Baggin My 67 SWB - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Take2 · 07-20-2008, 05:35 PM

Well Started the Airride on the 67.....

Front is Completed...still need to find some headers that will work the long tubes hang too low......and my shortys are hitting the motor mounts

When my Boyd Harms come in it will complete the look..... The picture of the tire all the way up in the fender is not how it sits now....we got about 2 more inches out of the front....

Also had to pull out the rear crossmember....thats a job with the cab on...but we got it out

Tubular Uppers and Lowers

Cut a god bit out of the top of the fender for a few more inches....plus these tires are huge compared to the new wheels

Can you say Notch !!!

Take2 · 07-20-2008, 05:38 PM

Crossmember ......

Should be putting the new Crossmember in tomorrow ....Will Take more pics as we do more work...

Thanks Steve and Jeff you guys busted ass !!!!!

*project 67 sub* · 07-20-2008, 05:42 PM

looking good

98L150 · 07-20-2008, 09:16 PM

nice pics jason. looking good

SCOTI · 07-20-2008, 09:25 PM

What rear suspension will you be using?

68 short step · 07-20-2008, 11:53 PM

how in the world did you get that out without taking the cab off?

Take2 · 07-21-2008, 05:33 AM

Quote:

Originally Posted by SCOTI

What rear suspension will you be using?

We are using the stock trailing arms for now with blocks and new panhard...

Quote:

Originally Posted by 68 short step

how in the world did you get that out without taking the cab off?

My buddy Chris a small grinder and cutoff wheel....He ground the heads off the rivets and then beat on for awhile...

Take2 · 07-21-2008, 07:00 AM

Quote:

Originally Posted by 98L150

nice pics jason. looking good

Thanks Jeff....Going to work on it a bit today so we dont have s much to do Sat.

98L150 · 07-21-2008, 10:03 PM

Jason,

here are a few of the pics off of my camera from saturday

SCOTI · 07-21-2008, 10:16 PM

Quote:

Originally Posted by Take2

My buddy Chris a small grinder and cutoff wheel....He ground the heads off the rivets and then beat on for awhile...

Uhmmm..... correct me if I'm wrong but any friend that would get under there & do that job is more than just a buddy

.

72BlckButy · 07-21-2008, 10:34 PM

Great build!

Take2 · 07-23-2008, 08:05 PM

Update:

Went and Picked my front wheels up today just to make sure I didnt have any issues when it was all the way down....

Also Installed the new fuel tank and panhard....got all the air managment mounted and ready for install....Installed the new Crossmember monday added pics of that too

Getting close guys

PICS

Take2 · 07-23-2008, 08:06 PM

Riveted1 · 07-23-2008, 09:02 PM

I've always loved those Harms! They look awesome. Where are you putting your air management? In the bed?

Wootdog · 07-23-2008, 09:19 PM

Good build. Maybe that will get me motivated to finish mine. At this time I just have rear bags in that I am using like air shocks. My brother started this project and made it so I had to have rear bags at least. It had the cups welded in on the rear and the rear coils wouldn't work anymore. I just air the rear bags up like you would air shocks. Works for now.
Kerry

**lolife99** · 07-23-2008, 10:32 PM

Cool truck. What's the specs on the wheels and tires?

randomhero472 · 07-24-2008, 12:30 AM

where did you mount your valve manifold? And just my opinion, but your going to be way UNDER compressored with 10 gallons of air. Also you running drop spindles? and any clearence issues w/the 20's... LOOKS GREAT! MORE PICS

*paisaloco67* · 07-24-2008, 02:54 AM

Nice work! That is a bad a** burb shown in one of the pics...do you have
any more pics of it? Nice bling blings by the way!

98L150 · 07-24-2008, 10:19 AM

looking good jason, can't wait to see this thing done on saturday

paisaloco67, that is my burb in the back ground pics. you can see more pics of it at:

http://www.hubgarage.com/mygarage/RA_Jeff

Take2 · 07-24-2008, 11:26 AM

Quote:

Originally Posted by lolife99

Cool truck. What's the specs on the wheels and tires?

Not sure on the offset but they are 20 x 8.5 on the front with 22 x 10 on the rear...Buddy of ours ordered them and i never thought to ask what backspacing...

