Eaton 4.10 center section AZ $20 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**t korinek** · 06-29-2008, 03:18 PM

Eaton 4.10 center section $20 + shipping. Not a posi, complete working section.
Tom 480-241-1318

64c20crewcab · 07-09-2008, 01:44 AM

Hey do ya still have this? I've got the eaton h052 in my 64 c20 crew cab. I sure hope you still have this!

I'll call you tomorrow

Thanks!
Norm in SoCal

heyjoe · 07-09-2008, 07:13 AM

How did I miss this?

64c20crewcab · 07-22-2008, 01:15 AM

Tom, It arrived today. Thanks Much! Plan to clean it up and install b4 summer is over. Thanks again!!

HeyJoe - Sorry Bro!

heyjoe · 07-22-2008, 07:41 AM

Thanks for the condolences - sniff, sniff...

How about sharing the story on the shipping with us who are still looking for a center section. How was it packaged, what shipper was used, weight, any tips?
Enquiring minds want to know.

64c20crewcab · 07-22-2008, 10:30 AM

Shipping from Meza AZ to Alhambra CA - $60 via DHL ground
Weight - 108lbs total
Here is a pic of the packaging. Milk crate w/t box formed around it and unit is then secured to the milk crate with tie wraps - these broke so maybe use chicken wire but it arrived to me without issue. I found the packaging method on this board.

Also here is a thread I started that lead me to this find. Will be posting more to it by Wednsday. Check it out: 'Eaton H052 - Drop Out Pumpkin Swap?'

heyjoe · 07-22-2008, 09:59 PM

Yes, I have been following that thread.
Many thanks for posting the shipping info, appreciate the photo - very helpfull.

**t korinek** · 07-23-2008, 02:19 AM

Those were some heavy duty tie wraps, next time baling wire should do it. I'm glad it didn't break out of the crate. DHL was the only one who would ship something that heavy to a residence.
I may have another one of these soon, probably won't be $20 though.

heyjoe · 07-23-2008, 07:03 AM

Quote:

Originally Posted by t korinek

I may have another one of these soon, probably won't be $20 though.

Please keep me in mind if you get another.
You have a PM

Longhorn Man · 07-23-2008, 04:11 PM

that is exactly how I ship them, shipped 2 or 3 now. I used the big fat zip ties, like 5 or 6 of them, and they never popped.

06-29-2008, 03:18 PM	#1
t korinek Truckin' Krazy Join Date: May 2000 Location: mesa az Posts: 6,193	Eaton 4.10 center section AZ $20 Eaton 4.10 center section $20 + shipping. Not a posi, complete working section. Tom 480-241-1318 __________________ Dealer for: American Auto Wire Precision weatherstripping Dakota Digital Trim parts Carpets Truck World seat covers & Many others Chevy Parts locator in Mesa AZ!

07-09-2008, 01:44 AM	#2
64c20crewcab Registered User Join Date: Jun 2008 Location: North SD County Posts: 631	Re: Eaton 4.10 center section AZ $20 Hey do ya still have this? I've got the eaton h052 in my 64 c20 crew cab. I sure hope you still have this! I'll call you tomorrow Thanks! Norm in SoCal __________________ ..............................._________ ......___________//___[[___{\ _____ ...../__(_(O)_)___/____/____/_(O)_/ 1964 C20 Long Stepside 3 Door Crew Cab - Armbruster-Stageway Conversion Y2K INDN Chief "ONE OF A KIND, NOT ONE OF THE CROWD" Aug 2010 - Front end frame cleanup & engine swap done!!! June 2011 - Rear end bagged Sept 2011 - Rebuild motor top end Sept 2012 - Parked and slowly working on it. Aug 2013 - Front end bagged - finally! Aug 2014 - Stepside swap conversion done. Finally ready to start bodywork! Have a few KEWL ideas... Here is my build thread: http://www.67-72chevytrucks.com/vboa...d.php?t=335427

07-09-2008, 07:13 AM	#3
heyjoe Registered User Join Date: Apr 2003 Location: New Orleans area Posts: 198	Re: Eaton 4.10 center section AZ $20 How did I miss this? __________________ '67 C20 small window Fleetside - 250 inline 6 - 3 on the tree - heavy duty clutch, brakes, rear springs - 17.5 wheels w/bias ply tires - AM radio - heater.

