Parting '69 C10 LWB - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Musclerodz · 07-24-2008, 02:28 PM

Tired of storing this truck so it is going to the scrap yard less whatever I can sell off of it. Right fender and bedside are damaged. Left fender needs a cup. Inner fenders and core support junk. Left bedside looks good, bed floor is rusty but appears solid. Tailgate is junk. Post up any interest in parts and I will price them.

Redneck-Mafia · 07-24-2008, 02:35 PM

The thing that sucks about this is, your cab is in better condition than mine and it's bound to go to junk!

Ahhh! I hate that!

Hell, the windshield is even better!

Too bad Pops doesn't get my fascination with old trucks and old bikes. At least he's closer to you! Leflore county is....what, 3-4 hours away?
San Diego is....what, 2-3 days away?

BTW, checked out the LED light kits, awesome!

Luvlegs · 07-24-2008, 03:21 PM

what's the condition of the heat riser plate? Is the pipe still around too?
Just being cheap on this one but how's the clutch rod boot?
Cab corners? shifting arm?

RJGeister · 07-24-2008, 05:42 PM

Looking for a center belt in real good condition.

Rich

alfeefish · 07-24-2008, 07:17 PM

How much 4 the camaro?

Musclerodz · 07-25-2008, 01:07 AM

Quote:

Originally Posted by Redneck-Mafia

The thing that sucks about this is, your cab is in better condition than mine and it's bound to go to junk!

Ahhh! I hate that!

Hell, the windshield is even better!

Too bad Pops doesn't get my fascination with old trucks and old bikes. At least he's closer to you! Leflore county is....what, 3-4 hours away?
San Diego is....what, 2-3 days away?

BTW, checked out the LED light kits, awesome!

This is a very rust free cab except for the cowl, which is shot. I hate to get rid of it but I have too much stuff laying around and the piles are growing.

Musclerodz · 07-25-2008, 01:08 AM

Quote:

Originally Posted by Luvlegs

what's the condition of the heat riser plate? Is the pipe still around too?
Just being cheap on this one but how's the clutch rod boot?
Cab corners? shifting arm?

I will check

Musclerodz · 07-25-2008, 01:09 AM

Quote:

Originally Posted by RJGeister

Looking for a center belt in real good condition.

Rich

seat belt?

Musclerodz · 07-25-2008, 01:10 AM

Quote:

Originally Posted by alfeefish

How much 4 the camaro?

It is a 69 Firebird and not for sale. It is junk and parts for another. It too will be scrapped eventually

Mister laugh · 07-25-2008, 02:00 AM

How much for the exhaust manifold shipped to Edmonton, Alberta?

Musclerodz · 07-25-2008, 09:23 AM

Quote:

Originally Posted by Luvlegs

what's the condition of the heat riser plate? Is the pipe still around too?
Just being cheap on this one but how's the clutch rod boot?
Cab corners? shifting arm?

Riser plate looks good, $15 shipped
pipe is gone,
boot no good,
shift arm chrome is pitted

Musclerodz · 07-25-2008, 09:23 AM

Quote:

Originally Posted by Mister laugh

How much for the exhaust manifold shipped to Edmonton, Alberta?

$75 shipped to Canada.

jayharrell · 07-25-2008, 12:44 PM

How much for the Radio Knobs, just the tune and volume knobs to 78612.

Thanks

RJGeister · 07-25-2008, 01:13 PM

Quote:

Originally Posted by Musclerodz

seat belt?

Yes, a center seat belt please!

Musclerodz · 07-25-2008, 06:42 PM

Quote:

Originally Posted by jayharrell

How much for the Radio Knobs, just the tune and volume knobs to 78612.

Thanks

$15 shipped. I have an equal quality set already off a radio

**oldgold70c10** · 07-25-2008, 07:57 PM

What kind of shape is the passenger side door bottom in? Rust on side just surface?

jayharrell · 07-25-2008, 08:37 PM

i'll take the knobs, PM paypal info if you can. Thanks.

mrdurden · 07-25-2008, 08:38 PM

Does it have a one piece or two piece driveshaft?

Musclerodz · 07-25-2008, 10:39 PM

Quote:

Originally Posted by oldgold70c10

What kind of shape is the passenger side door bottom in? Rust on side just surface?

I will check tommorrow in the daylight and let you know

Musclerodz · 07-25-2008, 10:39 PM

Quote:

Originally Posted by mrdurden

Does it have a one piece or two piece driveshaft?

Don't know I will have to look

soala70 · 07-26-2008, 12:08 AM

would you sale and ship the radiator surport? alabama 36330

Musclerodz · 07-26-2008, 01:57 PM

Quote:

Originally Posted by soala70

would you sale and ship the radiator surport? alabama 36330

It is junk but I have another from a 69 I will have to check

Musclerodz · 07-26-2008, 08:31 PM

Quote:

Originally Posted by oldgold70c10

What kind of shape is the passenger side door bottom in? Rust on side just surface?

Door has one spot of rot about quarter size on the outside and some pinholes on the inner structure. Not the worst I have seen by far.

RJGeister · 07-27-2008, 09:35 PM

Quote:

Originally Posted by RJGeister

Yes, a center seat belt please!

Any word on the center seat belt?