Take2 · 07-24-2008, 11:31 AM

Quote:

Originally Posted by randomhero472

where did you mount your valve manifold? And just my opinion, but your going to be way UNDER compressored with 10 gallons of air. Also you running drop spindles? and any clearence issues w/the 20's... LOOKS GREAT! MORE PICS

Its mounted on the board with everyting else going in the bed....Truck has a bed cover

Yeh if I need another compressor I can add it later...

Yes I am running spindels....no issues at all ...

Thanks man I will snap a few more pics today

ChevyDude · 07-25-2008, 08:50 AM

Nice truck, great build. I am bagging my 68' your thread gives me motivation!!! Keep up the good work!

*paisaloco67* · 07-25-2008, 02:34 PM

Quote:

Originally Posted by 98L150

looking good jason, can't wait to see this thing done on saturday

paisaloco67, that is my burb in the back ground pics. you can see more pics of it at:

http://www.hubgarage.com/mygarage/RA_Jeff

Thanks a lot, and again, congratulations.. u have a killer burb. Im a real
fan of those big boats, one day mine will kinda look like yours...

98L150 · 07-27-2008, 01:34 AM

jason,

here are some of my pics from saturday. now if thse new weels would ever get here. lol

Frizzle Fry · 07-27-2008, 06:10 AM

Looking good! What wheels are you going with?

07-20-2008, 05:35 PM	#1
Take2 Registered User Join Date: Jun 2008 Location: Spring Posts: 43	Baggin My 67 SWB Well Started the Airride on the 67..... Front is Completed...still need to find some headers that will work the long tubes hang too low......and my shortys are hitting the motor mounts When my Boyd Harms come in it will complete the look..... The picture of the tire all the way up in the fender is not how it sits now....we got about 2 more inches out of the front.... Also had to pull out the rear crossmember....thats a job with the cab on...but we got it out Tubular Uppers and Lowers Cut a god bit out of the top of the fender for a few more inches....plus these tires are huge compared to the new wheels Can you say Notch !!!

07-20-2008, 05:38 PM	#2
Take2 Registered User Join Date: Jun 2008 Location: Spring Posts: 43	Re: Baggin My 67 SWB Crossmember ...... Should be putting the new Crossmember in tomorrow ....Will Take more pics as we do more work... Thanks Steve and Jeff you guys busted ass !!!!!

07-20-2008, 05:42 PM	#3
project 67 sub Account Suspended Join Date: Mar 2007 Location: san bernardino ca. everywhere Posts: 3,938	Re: Baggin My 67 SWB looking good

07-20-2008, 09:16 PM	#4
98L150 ///Relaxed Atmosphere Join Date: Apr 2003 Location: Hockley, TX Posts: 657	Re: Baggin My 67 SWB nice pics jason. looking good __________________ 72 Suburban 64 Chevy short fleet 04 Chevy Colorado Sport Reg Cab 2012 Chevy Avalanche 2003 Chevy S10 Blazer Xtreme http://www.hubgarage.com/mygarage/RA_Jeff 64 Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=295915

07-20-2008, 09:25 PM	#5
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 22,068	Re: Baggin My 67 SWB What rear suspension will you be using? __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

07-20-2008, 11:53 PM	#6
68 short step Senior Member Join Date: Aug 2005 Location: tulsa OK Posts: 3,070	Re: Baggin My 67 SWB how in the world did you get that out without taking the cab off?

07-21-2008, 10:03 PM	#9
98L150 ///Relaxed Atmosphere Join Date: Apr 2003 Location: Hockley, TX Posts: 657	Re: Baggin My 67 SWB Jason, here are a few of the pics off of my camera from saturday Attached Images __________________ 72 Suburban 64 Chevy short fleet 04 Chevy Colorado Sport Reg Cab 2012 Chevy Avalanche 2003 Chevy S10 Blazer Xtreme http://www.hubgarage.com/mygarage/RA_Jeff 64 Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=295915

07-21-2008, 10:34 PM	#11
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: Baggin My 67 SWB Great build! __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)

07-23-2008, 08:05 PM	#12
Take2 Registered User Join Date: Jun 2008 Location: Spring Posts: 43	Re: Baggin My 67 SWB Update: Went and Picked my front wheels up today just to make sure I didnt have any issues when it was all the way down.... Also Installed the new fuel tank and panhard....got all the air managment mounted and ready for install....Installed the new Crossmember monday added pics of that too Getting close guys PICS

