BBC heat shield DFW - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**clay68c10** · 07-30-2008, 08:56 PM

Selling a BBC heat shield, it has the screws. $20 local, $25 shipped. Paypal, MO, cash ok. Respond in thread only please.

**clay68c10** · 07-31-2008, 06:27 PM

ttt

**clay68c10** · 08-02-2008, 04:34 PM

bump

**clay68c10** · 08-03-2008, 06:38 PM

How about $20 shipped, $15 local?

**leddzepp** · 08-05-2008, 03:58 PM

Do you have a pic of this installed?

**clay68c10** · 08-05-2008, 06:11 PM

No, sorry no pic of it installed. It goes on the pass side, just to the right of the trans tunnel on the sloped part of the cab floor.

**Classic Bowties** · 08-05-2008, 06:54 PM

Quote:

Originally Posted by leddzepp

Do you have a pic of this installed?

Here is a pic. of one installed behind pass. side exhaust manifold/pipe.

**clay68c10** · 08-05-2008, 11:12 PM

Thanks for the pic. I should have snapped one before the parts truck went away.

**70cst** · 08-06-2008, 02:24 AM

I will take it (if it's avaliable and not spoken for) if you can wait a day or so. I want to find out the condition of mine. I have a 402BB in a 70 C10.

**clay68c10** · 08-06-2008, 09:43 AM

70cst:
Sure, I can do that. Let me know.

**70cst** · 08-06-2008, 08:54 PM

I will be looking at the truck this Friday afternoon so I will let you know Friday nite or Sat. Thanks.

**70cst** · 08-11-2008, 11:27 AM

Sold...PM sent.

**Classic Bowties** · 08-11-2008, 12:06 PM

Quote:

Originally Posted by 70cst

I will take it (if it's avaliable and not spoken for) if you can wait a day or so. I want to find out the condition of mine. I have a 402BB in a 70 C10.

Was watching this thread to confirm what I have found to date, I have come to believe that 71 402 trucks were the first to get these shields. Is your 70 cst an original bbc truck and if so did you find a heat shield present?

**clay68c10** · 08-11-2008, 02:37 PM

PM'd you back, sold.
I'm sure my 68 BBC truck didn't come with a heat shield.

**70cst** · 08-11-2008, 09:43 PM

Quote:

Originally Posted by Classic Bowties

Was watching this thread to confirm what I have found to date, I have come to believe that 71 402 trucks were the first to get these shields. Is your 70 cst an original bbc truck and if so did you find a heat shield present?

My truck came with the 402BB. It is my understanding that the heat shield was implored to keep some of the exhaust heat off the starter. When the starter was overly (?) heated the armature did funny things and it would not work properly until it cooled down. My truck had headers put on so I am not sure if it had a factory heat shield or not but I am going to install it for pm. I hope this resolves the starter problems of the past.

**Classic Bowties** · 08-11-2008, 09:57 PM

This type off heat shield is not going to help in keeping any heat off your starter.

**70cst** · 08-11-2008, 10:31 PM

Quote:

Originally Posted by Classic Bowties

This type off heat shield is not going to help in keeping any heat off your starter.

If not at least I'lll have a great Christmas Tree Ornament.

**leddzepp** · 08-11-2008, 11:11 PM

The shield is designed to keep the cab floor from getting too hot from the passenger side exhaust manifold. Using a high-torque mini starter will solve all of the problems associated with the stock starter.

**70cst** · 08-11-2008, 11:19 PM

Quote:

Originally Posted by leddzepp

The shield is designed to keep the cab floor from getting too hot from the passenger side exhaust manifold. Using a high-torque mini starter will solve all of the problems associated with the stock starter.

Thanks for the info.

**leddzepp** · 08-11-2008, 11:22 PM

No problem...the mini starter also gives you a lot more clearance if you are using headers instead of manifolds.

