the rest ill just give to whoever needs/wants them. Feel free to make any reasonable offer.

I am in Gadsden Alabama right now but will be traveling up I-59 to I-24 near Chattanooga then thru Nashville TN to Clarksville TN on July 1st. If anyone wants to meet me along the way. Or I can go I-59 to Birmingham then I-65 to Nashville. Email me at rakk112000@yahoo.com for more pics.

Ill also put an add in my paper back home but anything that dosent sell Ill have to scrap. I dont have the room for them. I would much rather have someone use them.

Doors- $SOLD PENDING PAYMENT
Fenders - $75. ea. $SOLD PENDING PAYMENT
Core - $65.
Hood - $65.
Grille - FREE. You pay Shipping.
Inner fender wells- $75.00 for both Decent shape EMAIL FOR PICS
I also have some good sounding FLOWMASTER mufflers $35. + Shipping
Thanks, Brian.

**truckdude239** · 06-25-2008, 12:58 PM

you must be a site supporter to post a forsale thread please clickt he link in my sig for more info

Southern C10 · 06-25-2008, 03:52 PM

Ok,
Dues are paid. Is this the right place to post these for sale or do I need to list them somewhere else?

Thanks.

*Dylan · 06-25-2008, 03:57 PM

Yeah, go down the main forum page a little ways and there's a place for for sale ads/threads. Go post it up there or see if you can find a staff member to move it for you. I'm sure they wouldn't mind helping you out.

Southern C10 · 06-25-2008, 04:00 PM

Thanks 1967 C10 Dylan.

Could someone move this over for me? Thanks.

**raggedjim** · 06-25-2008, 04:01 PM

Once you get them in Clarksville I would be interested in the fenders, doors, radiator support. How much do you want for them?

Rg

**lks dcvn** · 06-25-2008, 04:11 PM

getting in line for doors and front bumper...

krue · 06-25-2008, 04:12 PM

I'll move it for you. Are you coming to the board meet?

Southern C10 · 06-25-2008, 04:59 PM

Krue,
Id love to come but I will be in North Carolina for a School. Uncle Sam gives me the money but not the time to finish my truck.

**raggedjim** · 06-25-2008, 05:09 PM

Still looking for price on fenders and doors, don't need the radiator support.

Thanks, Rg

Southern C10 · 06-25-2008, 05:10 PM

RG, PM sent. Thanks.

**raggedjim** · 06-25-2008, 05:16 PM

Yeah, sorry I just noticed it!

I'll take the doors when you get them to Clarksville (are you going to be there awhile???)

Don't really need the other stuff, thanks, Rg

chachi127 · 06-26-2008, 12:25 AM

In line for rear wheel wells pending a picture. Please post picture of wells here or send to chachi127@hotmail.com I know they're free but still want to know the condition. Thanks in advance!

FITS2AT · 06-26-2008, 11:00 AM

Put me in line for doors.

msgross · 06-26-2008, 02:09 PM

I would like to see a pic of the wheel wells too, I'm raelly only concerned in the area that bolts to the bedside. I want to graft them into my bedsides since mine are rotted.... thanks

Southern C10 · 06-27-2008, 11:10 AM

Heres the fender wells and the grille. The wells have a little surface rust from the rain last night and you can see the rust thru spots.

Im also going to have my bed floor with all cross members and the bed front panel for sale once I get them apart and primed.

Thanks.

MrGoodpliers · 06-27-2008, 12:33 PM

Interested in grille and bumper...

msgross · 06-27-2008, 12:55 PM

i'll take those wheel wells if it makes to me.. I posted earlier as well. Thanks...

PM me if it does..

*Shane* · 06-27-2008, 01:40 PM

do you have front inner fenders? if so, what kind of shape and how much?

i'm right off of I-65 between B-ham and Nashville ... we can work something out.

thanks,
shane

Southern C10 · 06-27-2008, 03:34 PM

Shane, msgross, MrGoodpliers you all have PMs.

Bumper sold, Thanks lks dcvn!!!

New parts added and lower price on hood.

msgross · 06-27-2008, 05:03 PM

thanks... let me know

chachi127 · 06-28-2008, 12:49 AM

I'll take the wheel wells! Thanks I'll pm or email you on the details of payment.

Southern C10 · 06-29-2008, 05:28 PM

If shane buys my inner fender wells then im heading down I-59 to I-65 then up to Nashville and on To Clarksville. Anybody on that route need a hood or core you can save money on shipping.

short-t · 06-29-2008, 05:46 PM

Are the fenders sold? If not please put me inline.