Thanks,
Rich

Musclerodz · 07-28-2008, 11:11 AM

Quote:

Originally Posted by RJGeister

Any word on the center seat belt?

Thanks,
Rich

No good, been chewed on.

07-24-2008, 02:28 PM	#1
Musclerodz Senior Member Join Date: Aug 2005 Location: OKC, OK Posts: 2,365	Parting '69 C10 LWB Tired of storing this truck so it is going to the scrap yard less whatever I can sell off of it. Right fender and bedside are damaged. Left fender needs a cup. Inner fenders and core support junk. Left bedside looks good, bed floor is rusty but appears solid. Tailgate is junk. Post up any interest in parts and I will price them. Attached Images __________________ Mike Redpath Last edited by Musclerodz; 07-24-2008 at 02:29 PM.

07-24-2008, 02:35 PM	#2
Redneck-Mafia Registered User Join Date: Jan 2008 Location: SoCal Posts: 74	Re: Parting '69 C10 LWB The thing that sucks about this is, your cab is in better condition than mine and it's bound to go to junk! Ahhh! I hate that! Hell, the windshield is even better! Too bad Pops doesn't get my fascination with old trucks and old bikes. At least he's closer to you! Leflore county is....what, 3-4 hours away? San Diego is....what, 2-3 days away? BTW, checked out the LED light kits, awesome! __________________ Dave in Socal 69 Chevy C10 42 BSA WM20 47 Harley WL

07-24-2008, 03:21 PM	#3
Luvlegs Registered User Join Date: Sep 2005 Location: Smith Mountain Lake Virginia Posts: 1,537	Re: Parting '69 C10 LWB what's the condition of the heat riser plate? Is the pipe still around too? Just being cheap on this one but how's the clutch rod boot? Cab corners? shifting arm? __________________ "A cat will almost always blink when hit between the eyes with a ball peen hammer" (you don't always have to state the obvious) Wear your PPE! You can eat with false teeth but you can't see with a false eye. 1959 Studebaker Silverhawk 350/400 1972 C10 L6 3OTT 2005 F350 - Built - whew! Last edited by Luvlegs; 07-24-2008 at 03:26 PM.

07-24-2008, 05:42 PM	#4
RJGeister Retired Air Force 87-09 Join Date: Feb 2007 Location: Bonaire, Georgia 31005 Posts: 284	Re: Parting '69 C10 LWB Looking for a center belt in real good condition. Rich

07-24-2008, 07:17 PM	#5
alfeefish Registered User Join Date: Feb 2005 Location: Harrison TN Posts: 183	Re: Parting '69 C10 LWB How much 4 the camaro?

07-25-2008, 02:00 AM	#10
Mister laugh Registered User Join Date: Jun 2007 Location: Edmonton, Alberta Posts: 423	Re: Parting '69 C10 LWB How much for the exhaust manifold shipped to Edmonton, Alberta?

07-25-2008, 12:44 PM	#13
jayharrell Gettin By on Gettin By Join Date: Jan 2008 Location: Cedar Creek, Tx Posts: 1,033	Re: Parting '69 C10 LWB How much for the Radio Knobs, just the tune and volume knobs to 78612. Thanks __________________ 69 CST10 LWB 455 Buick 00 S10 2.2 Vin5 76 GL1000 Naked 1bl VW carb "Adios to all the concrete; Gonna get me some dirt road back streets"

07-25-2008, 07:57 PM	#16
oldgold70c10 Who's got steelies? Join Date: Feb 2006 Location: Morrison, Oklahoma Posts: 1,026	Re: Parting '69 C10 LWB What kind of shape is the passenger side door bottom in? Rust on side just surface? __________________ 1969 C10 LWB W/ 250 I6 & 3spd 1970 C10 with '67 small window cab, 68 front end, blue; 305/TH350, 3.08 limited slip rear end, manual brakes, power steering; & 4-wheel drums-My daily driver. 1975 Chevelle Malibu Classic Coupe 350/th350 mint green 1970 C20 Suburban 350/700R4 4.10 gearing green & white 1978 Big 10 Silverado 350/th350, working ac, 2 tone blue-My summer daily driver 1983 GMC 1500 Sierra 305/SM465 2.73 rear end How to add a trip odometer to your 67-72 stock speedometer How to rebuild your Q-Jet My Truck Page My Youtube Channel

07-25-2008, 08:37 PM	#17
jayharrell Gettin By on Gettin By Join Date: Jan 2008 Location: Cedar Creek, Tx Posts: 1,033	Re: Parting '69 C10 LWB i'll take the knobs, PM paypal info if you can. Thanks. __________________ 69 CST10 LWB 455 Buick 00 S10 2.2 Vin5 76 GL1000 Naked 1bl VW carb "Adios to all the concrete; Gonna get me some dirt road back streets"

07-25-2008, 08:38 PM	#18
mrdurden Registered User Join Date: Sep 2004 Location: Rio Rancho, NM Posts: 92	Re: Parting '69 C10 LWB Does it have a one piece or two piece driveshaft? __________________ '67 2wd LWB Fleetside '71 4wd LWB Fleetside

07-26-2008, 12:08 AM	#21
soala70 Registered User Join Date: Mar 2002 Location: geneva al usa Posts: 343	Re: Parting '69 C10 LWB would you sale and ship the radiator surport? alabama 36330 __________________ bogey5



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.