07-30-2008, 08:56 PM	#1
clay68c10 Senior Member Join Date: Aug 2004 Location: Centennial, CO Posts: 2,933	BBC heat shield DFW Selling a BBC heat shield, it has the screws. $20 local, $25 shipped. Paypal, MO, cash ok. Respond in thread only please. __________________ ClusterTruck: 68 C10 Bought in 89, wrecked in 03. Slow low $ rebuild started '17. 6.0 & TKO http://67-72chevytrucks.com/vboard/s...d.php?t=788602 93 K1500 Short Step, 350, NV4500, EBL flash ECU. Vortec heads & roller cam someday... 05 Jeep Wrangler Unlimited. 3” lift & 6-speed 02 E320 the insurance total “free car” 13 Tahoe LTZ

07-31-2008, 06:27 PM	#2
clay68c10 Senior Member Join Date: Aug 2004 Location: Centennial, CO Posts: 2,933	Re: BBC heat shield DFW ttt __________________ ClusterTruck: 68 C10 Bought in 89, wrecked in 03. Slow low $ rebuild started '17. 6.0 & TKO http://67-72chevytrucks.com/vboard/s...d.php?t=788602 93 K1500 Short Step, 350, NV4500, EBL flash ECU. Vortec heads & roller cam someday... 05 Jeep Wrangler Unlimited. 3” lift & 6-speed 02 E320 the insurance total “free car” 13 Tahoe LTZ

08-02-2008, 04:34 PM	#3
clay68c10 Senior Member Join Date: Aug 2004 Location: Centennial, CO Posts: 2,933	Re: BBC heat shield DFW bump __________________ ClusterTruck: 68 C10 Bought in 89, wrecked in 03. Slow low $ rebuild started '17. 6.0 & TKO http://67-72chevytrucks.com/vboard/s...d.php?t=788602 93 K1500 Short Step, 350, NV4500, EBL flash ECU. Vortec heads & roller cam someday... 05 Jeep Wrangler Unlimited. 3” lift & 6-speed 02 E320 the insurance total “free car” 13 Tahoe LTZ

08-03-2008, 06:38 PM	#4
clay68c10 Senior Member Join Date: Aug 2004 Location: Centennial, CO Posts: 2,933	Re: BBC heat shield DFW How about $20 shipped, $15 local? __________________ ClusterTruck: 68 C10 Bought in 89, wrecked in 03. Slow low $ rebuild started '17. 6.0 & TKO http://67-72chevytrucks.com/vboard/s...d.php?t=788602 93 K1500 Short Step, 350, NV4500, EBL flash ECU. Vortec heads & roller cam someday... 05 Jeep Wrangler Unlimited. 3” lift & 6-speed 02 E320 the insurance total “free car” 13 Tahoe LTZ

08-05-2008, 03:58 PM	#5
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 19,996	Re: BBC heat shield DFW Do you have a pic of this installed?

08-05-2008, 06:11 PM	#6
clay68c10 Senior Member Join Date: Aug 2004 Location: Centennial, CO Posts: 2,933	Re: BBC heat shield DFW No, sorry no pic of it installed. It goes on the pass side, just to the right of the trans tunnel on the sloped part of the cab floor. __________________ ClusterTruck: 68 C10 Bought in 89, wrecked in 03. Slow low $ rebuild started '17. 6.0 & TKO http://67-72chevytrucks.com/vboard/s...d.php?t=788602 93 K1500 Short Step, 350, NV4500, EBL flash ECU. Vortec heads & roller cam someday... 05 Jeep Wrangler Unlimited. 3” lift & 6-speed 02 E320 the insurance total “free car” 13 Tahoe LTZ

08-05-2008, 11:12 PM	#8
clay68c10 Senior Member Join Date: Aug 2004 Location: Centennial, CO Posts: 2,933	Re: BBC heat shield DFW Thanks for the pic. I should have snapped one before the parts truck went away. __________________ ClusterTruck: 68 C10 Bought in 89, wrecked in 03. Slow low $ rebuild started '17. 6.0 & TKO http://67-72chevytrucks.com/vboard/s...d.php?t=788602 93 K1500 Short Step, 350, NV4500, EBL flash ECU. Vortec heads & roller cam someday... 05 Jeep Wrangler Unlimited. 3” lift & 6-speed 02 E320 the insurance total “free car” 13 Tahoe LTZ

