|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
08-04-2008, 07:32 PM
|
#1 |
|
Registered User
Join Date: Aug 2008
Location: Raymond Kansas
Posts: 28
|
Glad to be here & Thank you!
I traded for a 71 GMC Longbed 350 V8 automatic trans on Saturday AUG 2.
I found this forum while searching for electrical help for the lighting. While waiting to get my posting privelidges I searched all posts on electrical troubleshooting on this site. I must say there is ALOT of priceless info on this site. That is where the THANK YOU comes in. I had no marker lights,brake lights, the tail lights came on when the brake was depressed. I removed the entire rear harness & light housings and began to remove years of added trailer wiring. Cleaned all ground contacts & added the bed to frame ground strap. Everything worked except no brake lights. I checked everything that I could read to check in the searched posts. I then decided the only thing I hadnt looked at real good was the moon connector. I pulled it down to put an eyeball on it and sure enough on the side where the b/w wire is it had at some time been hot enough to melt. I ran a jumper from one side of the connector b/w wire to the other side and BINGO brake lights. To all who answer peoples problems Thanks a million it helped me straighten ALL the lighting out including the Cargo lamp on the rear of the cab. Now its all body work...So I will be asking alot more questions and searching all of the posts before I ask. I AM SO GLAD TO BE HERE! |
|
|
|
08-04-2008, 07:39 PM
|
#2 |
|
Nothing to see here.....
 
Join Date: Jun 2007
Location: Shawnee, KS
Posts: 4,625
|
Re: Glad to be here & Thank you!
WELCOME ABOARD!!!! Nice to have another Kansan here!!
and yes, this is one of the best forums I have ever had the privilege to belong to.
__________________
Doug  THANK YOU to our American Soldiers & Veterans - POW MIA "You will NEVER be forgotten". The democracy will cease to exist when you take away from those who are willing to work and give to those who would not. Thomas Jefferson |
|
|
|
|
08-04-2008, 08:32 PM
|
#3 |
|
Step Brother
Join Date: Sep 2007
Location: K-town
Posts: 4,029
|
Re: Glad to be here & Thank you!
 from Knoxville Tn...
|
|
|
|
|
08-04-2008, 08:40 PM
|
#4 |
|
Registered User
Join Date: Jun 2008
Location: South Florida
Posts: 11,375
|
Re: Glad to be here & Thank you!
 from miami!!!!!
__________________
Get your facts first, and then you can distort them as much as you please!!!!!. Sylvester's build thread >>>http://67-72chevytrucks.com/vboard/s...ht=big+rebuild |
|
|
|
|
08-04-2008, 08:44 PM
|
#5 |
|
Registered User
Join Date: Oct 2006
Location: Surrey B.C
Posts: 432
|
Re: Glad to be here & Thank you!
from surrey B.C Canada
|
|
|
|
|
08-04-2008, 08:46 PM
|
#6 |
|
Registered User
Join Date: Aug 2008
Location: Winnipeg, Manitoba
Posts: 19
|
Re: Glad to be here & Thank you!
Welcome From Winnipeg M.B. Canada. I'm new as of yesterday to.
|
|
|
|
|
08-04-2008, 09:21 PM
|
#7 |
|
RIP BigDaddyDave ~7-23-09~ You will be missed~
Join Date: Aug 2007
Location: Concord NC
Posts: 1,361
|
Re: Glad to be here & Thank you!
Welcome to the board from North Carolina!
__________________
BigDaddyDave's Truck: http://www.flickr.com/photos/daves71chevy/ | See it in Action! |
|
|
|
|
08-04-2008, 09:29 PM
|
#8 |
|
Junior Member
Join Date: Dec 2006
Location: Southeast Missouri
Posts: 2,436
|
Re: Glad to be here & Thank you!
Welcome from Southeast Missouri.
Danny
__________________
'67 Chevy C-20 short stepper - build complete, 454/SM-465. '75 C-30 Single Cab DRW-350 small block/NP-435. '77 GMC-6500 Dump Truck, 427 Tall Deck. '92 GMC K-3500 Duallie, 454/4L80E. |
|
|
|
|
08-04-2008, 09:42 PM
|
#9 |
|
Tasty Cakes!
Join Date: Apr 2003
Location: Gilbert, AZ
Posts: 2,112
|
Re: Glad to be here & Thank you!
