Accelerator Pedal & cable setup, DFW - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**clay68c10** · 07-30-2008, 09:14 PM

Selling an accel pedal setup from a 72. It has the stainless trim.
$20 local, $25 shipped. Paypal, MO, or cash.
Respond in the thread only please.

tommypic · 07-31-2008, 05:11 AM

let me look at my parts truck and see if its still there , if not I want . I will look ASAP

71stub · 07-31-2008, 09:53 AM

Put me in line if tommypic doesnt take it.

**clay68c10** · 07-31-2008, 10:45 AM

Ok, tommypic then 71stub

toomanytoyz · 07-31-2008, 10:59 AM

Put me in the Line up also................

Rick

Gray Ghost · 07-31-2008, 05:32 PM

Well, if it gets this far Clay....let me know.

**clay68c10** · 07-31-2008, 07:55 PM

So: tommypic first, then 71stub, then toomanytoyz, then Kelly.

**clay68c10** · 08-01-2008, 02:51 PM

PM sent to tommypic, checking interest.

**clay68c10** · 08-02-2008, 08:27 PM

Well, it's been over 48hrs and I haven't heard anything from tommypic, so it's on to 71stub.

tommypic · 08-03-2008, 07:40 AM

sorry I hadnt got back to you , puter been doing its own thing . Thanks for waiting tho , I think I know where 1 is here local .
Thanks Again
Tommy

**clay68c10** · 08-03-2008, 04:21 PM

No problem.
PM to 71stub...

**clay68c10** · 08-04-2008, 09:34 AM

Sold to 71stub.

wrapumup · 08-04-2008, 04:09 PM

Darn it I saw this too late to get in line.

chrislehr · 08-04-2008, 07:18 PM

Quote:

Originally Posted by wrapumup

Darn it I saw this too late to get in line.

I have the same pedal, but no throttle cable for it....

toomanytoyz · 08-04-2008, 08:46 PM

Quote:

Originally Posted by chrislehr

I have the same pedal, but no throttle cable for it....

What would you want for it ?

Thanks, Rick

chrislehr · 08-05-2008, 08:31 AM

Quote:

Originally Posted by toomanytoyz

What would you want for it ?

Thanks, Rick

20 shipped in lower 48 states?

I can remove it this w/e for ya.

toomanytoyz · 08-05-2008, 10:32 AM

Quote:

Originally Posted by chrislehr

20 shipped in lower 48 states?

I can remove it this w/e for ya.

pm sent.............

Rick

rio · 08-05-2008, 11:34 AM

Do you still have the accel pedal setup for sale?

71stub · 08-05-2008, 04:49 PM

I have an extra pedal setup like this without the stainless trim or cable i would get rid of too.

alfeefish · 08-05-2008, 05:06 PM

Will this work on a 67?

71stub · 08-05-2008, 05:33 PM

No, 67's used a rod instead of a cable and the pedal mounted on tabs on the floor. Also the three bolt pattern in the firewall is different. This pedal setup could be adapted to fit with some work though.

**clay68c10** · 08-05-2008, 06:09 PM

There's a FAQ about retrofitting one of these into a pre-71.

71stub, I'll be shipping out the pedal in the morning. Thanks.

**clay68c10** · 08-06-2008, 09:44 AM

Shipped this morning, PM sent with tracking #.

07-30-2008, 09:14 PM	#1
clay68c10 Senior Member Join Date: Aug 2004 Location: Centennial, CO Posts: 2,995	Accelerator Pedal & cable setup, DFW Selling an accel pedal setup from a 72. It has the stainless trim. $20 local, $25 shipped. Paypal, MO, or cash. Respond in the thread only please. __________________ ClusterTruck: 68 C10 Bought in 89, wrecked in 03. Slow low $ rebuild started '17. 6.0 & TKO http://67-72chevytrucks.com/vboard/s...d.php?t=788602 93 K1500 Short Step, 350, NV4500, EBL flash ECU. Vortec heads & roller cam someday... 05 Jeep Wrangler Unlimited. 3” lift & 6-speed 02 E320 the insurance total “free car” 13 Tahoe LTZ

07-31-2008, 05:11 AM	#2
tommypic Registered User Join Date: Jan 2008 Location: Piedmont , SC Posts: 728	Re: Accelerator Pedal & cable setup, DFW let me look at my parts truck and see if its still there , if not I want . I will look ASAP __________________ My ZipCode = 29673 2008 Silverado Z71 LTZ Wrecked New Ride SOLD 71-72 Custom A/C Parts Truck < selling parts 67 Chevy ShortStep SOLD 67 GMC SWB Step <-- For Sell 67 Chevy SWB Step <-- working on 2000 Road King <-- SOLD 97 F150 my ride for now 2006 Escape wifes ride HELP SUPPORT THE BOARD http://67-72chevytrucks.com/vboard/payments.php Great How To Thread http://67-72chevytrucks.com/vboard/s...d.php?t=157669 Vendor Sites http://67-72chevytrucks.com/links/browselinks.php?c=2

07-31-2008, 09:53 AM	#3
71stub Registered User Join Date: Mar 2008 Location: Forman, ND Posts: 365	Re: Accelerator Pedal & cable setup, DFW Put me in line if tommypic doesnt take it.