08-06-2008, 02:24 AM	#9
70cst Senior Member Join Date: Feb 2001 Location: New Madison, Ohio Posts: 21,365	Re: BBC heat shield DFW I will take it (if it's avaliable and not spoken for) if you can wait a day or so. I want to find out the condition of mine. I have a 402BB in a 70 C10. __________________ A husband can be right...or...A husband can be happy. 67-72 Chevy and GMC Trucks...The Classic Truck for the Classic Folk. 1970 CST Two tone green, 402BB, 400 Automatic, Tach, Buckets, AC, AM-FM, Tilt, GM CB, GM 8 Tract, LWB, etc JOHN 17:3...The better side of "LIFE" Remember: Everyday is a good day...Some are just gooder!

08-06-2008, 09:43 AM	#10
clay68c10 Senior Member Join Date: Aug 2004 Location: Centennial, CO Posts: 2,933	Re: BBC heat shield DFW 70cst: Sure, I can do that. Let me know. __________________ ClusterTruck: 68 C10 Bought in 89, wrecked in 03. Slow low $ rebuild started '17. 6.0 & TKO http://67-72chevytrucks.com/vboard/s...d.php?t=788602 93 K1500 Short Step, 350, NV4500, EBL flash ECU. Vortec heads & roller cam someday... 05 Jeep Wrangler Unlimited. 3” lift & 6-speed 02 E320 the insurance total “free car” 13 Tahoe LTZ

08-06-2008, 08:54 PM	#11
70cst Senior Member Join Date: Feb 2001 Location: New Madison, Ohio Posts: 21,365	Re: BBC heat shield DFW I will be looking at the truck this Friday afternoon so I will let you know Friday nite or Sat. Thanks. __________________ A husband can be right...or...A husband can be happy. 67-72 Chevy and GMC Trucks...The Classic Truck for the Classic Folk. 1970 CST Two tone green, 402BB, 400 Automatic, Tach, Buckets, AC, AM-FM, Tilt, GM CB, GM 8 Tract, LWB, etc JOHN 17:3...The better side of "LIFE" Remember: Everyday is a good day...Some are just gooder!

08-11-2008, 11:27 AM	#12
70cst Senior Member Join Date: Feb 2001 Location: New Madison, Ohio Posts: 21,365	Re: BBC heat shield DFW Sold...PM sent. __________________ A husband can be right...or...A husband can be happy. 67-72 Chevy and GMC Trucks...The Classic Truck for the Classic Folk. 1970 CST Two tone green, 402BB, 400 Automatic, Tach, Buckets, AC, AM-FM, Tilt, GM CB, GM 8 Tract, LWB, etc JOHN 17:3...The better side of "LIFE" Remember: Everyday is a good day...Some are just gooder!

08-11-2008, 02:37 PM	#14
clay68c10 Senior Member Join Date: Aug 2004 Location: Centennial, CO Posts: 2,933	Re: BBC heat shield DFW PM'd you back, sold. I'm sure my 68 BBC truck didn't come with a heat shield. __________________ ClusterTruck: 68 C10 Bought in 89, wrecked in 03. Slow low $ rebuild started '17. 6.0 & TKO http://67-72chevytrucks.com/vboard/s...d.php?t=788602 93 K1500 Short Step, 350, NV4500, EBL flash ECU. Vortec heads & roller cam someday... 05 Jeep Wrangler Unlimited. 3” lift & 6-speed 02 E320 the insurance total “free car” 13 Tahoe LTZ

08-11-2008, 09:57 PM	#16
Classic Bowties Always on the hunt... Join Date: Sep 2006 Location: Portland, OR. Posts: 5,579	Re: BBC heat shield DFW This type off heat shield is not going to help in keeping any heat off your starter.

08-11-2008, 11:11 PM	#18
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 19,996	Re: BBC heat shield DFW The shield is designed to keep the cab floor from getting too hot from the passenger side exhaust manifold. Using a high-torque mini starter will solve all of the problems associated with the stock starter.

08-11-2008, 11:22 PM	#20
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 19,996	Re: BBC heat shield DFW No problem...the mini starter also gives you a lot more clearance if you are using headers instead of manifolds.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.