Engine Detailed - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**DREW67** · 07-16-2008, 08:14 AM

Got my engine back from getting detailed thought I share some pictures. This will be going into the 67 GMC this weekend I hope.

lowriden58 · 07-16-2008, 08:27 AM

looks good!

Luvlegs · 07-16-2008, 08:49 AM

that just looks nice... nice... nice...

*ksjh1316* · 07-16-2008, 08:53 AM

Thats is going to look great in your ride. You should be close to done on her aren't you?

**Yukon Jack** · 07-16-2008, 10:30 AM

Can't wait to see it installed!

**DREW67** · 07-16-2008, 10:41 AM

No still got a little to do but the engine is the last of the real big ticket items.

jorgensensc · 07-16-2008, 10:53 AM

Looks great!! I'm not being an a$$, so don't take this wrong. You sent it out to get detailed? What do they do when they detail an engine? Is it something that a hobbiest like us couldn't do? How do you even go about finding an engine detailer? How much does something like that cost ? Again, it looks really good, and I'm not knocking any of your abilities. I've just never heard of sending out an engine to get detailed and I am curious about it.
Shawn

67CHIP72 · 07-16-2008, 11:07 AM

Looks great! Where did you take it?

babyJay · 07-16-2008, 11:14 AM

That's sharp!

**DREW67** · 07-16-2008, 11:39 AM

jorgensensc, No problem I do not have alot time to work on my truck and detail the engine. So I employeed a guy here in town that works on hot rods and he does alot of different things and one them is detailing engines when he did this he replaced seals, gaskets, water pump, timechain etc. Sense this was a low mileage engine he did not see it needing a rebuild. So he just refreshed the engine and tranny. $475 to me it was well worth it now all I have to do is drop it in.

jorgensensc · 07-16-2008, 01:55 PM

Ahh okay. Now I understand!! I thought you meant that someone cleaned and painted it for you, made it look pretty so to speak. Now I get it. Sure I could definitely see having someone replace all the seals and button it back up for you nice and neat if you don't have the time. Makes perfect sense now. Great looking engine again!
Shawn

72BlckButy · 07-16-2008, 02:27 PM

OMG... that is beautiful!!!

Now the tough decision, which truck are you going to bring to Riverside in September...

Any pics of the GMC? If the motor looks like this, I can only imagine what the truck will look like.

*Billla* · 07-16-2008, 03:28 PM

That looks great!

What products did you use? All Eastwood stuff?

Ace in the hole · 07-16-2008, 03:34 PM

that's pretty darn nice lookin

**SactoJim** · 07-16-2008, 03:54 PM

Nothing like a freshly detailed big block.....looks real good.

tcb-1 · 07-16-2008, 04:02 PM

Nice Andrew!!! I love seeing a factory stock engines. If you need any help putting it in the '67, pm me!!

Wrenchbender Ret · 07-16-2008, 04:25 PM

I hope you bring it to the All Truck Nationals in Riverside Like Buty mentioned. It will look good there.

**DREW67** · 07-18-2008, 03:16 PM

Doug I might have to take you up on that one.

**Joesjunk** · 07-18-2008, 05:20 PM

Looks great Andrew!!!!

longhorn70gmc · 07-18-2008, 05:43 PM

That is really nice!!!!

Chevyman680063 · 07-18-2008, 06:10 PM

That is beautiful. I like what Chip Foose says about how the front of a vehicle is the jewelry box and the engine is the diamond ring inside.

**72ironmike** · 07-19-2008, 08:55 PM

Andrew, That is super!

**FRENCHBLUE72** · 07-19-2008, 11:36 PM

Very nice....

HOTFUN · 07-22-2008, 01:31 PM

Looks GREAT Andrew. I see you lost the original air pump set up and plugged the exhaust ports. The air pump set up probably paid for the spruce up. Thanks for the heads up I missed this post. Mark

OrangeCrush1970 · 07-22-2008, 01:47 PM

Sweet! Is that a 327? Also, what type of headers / ex. manifolds are those?