Welcome from Phoenix! BTW, glad you were smart enough to use the search feature
__________________
I'm a little  and a lot  Ground beef: A cow with no legs. ---------------- '66 Chevy SWB "Penny" '67 Chevy Big Window SWB- aka "Pearl" '72 Burb- "Betty" "It's not a hearse dammit" '99 Chevy Ext. cab Silverado |
|
|
|
|
08-04-2008, 10:05 PM
|
#10 |
|
Registered User
Join Date: Oct 2005
Location: south dakota
Posts: 1,891
|
Re: Glad to be here & Thank you!
Welcome from South Dakota.
|
|
|
|
|
08-04-2008, 10:08 PM
|
#11 |
|
Old member
Join Date: Jan 2002
Location: Liberty, & Garden City S.C. , U.S.
Posts: 19,936
|
Re: Glad to be here & Thank you!
Welcome aboard from SC.
__________________
1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71  Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs. |
|
|
|
|
08-05-2008, 12:34 AM
|
#12 |
|
Registered User
Join Date: Jun 2008
Location: Alamogordo, NM
Posts: 57
|
Re: Glad to be here & Thank you!
Welcome from New Mexico!
Someone has to say it 
|
|
|
|
|
08-05-2008, 01:04 AM
|
#13 |
|
I have a radical idea!
Join Date: Jan 2005
Location: Sweet Home Alabama!
Posts: 6,513
|
Re: Glad to be here & Thank you!
Welcome from 'Bama!
__________________
'67 C-30 Dually Pickup 6.2 Turbo Diesel, NP435 ‘72 C-10 SWB , 350 4bbl, TH350 '69 C-10 SWB , 250 L6, 3 OTT '69 GMC C3500, dump truck, 351 V6, NP435 '84 M1009 CUCV Military Blazer 67 C-30 Turbodiesel build thread http://67-72chevytrucks.com/vboard/s...d.php?t=254096 My trucks http://s226.photobucket.com/albums/d...ediafilter=all Member of the 1-Ton Club! |
|
|
|
|
08-05-2008, 04:38 AM
|
#14 |
|
THE VILLIAGE IDIOT
Join Date: Nov 2006
Location: Tooele, Utah
Posts: 1,405
|
Re: Glad to be here & Thank you!
howdy and welcome...
__________________
honestly honey,,i have no idea how that truck got here. 
|
|
|
|
|
08-05-2008, 06:52 AM
|
#15 |
|
67-72 Addict!
Join Date: Feb 2002
Location: The TAX State!
Posts: 7,857
|
Re: Glad to be here & Thank you!
Welcome from Maryland! Check out the FAQ section that Krue has organized
Here is the link:http://67-72chevytrucks.com/vboard/s...d.php?t=262550
__________________
Jim 1970 C/10 Fleetside w/Ghost Flames Lowered 4.5" front and 4" rear (Raked) 355/350 Turbo w/shift kit 10" Redneck Performance Verter w/2500 stall Hooker Super Comps part#2808-1 Performer RPM Air-Gap 12 Bolt w/3:73 gears- Eaton Posi Comp Cams XE262 with 1.6 Crane Energizers, Road Demon 625 and Brodix IK 180 heads Last edited by 70c10; 08-05-2008 at 06:54 AM. |
|
|
|
|
08-05-2008, 09:22 AM
|
#16 |
|
Old Skool Club
Join Date: Jun 2001
Location: Benton, AR "The Heart of Arkansas"
Posts: 10,880
|
Re: Glad to be here & Thank you!
From the Heart of R-KANSAS....a big welcome!!
__________________
Member Nr. 2770 '96 GMC Sportside; 4.3/SLT - Daily driven....constantly needs washed. '69 C-10 SWB; 350/TH400 - in limbo The older I get, the better I was. |
|
|
|
|
08-05-2008, 09:24 AM
|
#17 | |
|
Registered User
Join Date: Aug 2008
Location: Raymond Kansas
Posts: 28
|
Re: Glad to be here & Thank you!
Quote:
Replaced the driver side door & ordered the pieces to replace below the door last night. Geno H |
|
|
|
|
|
08-05-2008, 09:26 AM
|
#18 |
|
PROJECT 7DEUCE
Join Date: Dec 2002
Location: GRANTS PASS OR
Posts: 21,594
|
Re: Glad to be here & Thank you!
Congrats and welcome to the baord from southern oregon..
__________________
GO BIG GREEN GO DUCKSMEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P.. |
|
|
|
|
08-05-2008, 10:51 AM
|
#19 |
|
I am a Referee of life.
Join Date: Jun 2000
Location: Greensboro N.C.
Posts: 13,993
|
Re: Glad to be here & Thank you!
