bbc headers ??? for 67 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

"67"StepSide · 06-25-2008, 08:34 PM

Can anyone tell me if any headers fit on my 67 two drive big block? other than the 67-72 chevy??

**Desert Rat** · 06-25-2008, 09:37 PM

I bought ones for a 73-87 truck and they fit fine. I did have to trim the frame to make the correct 68-71 style bb motor towers to fit. My frame was a '67 GMC.

corn · 06-26-2008, 06:16 PM

I have Hooker comps for chevelle on my 69. Nice fit & tuck in the rails a lot better than truck headers. I did have to modify the trans xo a bit to tuck the pipes up to match the headers though...

"67"StepSide · 06-26-2008, 06:17 PM

so they fit no problem? good to know i also trimmed my frame for motor mounts. i'm on to headers next, what brand did you get? thanks john

1bagged67 · 06-26-2008, 06:37 PM

I had a set of hooker super comps on my 67, part number 2841 for a 68 and up BBC.... Did not like them after I lowered the truck, they hung way below the frame and hit the ground when the bags where aired out... I seen that Corn used a set of chevelle headers on his truck so I bought a set of hooker comp headers part # 2455 for a BBC Chevelle... The only problem that I ran in to was the shift linkage hitting the collector and the driver side ART conrtol arm hitting the tubes. Moved the motor back about 1/2 inch and I was a happy man... well worth the time

**Desert Rat** · 06-28-2008, 03:59 PM

I had a cheapy set of Flowtechs. I never had any trouble with them. I'd use them again for the same application.

FRENCHBLUE72 · 06-28-2008, 10:39 PM

These also fit nice and do not hang below the frame..

http://store.summitracing.com/partde...0&autoview=sku

06-25-2008, 08:34 PM	#1
"67"StepSide Junior Member Join Date: Oct 2005 Location: connecticut Posts: 263	bbc headers ??? for 67 Can anyone tell me if any headers fit on my 67 two drive big block? other than the 67-72 chevy??

06-25-2008, 09:37 PM	#2
Desert Rat Senior Member Join Date: Dec 1999 Location: Darrington, Washington Posts: 3,963	Re: bbc headers ??? for 67 I bought ones for a 73-87 truck and they fit fine. I did have to trim the frame to make the correct 68-71 style bb motor towers to fit. My frame was a '67 GMC.

06-26-2008, 06:16 PM	#3
corn Registered User Join Date: Dec 2003 Location: here Posts: 5,789	Re: bbc headers ??? for 67 I have Hooker comps for chevelle on my 69. Nice fit & tuck in the rails a lot better than truck headers. I did have to modify the trans xo a bit to tuck the pipes up to match the headers though... Last edited by corn; 10-10-2009 at 12:15 PM.

06-26-2008, 06:17 PM	#4
"67"StepSide Junior Member Join Date: Oct 2005 Location: connecticut Posts: 263	Re: bbc headers ??? for 67 so they fit no problem? good to know i also trimmed my frame for motor mounts. i'm on to headers next, what brand did you get? thanks john

06-26-2008, 06:37 PM	#5
1bagged67 Registered User Join Date: Oct 2007 Location: murray, UT Posts: 7	Re: bbc headers ??? for 67 I had a set of hooker super comps on my 67, part number 2841 for a 68 and up BBC.... Did not like them after I lowered the truck, they hung way below the frame and hit the ground when the bags where aired out... I seen that Corn used a set of chevelle headers on his truck so I bought a set of hooker comp headers part # 2455 for a BBC Chevelle... The only problem that I ran in to was the shift linkage hitting the collector and the driver side ART conrtol arm hitting the tubes. Moved the motor back about 1/2 inch and I was a happy man... well worth the time

06-28-2008, 03:59 PM	#6
Desert Rat Senior Member Join Date: Dec 1999 Location: Darrington, Washington Posts: 3,963	Re: bbc headers ??? for 67 I had a cheapy set of Flowtechs. I never had any trouble with them. I'd use them again for the same application.

06-28-2008, 10:39 PM	#7
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,608	Re: bbc headers ??? for 67 These also fit nice and do not hang below the frame.. http://store.summitracing.com/partde...0&autoview=sku __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.