07-16-2008, 08:14 AM	#1
DREW67 Senior Member Join Date: Aug 2001 Location: Kansas City, Mo Posts: 1,030	Engine Detailed Got my engine back from getting detailed thought I share some pictures. This will be going into the 67 GMC this weekend I hope. Attached Images __________________ DREW67 Last edited by DREW67; 07-16-2008 at 08:19 AM.

07-16-2008, 08:27 AM	#2
lowriden58 Registered User Join Date: Jan 2008 Location: Chesapeake Beach, MD Posts: 812	Re: Engine Detailed looks good! __________________ 71 cheyenne lwb 300rwhp best 1/4 time so far 12.8 @103 http://i195.photobucket.com/albums/z...en58/001-2.jpg

07-16-2008, 08:49 AM	#3
Luvlegs Registered User Join Date: Sep 2005 Location: Smith Mountain Lake Virginia Posts: 1,537	Re: Engine Detailed that just looks nice... nice... nice... __________________ "A cat will almost always blink when hit between the eyes with a ball peen hammer" (you don't always have to state the obvious) Wear your PPE! You can eat with false teeth but you can't see with a false eye. 1959 Studebaker Silverhawk 350/400 1972 C10 L6 3OTT 2005 F350 - Built - whew!

07-16-2008, 08:53 AM	#4
ksjh1316 Account Suspended Join Date: Jul 2007 Location: Wichita KS Posts: 1,599	Re: Engine Detailed Thats is going to look great in your ride. You should be close to done on her aren't you?

07-16-2008, 10:30 AM	#5
Yukon Jack Post Whore Join Date: Feb 2000 Location: Rose Hill, KS, USA Posts: 12,684	Re: Engine Detailed Can't wait to see it installed! __________________ 1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14

07-16-2008, 10:41 AM	#6
DREW67 Senior Member Join Date: Aug 2001 Location: Kansas City, Mo Posts: 1,030	Re: Engine Detailed No still got a little to do but the engine is the last of the real big ticket items. __________________ DREW67

07-16-2008, 10:53 AM	#7
jorgensensc Registered User Join Date: Jul 2003 Location: Cypress, Tx Posts: 4,005	Re: Engine Detailed Looks great!! I'm not being an a$$, so don't take this wrong. You sent it out to get detailed? What do they do when they detail an engine? Is it something that a hobbiest like us couldn't do? How do you even go about finding an engine detailer? How much does something like that cost ? Again, it looks really good, and I'm not knocking any of your abilities. I've just never heard of sending out an engine to get detailed and I am curious about it. Shawn __________________ 1972 C20 Suburban- Big Blue Betty '56 Chevy Bel Air Sedan- Frame up Restoration -What would you attempt to achieve if you knew you could not fail?- -I Refuse To Tiptoe Through Life, Only To Arrive Safely At Death's Door- R.I.P. EAST SIDE LOW LIFE

07-16-2008, 11:07 AM	#8
67CHIP72 STOLEN Join Date: Jun 2006 Location: Orange County Posts: 1,022	Re: Engine Detailed Looks great! Where did you take it? __________________ In Search Of

07-16-2008, 11:14 AM	#9
babyJay Arrived on a Pale Horse Join Date: Mar 2007 Location: SnagTown Indiana Posts: 2,524	Re: Engine Detailed That's sharp! __________________ Jason 87 V30 350TBI/400 White w/Boss V-plow 89 R3500 CC SRW

07-16-2008, 11:39 AM	#10
DREW67 Senior Member Join Date: Aug 2001 Location: Kansas City, Mo Posts: 1,030	Re: Engine Detailed jorgensensc, No problem I do not have alot time to work on my truck and detail the engine. So I employeed a guy here in town that works on hot rods and he does alot of different things and one them is detailing engines when he did this he replaced seals, gaskets, water pump, timechain etc. Sense this was a low mileage engine he did not see it needing a rebuild. So he just refreshed the engine and tranny. $475 to me it was well worth it now all I have to do is drop it in. __________________ DREW67