07-23-2008, 08:06 PM	#13
Take2 Registered User Join Date: Jun 2008 Location: Spring Posts: 43	Re: Baggin My 67 SWB

07-23-2008, 09:02 PM	#14
Riveted1 Tasty Cakes! Join Date: Apr 2003 Location: Gilbert, AZ Posts: 2,112	Re: Baggin My 67 SWB I've always loved those Harms! They look awesome. Where are you putting your air management? In the bed? __________________ I'm a little and a lot Ground beef: A cow with no legs. ---------------- '66 Chevy SWB "Penny" '67 Chevy Big Window SWB- aka "Pearl" '72 Burb- "Betty" "It's not a hearse dammit" '99 Chevy Ext. cab Silverado

07-23-2008, 09:19 PM	#15
Wootdog Senior Member Join Date: Jan 2001 Location: Virginia Beach, Va, USA Posts: 1,682	Re: Baggin My 67 SWB Good build. Maybe that will get me motivated to finish mine. At this time I just have rear bags in that I am using like air shocks. My brother started this project and made it so I had to have rear bags at least. It had the cups welded in on the rear and the rear coils wouldn't work anymore. I just air the rear bags up like you would air shocks. Works for now. Kerry __________________ 1967 C10 Got it back after three years Boy I sure missed Peppy 1969 Chevelle 1990 IROC Z Convertible 2002 Silverado LT

07-23-2008, 10:32 PM	#16
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,701	Re: Baggin My 67 SWB Cool truck. What's the specs on the wheels and tires? __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

07-24-2008, 12:30 AM	#17
randomhero472 Registered User Join Date: Feb 2006 Location: oklahoma Posts: 516	Re: Baggin My 67 SWB where did you mount your valve manifold? And just my opinion, but your going to be way UNDER compressored with 10 gallons of air. Also you running drop spindles? and any clearence issues w/the 20's... LOOKS GREAT! MORE PICS __________________ 67' in the "build" process.. soon to be bagged, big wheels ect, finally got it back home!!

07-24-2008, 02:54 AM	#18
paisaloco67 Account Suspended Join Date: Apr 2008 Location: redding CA Posts: 102	Re: Baggin My 67 SWB Nice work! That is a bad a** burb shown in one of the pics...do you have any more pics of it? Nice bling blings by the way!



Register or Log In To remove these advertisements.

07-24-2008, 10:19 AM	#19
98L150 ///Relaxed Atmosphere Join Date: Apr 2003 Location: Hockley, TX Posts: 657	Re: Baggin My 67 SWB looking good jason, can't wait to see this thing done on saturday paisaloco67, that is my burb in the back ground pics. you can see more pics of it at: http://www.hubgarage.com/mygarage/RA_Jeff __________________ 72 Suburban 64 Chevy short fleet 04 Chevy Colorado Sport Reg Cab 2012 Chevy Avalanche 2003 Chevy S10 Blazer Xtreme http://www.hubgarage.com/mygarage/RA_Jeff 64 Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=295915 Last edited by 98L150; 07-24-2008 at 10:19 AM. Reason: spelling

07-25-2008, 08:50 AM	#22
ChevyDude Senior Member Join Date: Jun 2003 Location: Westminster, CO Posts: 3,071	Re: Baggin My 67 SWB Nice truck, great build. I am bagging my 68' your thread gives me motivation!!! Keep up the good work! __________________ Alex 1971 Lil' Red 350 SBC 700R4

07-27-2008, 01:34 AM	#24
98L150 ///Relaxed Atmosphere Join Date: Apr 2003 Location: Hockley, TX Posts: 657	Re: Baggin My 67 SWB jason, here are some of my pics from saturday. now if thse new weels would ever get here. lol Attached Images __________________ 72 Suburban 64 Chevy short fleet 04 Chevy Colorado Sport Reg Cab 2012 Chevy Avalanche 2003 Chevy S10 Blazer Xtreme http://www.hubgarage.com/mygarage/RA_Jeff 64 Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=295915

07-27-2008, 06:10 AM	#25
Frizzle Fry Registered User Join Date: Aug 2005 Location: Hillsboro Oregon Posts: 6,449	Re: Baggin My 67 SWB Looking good! What wheels are you going with?

Register or Log In To remove these advertisements.