A little help with heads.... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Zoerb · 07-09-2008, 03:58 AM

Ok, I have 3 sets of heads, all different castings, and I want to figure out what would be worth it to use. first the engine is a 350 4 bolt, cam will be a little more than stock (havent selected one yet), edelbrock performer intake and 1406 carb. this is going in a 72 c10 with a th350 and 3.08 posi.

Basicly all that being said, heres the cast numbers:

3932441
3998993 (made in mexico)
333882

yes I know everyones view on vortec heads and aftermarket heads. I have a VERY small budget for this build, and I need to use what I have. the truck is not going to be a power house, it will be a summertime daily driver.

Thanks for all your help in advance!!

chevychase · 07-09-2008, 04:52 AM

On a budget, they are exactly in the order that "I" would choose them, being the 441's first. The 993's and 441's are a similar head. There's a lot of hype of the 882's prone to cracking when they get too hot, but others have had good luck.

You can also check mortec.com for a little more info on the heads.

Just my $.02 though, I'm interested to hear others comments or recommendations.

**1970 CST Short Wide** · 07-09-2008, 09:56 AM

I would go with the 441's

**88JRFAN** · 07-09-2008, 10:47 AM

I would go with the 993 heads. That is to be the best pair of stock heads. On our dirt race cars, that can only use certain stock heads, those are to be the best ones.

Zoerb · 07-09-2008, 02:35 PM

Thanks guys, I think I'll start tearing down the 441's and go from there.

07-09-2008, 03:58 AM	#1
Zoerb Registered User Join Date: Dec 2005 Location: Wasilla Alaska Posts: 73	A little help with heads.... Ok, I have 3 sets of heads, all different castings, and I want to figure out what would be worth it to use. first the engine is a 350 4 bolt, cam will be a little more than stock (havent selected one yet), edelbrock performer intake and 1406 carb. this is going in a 72 c10 with a th350 and 3.08 posi. Basicly all that being said, heres the cast numbers: 3932441 3998993 (made in mexico) 333882 yes I know everyones view on vortec heads and aftermarket heads. I have a VERY small budget for this build, and I need to use what I have. the truck is not going to be a power house, it will be a summertime daily driver. Thanks for all your help in advance!! __________________ 2017 Tahoe Premier - Daily '99 Silverado 2500 Wife's whip- 2020 Equinox Premier Last edited by Zoerb; 07-09-2008 at 04:13 AM.

07-09-2008, 04:52 AM	#2
chevychase Registered User Join Date: Jun 2007 Location: Boca Raton, FL Posts: 476	Re: A little help with heads.... On a budget, they are exactly in the order that "I" would choose them, being the 441's first. The 993's and 441's are a similar head. There's a lot of hype of the 882's prone to cracking when they get too hot, but others have had good luck. You can also check mortec.com for a little more info on the heads. Just my $.02 though, I'm interested to hear others comments or recommendations. Last edited by chevychase; 07-09-2008 at 05:07 AM.

07-09-2008, 09:56 AM	#3
1970 CST Short Wide Senior Moment Join Date: Mar 2002 Location: Pittsburg Ca Posts: 4,193	Re: A little help with heads.... I would go with the 441's __________________ 1970 CST LS 1 6 speed Ford 9 inch Detroit Tru Track, Dakota Didgital, Vintage Air, QA1 Coil Overs Front & Rear Lots of FUN 2013 GMC PU, Oldest Son 71 GMC LWB. QA1 Suspension, Angry SB. Youngest Son 2017 Toyota SUV Daughters car 2018 Traverse , Wife’s Ride Pittsburg Ca 94565

07-09-2008, 10:47 AM	#4
88JRFAN LET'S GO RACIN' Join Date: Oct 2007 Location: SALINA,KS Posts: 1,212	Re: A little help with heads.... I would go with the 993 heads. That is to be the best pair of stock heads. On our dirt race cars, that can only use certain stock heads, those are to be the best ones. __________________ Daren 04 Chevy Extend cab 2500HD 6.0 Liter 4x4 71 CHEVY 3/4 4X4 402 BB, th400/np205, dana44/eaton ho52 w/4:10-TOY Rip El Jay RIP BOBBO'S MOM Last edited by 88JRFAN; 07-09-2008 at 10:47 AM.

07-09-2008, 02:35 PM	#5
Zoerb Registered User Join Date: Dec 2005 Location: Wasilla Alaska Posts: 73	Re: A little help with heads.... Thanks guys, I think I'll start tearing down the 441's and go from there. __________________ 2017 Tahoe Premier - Daily '99 Silverado 2500 Wife's whip- 2020 Equinox Premier



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.