Southern C10 · 06-29-2008, 06:05 PM

So far. Waiting payment but will PM you if they fall thru. Thanks.

06-25-2008, 12:29 PM	#1
Southern C10 Is it done yet? Join Date: Apr 2008 Location: Whispering Pines, NC Posts: 826	I need to get rid of some good usable parts or they'll go to...... I have these original parts that came off my 72 GMC. Doors and hood have been sandblasted and are not warped. All parts are also either primed and painted or just primed to prevent rust. The hood and doors have just a little bondo in them but are straight and rust free. The front bumper is almost perfect. The two front fenders are 90% perfect. They have no rust or bondo. They are straight and clean. The core support is good with just a little rust under the battery tray but that dosent effect the structure and it still has the four headlights attached. The two rear wheel wells are decent but have a few dings in them and some rust spots. the grille is decent with some dings. Im not looking to make a killing on these. I actually would just like a little money for the hood, fenders, doors, core, and bumper. All the rest ill just give to whoever needs/wants them. Feel free to make any reasonable offer. I am in Gadsden Alabama right now but will be traveling up I-59 to I-24 near Chattanooga then thru Nashville TN to Clarksville TN on July 1st. If anyone wants to meet me along the way. Or I can go I-59 to Birmingham then I-65 to Nashville. Email me at rakk112000@yahoo.com for more pics. Ill also put an add in my paper back home but anything that dosent sell Ill have to scrap. I dont have the room for them. I would much rather have someone use them. Doors- $SOLD PENDING PAYMENT Fenders - $75. ea. $SOLD PENDING PAYMENT Core - $65. Hood - $65. Grille - FREE. You pay Shipping. Inner fender wells- $75.00 for both Decent shape EMAIL FOR PICS *I also have some good sounding FLOWMASTER mufflers $35. + Shipping* Thanks, Brian. Attached Images __________________ 1972 Chevy SWB New 383 Stroker/350 Turbo Some day i'll paint it John 3:16 MY BUILD THREAD http://67-72chevytrucks.com/vboard/s...d.php?t=398108 Last edited by Southern C10; 07-02-2008 at 10:27 AM. Reason: Prices Added

06-25-2008, 12:58 PM	#2
truckdude239 Senior Member Join Date: Sep 2005 Location: Lewisville, Nc Posts: 10,233	Re: I need to get rid of some good usable parts or they'll go to...... you must be a site supporter to post a forsale thread please clickt he link in my sig for more info __________________ David fuller Ase Certified Mechanic Click here to help support our board!! 1971 Chevy c-10 under going a 4.8l LSx swap Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=421305 2007 Honda Accord my daily 145kmiles 2002 Honda Accord 4 door With 330k(sisters car) 2005 toyota Avalon 228k( brothers car) 2002 Sububran 5.3 245k 2000 Tahoe 5.3l 378 General manager for Marco's Carwash & lube

06-25-2008, 03:52 PM	#3
Southern C10 Is it done yet? Join Date: Apr 2008 Location: Whispering Pines, NC Posts: 826	Re: I need to get rid of some good usable parts or they'll go to...... Ok, Dues are paid. Is this the right place to post these for sale or do I need to list them somewhere else? Thanks. __________________ 1972 Chevy SWB New 383 Stroker/350 Turbo Some day i'll paint it John 3:16 MY BUILD THREAD http://67-72chevytrucks.com/vboard/s...d.php?t=398108

06-25-2008, 03:57 PM	#4
*Dylan Mean Buzzin' Half Dozen Join Date: Mar 2008 Location: Orlando, Florida Posts: 1,081	Re: I need to get rid of some good usable parts or they'll go to...... Yeah, go down the main forum page a little ways and there's a place for for sale ads/threads. Go post it up there or see if you can find a staff member to move it for you. I'm sure they wouldn't mind helping you out. __________________ "War is an ugly thing, but not the ugliest of things. The decayed and degraded state of moral and patriotic feeling which thinks that nothing is worth war is much worse. The person who has nothing for which he is willing to fight, nothing which is more important than his own personal safety, is a miserable creature and has no chance of being free unless made and kept so by the exertions of better men than himself." MY TRUCK (Now for sale) 1967 C10 SWB *Dylan* IIMY?

