60-66 stepside fenders - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**scotts62** · 08-12-2008, 09:00 PM

left and right stepside fenders for sale both in good condition, drivers has the notch and bracket for a spare tire. no major dents or rust, only surface rust.

$200

passenger

drivers

jb4short · 08-15-2008, 06:35 PM

you may post them in the earlier section too- those also fit '58-'59.

Good luck with the sale

**scotts62** · 08-16-2008, 02:50 PM

Oh ok cool, thanks

original_balzer · 08-20-2008, 09:56 PM

How is the mounting surface? Mine are rusted through where it meets the bed. And my driver side has a bad patch made of thin steel and lots of bondo to get rid of the spare well.

**scotts62** · 09-13-2008, 09:59 AM

They are good just the normal surface rust but other than that they have all the holes attached

Norselander · 11-05-2008, 04:13 PM

PM for you.

*LILRED66* · 11-10-2008, 10:44 PM

Quote:

Originally Posted by Tri-ProAutomotive

you may post them in the earlier section too- those also fit '58-'59.

Good luck with the sale

They are factory correct for '55-'66.

**scotts62** · 11-11-2008, 12:09 AM

Oh ok thanks man

65RatStep · 12-09-2008, 07:56 PM

Scott-
do you still have those fenders I am wanting the notched spatre fender for my 65 stepside shortbox. please feel free to contact me. Douge was asking for me earlier in the week, I became amember on this site just a couple of days ago so I could respond to you. my cell # is 913.706.9816 let me know thanks!
Brian

tcb-1 · 12-09-2008, 08:57 PM

Scott,
Brian is whom I mentioned a few days back. Good guy with a nice little rat rod project going. Thanks for pm-ing me Sunday. If you need anything on my end to help with getting with Brian, pm me anytime!!

And Brian, hope you enjoy the forum! Great people with great info! See, found your fenders!

65RatStep · 12-09-2008, 11:57 PM

Hey Doug-
thanks for the hook ups, I am trying to get the hang of this forum stuff, never done before but has a lot of info to learn! thanks again. Hey how can I load pis of my tuck? and did you get the couple I sent you in that e-mail?
Later
Brian

08-12-2008, 09:00 PM	#1
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,243	60-66 stepside fenders left and right stepside fenders for sale both in good condition, drivers has the notch and bracket for a spare tire. no major dents or rust, only surface rust. $200 passenger drivers __________________ Scott 93 crew cab build Project 62

08-15-2008, 06:35 PM	#2
jb4short Damn Yankee Join Date: Feb 2007 Location: Lynchburg, VA Posts: 2,261	Re: 60-66 stepside fenders you may post them in the earlier section too- those also fit '58-'59. Good luck with the sale Last edited by jb4short; 08-15-2008 at 06:36 PM.

08-16-2008, 02:50 PM	#3
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,243	Re: 60-66 stepside fenders Oh ok cool, thanks __________________ Scott 93 crew cab build Project 62

08-20-2008, 09:56 PM	#4
original_balzer Registered User Join Date: May 2008 Location: roosevelt utah Posts: 325	Re: 60-66 stepside fenders How is the mounting surface? Mine are rusted through where it meets the bed. And my driver side has a bad patch made of thin steel and lots of bondo to get rid of the spare well. __________________ -61 c10 short step -67 c10 short step -71 k10 long fleet -77 k20 long fleet (gettin all the goodies from frankentruck) -79 c30/k30 3+3 frankentruck (cab and frame for sale) -99 GMC yukon daily driver

09-13-2008, 09:59 AM	#5
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,243	Re: 60-66 stepside fenders They are good just the normal surface rust but other than that they have all the holes attached __________________ Scott 93 crew cab build Project 62

11-05-2008, 04:13 PM	#6
Norselander Clunker Farm, Proprietor Join Date: Oct 2003 Location: Coastal Northern California Posts: 124	Re: 60-66 stepside fenders PM for you. __________________ Drew Chief Junk Jockey

11-11-2008, 12:09 AM	#8
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,243	Re: 60-66 stepside fenders Oh ok thanks man __________________ Scott 93 crew cab build Project 62

12-09-2008, 07:56 PM	#9
65RatStep Registered User Join Date: Dec 2008 Location: Shawnee, KS Posts: 2	Re: 60-66 stepside fenders Scott- do you still have those fenders I am wanting the notched spatre fender for my 65 stepside shortbox. please feel free to contact me. Douge was asking for me earlier in the week, I became amember on this site just a couple of days ago so I could respond to you. my cell # is 913.706.9816 let me know thanks! Brian

12-09-2008, 08:57 PM	#10
tcb-1 Nothing to see here..... Join Date: Jun 2007 Location: Shawnee, KS Posts: 4,625	Re: 60-66 stepside fenders Scott, Brian is whom I mentioned a few days back. Good guy with a nice little rat rod project going. Thanks for pm-ing me Sunday. If you need anything on my end to help with getting with Brian, pm me anytime!! And Brian, hope you enjoy the forum! Great people with great info! See, found your fenders! __________________ Doug THANK YOU to our American Soldiers & Veterans - POW MIA "You will NEVER be forgotten". The democracy will cease to exist when you take away from those who are willing to work and give to those who would not. Thomas Jefferson Last edited by tcb-1; 12-09-2008 at 09:01 PM.

12-09-2008, 11:57 PM	#11
65RatStep Registered User Join Date: Dec 2008 Location: Shawnee, KS Posts: 2	Re: 60-66 stepside fenders Hey Doug- thanks for the hook ups, I am trying to get the hang of this forum stuff, never done before but has a lot of info to learn! thanks again. Hey how can I load pis of my tuck? and did you get the couple I sent you in that e-mail? Later Brian



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.