07-16-2008, 01:55 PM	#11
jorgensensc Registered User Join Date: Jul 2003 Location: Cypress, Tx Posts: 4,005	Re: Engine Detailed Ahh okay. Now I understand!! I thought you meant that someone cleaned and painted it for you, made it look pretty so to speak. Now I get it. Sure I could definitely see having someone replace all the seals and button it back up for you nice and neat if you don't have the time. Makes perfect sense now. Great looking engine again! Shawn __________________ 1972 C20 Suburban- Big Blue Betty '56 Chevy Bel Air Sedan- Frame up Restoration -What would you attempt to achieve if you knew you could not fail?- -I Refuse To Tiptoe Through Life, Only To Arrive Safely At Death's Door- R.I.P. EAST SIDE LOW LIFE

07-16-2008, 02:27 PM	#12
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: Engine Detailed OMG... that is beautiful!!! Now the tough decision, which truck are you going to bring to Riverside in September... Any pics of the GMC? If the motor looks like this, I can only imagine what the truck will look like. __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package) Last edited by 72BlckButy; 07-16-2008 at 02:28 PM.

07-16-2008, 03:28 PM	#13
Billla Account Suspended Join Date: Sep 2005 Location: Monroe, WA Posts: 3,815	Re: Engine Detailed That looks great! What products did you use? All Eastwood stuff?

07-16-2008, 03:34 PM	#14
Ace in the hole Registered User Join Date: Apr 2007 Location: Kalamazoo, Michigan, USA Posts: 538	Re: Engine Detailed that's pretty darn nice lookin __________________ 1970 K20, 350--- SOLD 05 silverado extended cab short box- duramax Jeep wrangler unlimited

07-16-2008, 03:54 PM	#15
SactoJim Registered User Join Date: Oct 2005 Location: Sacramento, CA Posts: 1,970	Re: Engine Detailed Nothing like a freshly detailed big block.....looks real good. __________________ 72 Cheyenne SWB Fleet Nut & bolt frame off in progress...99.9999% - supercharged 383 - 4 wheel discs - relocated fuel tank - My Build Thread



Register or Log In To remove these advertisements.

07-16-2008, 04:02 PM	#16
tcb-1 Nothing to see here..... Join Date: Jun 2007 Location: Shawnee, KS Posts: 4,625	Re: Engine Detailed Nice Andrew!!! I love seeing a factory stock engines. If you need any help putting it in the '67, pm me!! __________________ Doug THANK YOU to our American Soldiers & Veterans - POW MIA "You will NEVER be forgotten". The democracy will cease to exist when you take away from those who are willing to work and give to those who would not. Thomas Jefferson

07-16-2008, 04:25 PM	#17
Wrenchbender Ret Registered User Join Date: Oct 2005 Location: Overland Park, Ks. Posts: 5,207	Re: Engine Detailed I hope you bring it to the All Truck Nationals in Riverside Like Buty mentioned. It will look good there.

07-18-2008, 03:16 PM	#18
DREW67 Senior Member Join Date: Aug 2001 Location: Kansas City, Mo Posts: 1,030	Re: Engine Detailed Doug I might have to take you up on that one. __________________ DREW67