06-25-2008, 04:00 PM	#5
Southern C10 Is it done yet? Join Date: Apr 2008 Location: Whispering Pines, NC Posts: 826	Re: I need to get rid of some good usable parts or they'll go to...... Thanks 1967 C10 Dylan. Could someone move this over for me? Thanks. __________________ 1972 Chevy SWB New 383 Stroker/350 Turbo Some day i'll paint it John 3:16 MY BUILD THREAD http://67-72chevytrucks.com/vboard/s...d.php?t=398108

06-25-2008, 04:01 PM	#6
raggedjim Senior Member Join Date: Jun 2002 Location: Murray, Kentucky Posts: 3,460	Re: I need to get rid of some good usable parts or they'll go to...... Once you get them in Clarksville I would be interested in the fenders, doors, radiator support. How much do you want for them? Rg __________________ Roger '68 Short step - https://67-72chevytrucks.com/vboard/...d.php?t=849675 '69 ('70?) 2wd Blazer '70 GMC Jimmy 2wd '73 Firebird - https://67-72chevytrucks.com/vboard/...d.php?t=853203

06-25-2008, 04:11 PM	#7
lks dcvn Registered User Join Date: Jan 2007 Location: Columbus, Ohio Posts: 4,339	Re: I need to get rid of some good usable parts or they'll go to...... getting in line for doors and front bumper...

06-25-2008, 04:12 PM	#8
krue Designated A-hole! Join Date: Mar 2003 Location: South Mississippi Posts: 36,450	Re: I need to get rid of some good usable parts or they'll go to...... I'll move it for you. Are you coming to the board meet? __________________ "If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck"

06-25-2008, 04:59 PM	#9
Southern C10 Is it done yet? Join Date: Apr 2008 Location: Whispering Pines, NC Posts: 826	Re: I need to get rid of some good usable parts or they'll go to...... Krue, Id love to come but I will be in North Carolina for a School. Uncle Sam gives me the money but not the time to finish my truck. __________________ 1972 Chevy SWB New 383 Stroker/350 Turbo Some day i'll paint it John 3:16 MY BUILD THREAD http://67-72chevytrucks.com/vboard/s...d.php?t=398108

06-25-2008, 05:09 PM	#10
raggedjim Senior Member Join Date: Jun 2002 Location: Murray, Kentucky Posts: 3,460	Re: I need to get rid of some good usable parts or they'll go to...... Still looking for price on fenders and doors, don't need the radiator support. Thanks, Rg __________________ Roger '68 Short step - https://67-72chevytrucks.com/vboard/...d.php?t=849675 '69 ('70?) 2wd Blazer '70 GMC Jimmy 2wd '73 Firebird - https://67-72chevytrucks.com/vboard/...d.php?t=853203 Last edited by raggedjim; 06-25-2008 at 05:09 PM.

06-25-2008, 05:10 PM	#11
Southern C10 Is it done yet? Join Date: Apr 2008 Location: Whispering Pines, NC Posts: 826	Re: I need to get rid of some good usable parts or they'll go to...... RG, PM sent. Thanks. __________________ 1972 Chevy SWB New 383 Stroker/350 Turbo Some day i'll paint it John 3:16 MY BUILD THREAD http://67-72chevytrucks.com/vboard/s...d.php?t=398108

06-25-2008, 05:16 PM	#12
raggedjim Senior Member Join Date: Jun 2002 Location: Murray, Kentucky Posts: 3,460	Re: I need to get rid of some good usable parts or they'll go to...... Yeah, sorry I just noticed it! I'll take the doors when you get them to Clarksville (are you going to be there awhile???) Don't really need the other stuff, thanks, Rg __________________ Roger '68 Short step - https://67-72chevytrucks.com/vboard/...d.php?t=849675 '69 ('70?) 2wd Blazer '70 GMC Jimmy 2wd '73 Firebird - https://67-72chevytrucks.com/vboard/...d.php?t=853203

06-26-2008, 12:25 AM	#13
chachi127 Registered User Join Date: Jan 2006 Location: Racine, WI Posts: 73	Re: I need to get rid of some good usable parts or they'll go to...... In line for rear wheel wells pending a picture. Please post picture of wells here or send to chachi127@hotmail.com I know they're free but still want to know the condition. Thanks in advance! __________________ 1972 GMC 'Project Red' Long Road Ahead

06-26-2008, 11:00 AM	#14
FITS2AT Registered User Join Date: Oct 2006 Location: Dickson Tennessee Posts: 91	Re: I need to get rid of some good usable parts or they'll go to...... Put me in line for doors. __________________

06-26-2008, 02:09 PM	#15
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: I need to get rid of some good usable parts or they'll go to...... I would like to see a pic of the wheel wells too, I'm raelly only concerned in the area that bolts to the bedside. I want to graft them into my bedsides since mine are rotted.... thanks __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer"



Register or Log In To remove these advertisements.