Geno, WELCOME!!! Looks like a good project.Just a heads up on parts, we have some great vendors here on the Bb and they usually have better pricing and much better Customer service than the big box truck parts guys.There is also a reviews list on which vendors are out there doing what.
__________________
The 47-present Chevrolet and GMC Truck Message Board Network,it's owners,moderators,members,and associates of any type should not be held responsible for my opinion. You can't fix stupid,not even with duct tape. "My appearance is due to the fact that "GOD" does punish you for having too much fun!" Barrett-Jackson has perfected alchemy,they make rust into gold! "You can lead a horse to water but you can't saddle a duck" "Cleverly disguised as a 'Responsible Adult' "Sometimes your Knight in shining armor is just a retard in tinfoil" |
|
|
|
|
08-05-2008, 11:55 AM
|
#20 |
|
Junior Member
Join Date: Dec 2006
Location: Southeast Missouri
Posts: 2,436
|
Re: Glad to be here & Thank you!
I have found that I can get most parts for my trucks at local parts stores except for body parts. Since my latest project is made up of parts from '67, '68, '69, '71, '78 and '96 trucks I have also found that I need to know what year part I am needing. Sometimes their knowledge of our old trucks is most times limited.
I try to support local stores when I can, but the site vendors I have dealt with are very helpful and know our trucks and their products. Danny
__________________
'67 Chevy C-20 short stepper - build complete, 454/SM-465. '75 C-30 Single Cab DRW-350 small block/NP-435. '77 GMC-6500 Dump Truck, 427 Tall Deck. '92 GMC K-3500 Duallie, 454/4L80E. |
|
|
|
|
08-05-2008, 12:22 PM
|
#21 | |
|
Old Skool Club
Join Date: Jun 2001
Location: Benton, AR "The Heart of Arkansas"
Posts: 10,880
|
Re: Glad to be here & Thank you!
Quote:
When (and I used to sell parts) the parts person asks questions that have absolutely nothing to do with my quest for a specific part....I know that they don't know what I'm talking about. But, just to be fair, it ain't always their fault. Still, you gotta know the lingo. I was working one time and a customer came in asking for a "center head gasket". The person who was being addressed looked at me (like I was the most knowledgeable one) and shrugged. I asked the make and model of the car and went and got what they wanted. I'm gonna need a set before too long, myself.
__________________
Member Nr. 2770 '96 GMC Sportside; 4.3/SLT - Daily driven....constantly needs washed. '69 C-10 SWB; 350/TH400 - in limbo The older I get, the better I was. |
|
|
|
|
|
08-05-2008, 01:08 PM
|
#22 |
|
Gettin By on Gettin By
Join Date: Jan 2008
Location: Cedar Creek, Tx
Posts: 1,033
|
Re: Glad to be here & Thank you!
Welcome from Austin TX.
just watch out, you might get addicted to the board. Doesn't realy hurt if you get addicted to these trucks, as long as the wife is fine with it. LOL.
__________________
69 CST10 LWB 455 Buick 00 S10 2.2 Vin5 76 GL1000 Naked 1bl VW carb "Adios to all the concrete; Gonna get me some dirt road back streets" |
|
|
|
|
08-05-2008, 04:13 PM
|
#23 |
|
Registered User
Join Date: Jun 2004
Location: Utica Nebraska
Posts: 244
|
Re: Glad to be here & Thank you!
It's great to see all the new truck guys coming on to the forum.
A word to all you new guys: This site has the most heplful membership you will ever encounter. Do yourselves and the site a favor by becoming supporting members, the advise and tips you will find here are worth waaay more than the cost of supporting the site. Welcome aboard. CrashBob
__________________
"Life is all about ass. You're either covering it,laughing it off, kicking it, kissing it, busting it or trying to get a piece of it. |
|
|
|
|
08-05-2008, 05:05 PM
|
#24 |
|
Post Whore
Join Date: Feb 2000
Location: Rose Hill, KS, USA
Posts: 12,683
|
Re: Glad to be here & Thank you!
Welcome from another Kansan. I'll have to grab a map and figure out where Raymond, KS is located.
__________________
1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14 |
|
|
|
|
08-05-2008, 10:16 PM
|
#25 | |
|
Registered User
Join Date: Aug 2008
Location: Raymond Kansas
Posts: 28
|
Re: Glad to be here & Thank you!
Quote:
Thanks for the warm welcome everyone. I will keep updating the progress. Geno H |
|
|
|
|
|
| Bookmarks |
|
|
Linear Mode