07-31-2008, 10:45 AM	#4
clay68c10 Senior Member Join Date: Aug 2004 Location: Centennial, CO Posts: 2,995	Re: Accelerator Pedal & cable setup, DFW Ok, tommypic then 71stub __________________ ClusterTruck: 68 C10 Bought in 89, wrecked in 03. Slow low $ rebuild started '17. 6.0 & TKO http://67-72chevytrucks.com/vboard/s...d.php?t=788602 93 K1500 Short Step, 350, NV4500, EBL flash ECU. Vortec heads & roller cam someday... 05 Jeep Wrangler Unlimited. 3” lift & 6-speed 02 E320 the insurance total “free car” 13 Tahoe LTZ

07-31-2008, 10:59 AM	#5
toomanytoyz Luv the Crewcabs Join Date: Aug 2006 Location: Andrews, In. 46702 Posts: 4,097	Re: Accelerator Pedal & cable setup, DFW Put me in the Line up also................ Rick __________________ 55 Nomad 52 Willys Truck 67 Stepper 67 Fleet 68 Wrecker 68 Suburban 76 Crewcab 79 Gmc Dumptruck 84 Blazer 86 Crewcab Stepside 87 Iroc 89 GMC Plow Truck 91 Camaro Vert 96 Z71 Stepsde

07-31-2008, 05:32 PM	#6
Gray Ghost Senior Member Join Date: Sep 2004 Location: Terrell, TX Posts: 1,967	Re: Accelerator Pedal & cable setup, DFW Well, if it gets this far Clay....let me know. __________________ Kelly '05 GMC Sierra SLE Z71 Bone stock except for new bed rail caps.

07-31-2008, 07:55 PM	#7
clay68c10 Senior Member Join Date: Aug 2004 Location: Centennial, CO Posts: 2,995	Re: Accelerator Pedal & cable setup, DFW So: tommypic first, then 71stub, then toomanytoyz, then Kelly. __________________ ClusterTruck: 68 C10 Bought in 89, wrecked in 03. Slow low $ rebuild started '17. 6.0 & TKO http://67-72chevytrucks.com/vboard/s...d.php?t=788602 93 K1500 Short Step, 350, NV4500, EBL flash ECU. Vortec heads & roller cam someday... 05 Jeep Wrangler Unlimited. 3” lift & 6-speed 02 E320 the insurance total “free car” 13 Tahoe LTZ

08-01-2008, 02:51 PM	#8
clay68c10 Senior Member Join Date: Aug 2004 Location: Centennial, CO Posts: 2,995	Re: Accelerator Pedal & cable setup, DFW PM sent to tommypic, checking interest. __________________ ClusterTruck: 68 C10 Bought in 89, wrecked in 03. Slow low $ rebuild started '17. 6.0 & TKO http://67-72chevytrucks.com/vboard/s...d.php?t=788602 93 K1500 Short Step, 350, NV4500, EBL flash ECU. Vortec heads & roller cam someday... 05 Jeep Wrangler Unlimited. 3” lift & 6-speed 02 E320 the insurance total “free car” 13 Tahoe LTZ

08-02-2008, 08:27 PM	#9
clay68c10 Senior Member Join Date: Aug 2004 Location: Centennial, CO Posts: 2,995	Re: Accelerator Pedal & cable setup, DFW Well, it's been over 48hrs and I haven't heard anything from tommypic, so it's on to 71stub. __________________ ClusterTruck: 68 C10 Bought in 89, wrecked in 03. Slow low $ rebuild started '17. 6.0 & TKO http://67-72chevytrucks.com/vboard/s...d.php?t=788602 93 K1500 Short Step, 350, NV4500, EBL flash ECU. Vortec heads & roller cam someday... 05 Jeep Wrangler Unlimited. 3” lift & 6-speed 02 E320 the insurance total “free car” 13 Tahoe LTZ

08-03-2008, 07:40 AM	#10
tommypic Registered User Join Date: Jan 2008 Location: Piedmont , SC Posts: 728	Re: Accelerator Pedal & cable setup, DFW sorry I hadnt got back to you , puter been doing its own thing . Thanks for waiting tho , I think I know where 1 is here local . Thanks Again Tommy __________________ My ZipCode = 29673 2008 Silverado Z71 LTZ Wrecked New Ride SOLD 71-72 Custom A/C Parts Truck < selling parts 67 Chevy ShortStep SOLD 67 GMC SWB Step <-- For Sell 67 Chevy SWB Step <-- working on 2000 Road King <-- SOLD 97 F150 my ride for now 2006 Escape wifes ride HELP SUPPORT THE BOARD http://67-72chevytrucks.com/vboard/payments.php Great How To Thread http://67-72chevytrucks.com/vboard/s...d.php?t=157669 Vendor Sites http://67-72chevytrucks.com/links/browselinks.php?c=2