06-27-2008, 11:10 AM	#16
Southern C10 Is it done yet? Join Date: Apr 2008 Location: Whispering Pines, NC Posts: 826	Re: I need to get rid of some good usable parts or they'll go to...... Heres the fender wells and the grille. The wells have a little surface rust from the rain last night and you can see the rust thru spots. Im also going to have my bed floor with all cross members and the bed front panel for sale once I get them apart and primed. Thanks. Attached Images __________________ 1972 Chevy SWB New 383 Stroker/350 Turbo Some day i'll paint it John 3:16 MY BUILD THREAD http://67-72chevytrucks.com/vboard/s...d.php?t=398108

06-27-2008, 12:33 PM	#17
MrGoodpliers Registered User Join Date: May 2002 Location: Gainesville, Georgia Posts: 704	Re: I need to get rid of some good usable parts or they'll go to...... Interested in grille and bumper... __________________ We made Oklahoma a little after 3, Randy & his brother Bob & my old GMC...

06-27-2008, 12:55 PM	#18
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: I need to get rid of some good usable parts or they'll go to...... i'll take those wheel wells if it makes to me.. I posted earlier as well. Thanks... PM me if it does.. __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer"

06-27-2008, 01:40 PM	#19
Shane Account Suspended Join Date: Jun 2000 Location: over yonder Posts: 14,270	Re: I need to get rid of some good usable parts or they'll go to...... do you have front inner fenders? if so, what kind of shape and how much? i'm right off of I-65 between B-ham and Nashville ... we can work something out. thanks, shane

06-27-2008, 03:34 PM	#20
Southern C10 Is it done yet? Join Date: Apr 2008 Location: Whispering Pines, NC Posts: 826	Re: I need to get rid of some good usable parts or they'll go to...... Shane, msgross, MrGoodpliers you all have PMs. Bumper sold, Thanks lks dcvn!!! New parts added and lower price on hood. __________________ 1972 Chevy SWB New 383 Stroker/350 Turbo Some day i'll paint it John 3:16 MY BUILD THREAD http://67-72chevytrucks.com/vboard/s...d.php?t=398108

06-27-2008, 05:03 PM	#21
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: I need to get rid of some good usable parts or they'll go to...... thanks... let me know __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer" Last edited by msgross; 06-27-2008 at 05:04 PM.

06-28-2008, 12:49 AM	#22
chachi127 Registered User Join Date: Jan 2006 Location: Racine, WI Posts: 73	Re: I need to get rid of some good usable parts or they'll go to...... I'll take the wheel wells! Thanks I'll pm or email you on the details of payment. __________________ 1972 GMC 'Project Red' Long Road Ahead

06-29-2008, 05:28 PM	#23
Southern C10 Is it done yet? Join Date: Apr 2008 Location: Whispering Pines, NC Posts: 826	Re: I need to get rid of some good usable parts or they'll go to...... If shane buys my inner fender wells then im heading down I-59 to I-65 then up to Nashville and on To Clarksville. Anybody on that route need a hood or core you can save money on shipping. __________________ 1972 Chevy SWB New 383 Stroker/350 Turbo Some day i'll paint it John 3:16 MY BUILD THREAD http://67-72chevytrucks.com/vboard/s...d.php?t=398108

06-29-2008, 05:46 PM	#24
short-t Registered User Join Date: Mar 2008 Location: Calgary, ab Posts: 325	Re: I need to get rid of some good usable parts or they'll go to...... Are the fenders sold? If not please put me inline.

06-29-2008, 06:05 PM	#25
Southern C10 Is it done yet? Join Date: Apr 2008 Location: Whispering Pines, NC Posts: 826	Re: I need to get rid of some good usable parts or they'll go to...... So far. Waiting payment but will PM you if they fall thru. Thanks. __________________ 1972 Chevy SWB New 383 Stroker/350 Turbo Some day i'll paint it John 3:16 MY BUILD THREAD http://67-72chevytrucks.com/vboard/s...d.php?t=398108

Register or Log In To remove these advertisements.