07-22-2008, 01:15 AM	#4
64c20crewcab Registered User Join Date: Jun 2008 Location: North SD County Posts: 631	Re: Eaton 4.10 center section AZ $20 Tom, It arrived today. Thanks Much! Plan to clean it up and install b4 summer is over. Thanks again!! HeyJoe - Sorry Bro! __________________ ..............................._________ ......___________//___[[___{\ _____ ...../__(_(O)_)___/____/____/_(O)_/ 1964 C20 Long Stepside 3 Door Crew Cab - Armbruster-Stageway Conversion Y2K INDN Chief "ONE OF A KIND, NOT ONE OF THE CROWD" Aug 2010 - Front end frame cleanup & engine swap done!!! June 2011 - Rear end bagged Sept 2011 - Rebuild motor top end Sept 2012 - Parked and slowly working on it. Aug 2013 - Front end bagged - finally! Aug 2014 - Stepside swap conversion done. Finally ready to start bodywork! Have a few KEWL ideas... Here is my build thread: http://www.67-72chevytrucks.com/vboa...d.php?t=335427

07-22-2008, 07:41 AM	#5
heyjoe Registered User Join Date: Apr 2003 Location: New Orleans area Posts: 198	Re: Eaton 4.10 center section AZ $20 Thanks for the condolences - sniff, sniff... How about sharing the story on the shipping with us who are still looking for a center section. How was it packaged, what shipper was used, weight, any tips? Enquiring minds want to know.

07-22-2008, 10:30 AM	#6
64c20crewcab Registered User Join Date: Jun 2008 Location: North SD County Posts: 631	Re: Eaton 4.10 center section AZ $20 Shipping from Meza AZ to Alhambra CA - $60 via DHL ground Weight - 108lbs total Here is a pic of the packaging. Milk crate w/t box formed around it and unit is then secured to the milk crate with tie wraps - these broke so maybe use chicken wire but it arrived to me without issue. I found the packaging method on this board. Also here is a thread I started that lead me to this find. Will be posting more to it by Wednsday. Check it out: 'Eaton H052 - Drop Out Pumpkin Swap?' Attached Images __________________ ..............................._________ ......___________//___[[___{\ _____ ...../__(_(O)_)___/____/____/_(O)_/ 1964 C20 Long Stepside 3 Door Crew Cab - Armbruster-Stageway Conversion Y2K INDN Chief "ONE OF A KIND, NOT ONE OF THE CROWD" Aug 2010 - Front end frame cleanup & engine swap done!!! June 2011 - Rear end bagged Sept 2011 - Rebuild motor top end Sept 2012 - Parked and slowly working on it. Aug 2013 - Front end bagged - finally! Aug 2014 - Stepside swap conversion done. Finally ready to start bodywork! Have a few KEWL ideas... Here is my build thread: http://www.67-72chevytrucks.com/vboa...d.php?t=335427

07-22-2008, 09:59 PM	#7
heyjoe Registered User Join Date: Apr 2003 Location: New Orleans area Posts: 198	Re: Eaton 4.10 center section AZ $20 Yes, I have been following that thread. Many thanks for posting the shipping info, appreciate the photo - very helpfull.

07-23-2008, 02:19 AM	#8
t korinek Truckin' Krazy Join Date: May 2000 Location: mesa az Posts: 6,193	Re: Eaton 4.10 center section AZ $20 Those were some heavy duty tie wraps, next time baling wire should do it. I'm glad it didn't break out of the crate. DHL was the only one who would ship something that heavy to a residence. I may have another one of these soon, probably won't be $20 though. __________________ Dealer for: American Auto Wire Precision weatherstripping Dakota Digital Trim parts Carpets Truck World seat covers & Many others Chevy Parts locator in Mesa AZ!

07-23-2008, 04:11 PM	#10
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	Re: Eaton 4.10 center section AZ $20 that is exactly how I ship them, shipped 2 or 3 now. I used the big fat zip ties, like 5 or 6 of them, and they never popped.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.