08-03-2008, 04:21 PM	#11
clay68c10 Senior Member Join Date: Aug 2004 Location: Centennial, CO Posts: 2,995	Re: Accelerator Pedal & cable setup, DFW No problem. PM to 71stub... __________________ ClusterTruck: 68 C10 Bought in 89, wrecked in 03. Slow low $ rebuild started '17. 6.0 & TKO http://67-72chevytrucks.com/vboard/s...d.php?t=788602 93 K1500 Short Step, 350, NV4500, EBL flash ECU. Vortec heads & roller cam someday... 05 Jeep Wrangler Unlimited. 3” lift & 6-speed 02 E320 the insurance total “free car” 13 Tahoe LTZ

08-04-2008, 09:34 AM	#12
clay68c10 Senior Member Join Date: Aug 2004 Location: Centennial, CO Posts: 2,995	Re: Accelerator Pedal & cable setup, DFW Sold to 71stub. __________________ ClusterTruck: 68 C10 Bought in 89, wrecked in 03. Slow low $ rebuild started '17. 6.0 & TKO http://67-72chevytrucks.com/vboard/s...d.php?t=788602 93 K1500 Short Step, 350, NV4500, EBL flash ECU. Vortec heads & roller cam someday... 05 Jeep Wrangler Unlimited. 3” lift & 6-speed 02 E320 the insurance total “free car” 13 Tahoe LTZ

08-04-2008, 04:09 PM	#13
wrapumup Junior Member Join Date: Mar 2006 Location: Missouri Posts: 113	Re: Accelerator Pedal & cable setup, DFW Darn it I saw this too late to get in line.

08-05-2008, 11:34 AM	#18
rio Junior Member Join Date: Sep 2007 Location: Brenham,TX Posts: 571	Re: Accelerator Pedal & cable setup, DFW Do you still have the accel pedal setup for sale? __________________ 1970 1/2 ton swb

08-05-2008, 04:49 PM	#19
71stub Registered User Join Date: Mar 2008 Location: Forman, ND Posts: 365	Re: Accelerator Pedal & cable setup, DFW I have an extra pedal setup like this without the stainless trim or cable i would get rid of too.



Register or Log In To remove these advertisements.

08-05-2008, 05:06 PM	#20
alfeefish Registered User Join Date: Feb 2005 Location: Harrison TN Posts: 183	Re: Accelerator Pedal & cable setup, DFW Will this work on a 67?

08-05-2008, 05:33 PM	#21
71stub Registered User Join Date: Mar 2008 Location: Forman, ND Posts: 365	Re: Accelerator Pedal & cable setup, DFW No, 67's used a rod instead of a cable and the pedal mounted on tabs on the floor. Also the three bolt pattern in the firewall is different. This pedal setup could be adapted to fit with some work though.

08-05-2008, 06:09 PM	#22
clay68c10 Senior Member Join Date: Aug 2004 Location: Centennial, CO Posts: 2,995	Re: Accelerator Pedal & cable setup, DFW There's a FAQ about retrofitting one of these into a pre-71. 71stub, I'll be shipping out the pedal in the morning. Thanks. __________________ ClusterTruck: 68 C10 Bought in 89, wrecked in 03. Slow low $ rebuild started '17. 6.0 & TKO http://67-72chevytrucks.com/vboard/s...d.php?t=788602 93 K1500 Short Step, 350, NV4500, EBL flash ECU. Vortec heads & roller cam someday... 05 Jeep Wrangler Unlimited. 3” lift & 6-speed 02 E320 the insurance total “free car” 13 Tahoe LTZ

08-06-2008, 09:44 AM	#23
clay68c10 Senior Member Join Date: Aug 2004 Location: Centennial, CO Posts: 2,995	Re: Accelerator Pedal & cable setup, DFW Shipped this morning, PM sent with tracking #. __________________ ClusterTruck: 68 C10 Bought in 89, wrecked in 03. Slow low $ rebuild started '17. 6.0 & TKO http://67-72chevytrucks.com/vboard/s...d.php?t=788602 93 K1500 Short Step, 350, NV4500, EBL flash ECU. Vortec heads & roller cam someday... 05 Jeep Wrangler Unlimited. 3” lift & 6-speed 02 E320 the insurance total “free car” 13 Tahoe LTZ

Register or Log In To remove these advertisements.