07-18-2008, 05:20 PM	#19
Joesjunk Senior Member Join Date: May 2001 Location: Independence MO. Posts: 7,691	Re: Engine Detailed Looks great Andrew!!!! __________________ 72 3/4t Custom Deluxe 402/auto 66k Original paint 71 3/4t 4x4 Custom Deluxe 10k original miles Original paint 71 3/4t Cheyenne 402 70k original paint 72 3/4t 4x4 Custom deluxe 72 3/4t 4x4 Custom deluxe 91k original paint 72 Cheyenne/30 Dually 69 Camaro SS396 4-speed 13 GMC 2500HD Duramax I bought new 05 Jeep Wrangler "Willys Edition" 12k miles (I bought new) 85 3/4 ton 4x4 Scottsdale 33k miles original paint 86 1 ton 4x4 SRW Silverado 454 restored 80 1 ton 4x4 SRW Silverado 9,434 original miles!! original paint 95 GMC 1 ton dually 4x4 my dad bought new 95 GMC 3/4 ton 4x4, regular cab 454, 31k original miles 2002 2500HD 4x4 regular cab 6.0L 67k miles 2002 2500HD 4x4 regular cab 8.1L 28k miles 2003 GMC 2500HD 4x4 regular cab Diesel 93k miles 67-72 Parts for sale

07-18-2008, 05:43 PM	#20
longhorn70gmc Senior Member Join Date: Feb 2001 Location: Ridgecrest. CA, USA Posts: 1,715	Re: Engine Detailed That is really nice!!!! __________________ Billy 1970 GMC Sierra Grande 402/TH400 (Longhorn)14 years and counting rebuild! 1975 (Build) Chevrolet SWB 4X4 350 SB Lifted 6 inches 1970 Ford F250 Ranger 390 BB 2010 Ford Super Duty F250 XLT W/4 inch lift kit and Pro Comp Tires Hub Cap Freak! *I need another truck like I need another hole in the head!* I'M IN THE MARKET...AS IT WERE!

07-18-2008, 06:10 PM	#21
Chevyman680063 Registered User Join Date: Aug 2006 Location: Georgia Posts: 850	Re: Engine Detailed That is beautiful. I like what Chip Foose says about how the front of a vehicle is the jewelry box and the engine is the diamond ring inside.

07-19-2008, 08:55 PM	#22
72ironmike Senior Member Join Date: Jan 2004 Location: Olathe KS (Greater Kansas City MO Area) Posts: 2,054	Re: Engine Detailed Andrew, That is super!

07-19-2008, 11:36 PM	#23
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,604	Re: Engine Detailed Very nice.... __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

07-22-2008, 01:31 PM	#24
HOTFUN Registered User Join Date: Jan 2001 Location: Lincoln, Nebraska Posts: 2,145	Re: Engine Detailed Looks GREAT Andrew. I see you lost the original air pump set up and plugged the exhaust ports. The air pump set up probably paid for the spruce up. Thanks for the heads up I missed this post. Mark __________________ '66 CST BBW swb fleet 327 fac ac '67 CST 4x4 swb 327 stepside project '72 Cheyenne K20 50k original '72 Cheyenne Super K20 project '73 Sierra swb 4x4 frame off in paint stage '74 Cheyenne Super swb w/16k actual '71 & 72 Cheyenne K10 4x4 swb's '70 426 HEMICUDA conv SHAKER 4 sp Dana 60 '60 Impala conv 327 PG fac ac loaded 3rd owner '72 GMC K2500 4x4 '59 Apache CST BBW fleetside swb 283 '73 ElCamino SS LS1 T56 true SS bucket tach '76 ElCamino SS 52k survivor '87 Grand National 41k True 2nd to last built in 1987. '86 K30 454 SRW fleetside CA since new '88 Trans Am GTA 39k bought new 2018 DEMON plum crazy @ 840HP! "Need for speed"

07-22-2008, 01:47 PM	#25
OrangeCrush1970 Registered User Join Date: Jun 2007 Location: Smyrna, GA Posts: 709	Re: Engine Detailed Sweet! Is that a 327? Also, what type of headers / ex. manifolds are those? __________________ *Rottenwood Garage* 1970...71...72 C1500 aka Orange aka Sideshow Bob 540 BB Straub Roller Cam, AFR Magnums, XP 950, TKO 600 2 Tons of Fun Last edited by OrangeCrush1970; 07-22-2008 at 01:49 PM.

Register or Log In To remove these advertisements.