See any other parts off this you want? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

chrislehr · 08-17-2008, 11:07 AM

Going to the scrap heap SOON.

Name a part you might want and I will name a price.

Sorry mods, I did list most of the parts removed with pricing here:
http://67-72chevytrucks.com/vboard/s...d.php?t=301695

I just wanted to give anyone a last shot on anything else left.

DREAMS OF A 67 · 08-17-2008, 11:15 AM

How much for the brake pedal assm. shipped to 37918?

jay_shy · 08-17-2008, 11:43 AM

How much for the plastic clips that hold the paint divider trim on the rear of the cab? Shipping to 16635.

Jason

72BlckButy · 08-17-2008, 11:59 AM

How much for the uncut radio part of the dash? Preferably with plenty of room for the perfect fit.

Shipped to 65043

While we're at it, how rough is the roof? Any rust on the inside part above the driver's/passengers visor area?

faribran · 08-17-2008, 12:19 PM

how good are the doors?.. how much for them.?

chrislehr · 08-17-2008, 02:21 PM

Quote:

Originally Posted by DREAMS OF A 67

How much for the brake pedal assm. shipped to 37918?

$35-40 shipped sounds about right

Quote:

Originally Posted by jay_shy

How much for the plastic clips that hold the paint divider trim on the rear of the cab? Shipping to 16635.

Jason

*if* I can remove them without damaging them, $10 shipped?

Quote:

Originally Posted by 72BlckButy

How much for the uncut radio part of the dash? Preferably with plenty of room for the perfect fit.

Shipped to 65043

While we're at it, how rough is the roof? Any rust on the inside part above the driver's/passengers visor area?

I was hoping to sell the dash whole without cutting it if at all, but if no other takers, I can chop it out and send to you for $30 shipped. The roof is VERY bad. Here is a better pic:

Quote:

Originally Posted by faribran

how good are the doors?.. how much for them.?

Bottom 6 inches are TOAST. Above that is fresh, cancer free and straight minus one easy dent on one (dont recall which atm) If I was better with body work, I would say they are repairable. Would not want to ship them, but will give them up for like $20 each.

Dont have a better pic at the moment on those, but can take one tonight if you would like.

chrislehr · 08-17-2008, 02:22 PM

Oh, also, please check the other thread in post #1 - a LOT of those parts I already stripped are still available!

jay_shy · 08-17-2008, 02:32 PM

will you take 5.00 shipped(they should fit in a standard envelope)? All you have to do is slide them (to the right I think) so the tiny pin is in the larger opening then they lift right off.
Jason

chrislehr · 08-17-2008, 06:03 PM

Quote:

Originally Posted by jay_shy

will you take 5.00 shipped(they should fit in a standard envelope)? All you have to do is slide them (to the right I think) so the tiny pin is in the larger opening then they lift right off.
Jason

Sure - didnt know the size (nor did I try to get them off yet)

Ill try this week as it should be a little cooler out and will send you a PM - thanks!

msgross · 08-17-2008, 06:25 PM

1st pic
I need this area if you have time to cut it out.

It's the area where the firewall meets the floor under the drivers feet. 4" up the firewall and 2" down the floor for about 10-12" wide would be great. Especially if it's the area that joins the kickpanel.

2nd pic...How's the area under and around the vents on the kick panel?

68 short step · 08-17-2008, 08:30 PM

ill take the heater controls, LMK on shipping to 74011. thanks

DREAMS OF A 67 · 08-17-2008, 08:46 PM

thanks,but I'll pass

*1972Ryan* · 08-17-2008, 09:25 PM

Put me in line for the dash section cut-out if you decide to part

67Mach1 · 08-17-2008, 09:58 PM

what condition is the gas tank in?

thanks,
Thomas

chrislehr · 08-18-2008, 06:24 PM

Quote:

Originally Posted by msgross

1st pic
I need this area if you have time to cut it out.

It's the area where the firewall meets the floor under the drivers feet. 4" up the firewall and 2" down the floor for about 10-12" wide would be great. Especially if it's the area that joins the kickpanel.

2nd pic...How's the area under and around the vents on the kick panel?

Honestly - rotten beyond worth cutting out. Sorry.

Quote:

Originally Posted by 68 short step

ill take the heater controls, LMK on shipping to 74011. thanks

FYI, hard to see, but the PO had a toggle switch on the left side so there is a 1/2" hole there. Still interested?

Quote:

Originally Posted by DREAMS OF A 67

thanks,but I'll pass

Name your price. I was concerned that shipping would be pricey.

Quote:

Originally Posted by 67Mach1

what condition is the gas tank in?

thanks,
Thomas

Looks to be great shape. Some pics in the other thread - if you have specific pics or close ups you want, let me know.

Thanks, and TTT.

DREAMS OF A 67 · 08-18-2008, 08:23 PM

30 Shipped?

msgross · 08-18-2008, 08:26 PM

any updates on my pieces?

chrislehr · 08-18-2008, 09:07 PM

Quote:

Originally Posted by msgross

any updates on my pieces?

rotted beyond worth, IMO. I can take better pics for you tomorrow - dark now.

I posted above in reply!

67Mach1 · 08-18-2008, 11:31 PM

wouldn't mind looking at tank in person.

Send a PM with number and I will call you this week.

thanks,
Thomas

68 short step · 08-18-2008, 11:58 PM

could you do 50$ shipped for the driver and pass side door glass and the heater controler (no cables needed)???

msgross · 08-19-2008, 07:38 AM

Quote:

Originally Posted by chrislehr

rotted beyond worth, IMO. I can take better pics for you tomorrow - dark now.

I posted above in reply!

sorry, missed the reply...must have been a late night for me!

If they are rotted then don't worry... the floor looked pretty good in those pics...

northern 85 · 08-19-2008, 09:29 AM

How much for the lighter and trim ring shipped to 04937?

chrislehr · 08-19-2008, 09:39 AM

Quote:

Originally Posted by 67Mach1

wouldn't mind looking at tank in person.

Send a PM with number and I will call you this week.

thanks,
Thomas

PM sent

Quote:

Originally Posted by 68 short step

could you do 50$ shipped for the driver and pass side door glass and the heater controler (no cables needed)???

Probably can do that, but would have to be slow shipping to make it worthwhile. On the heater controller - see my other post - there is a 1/2" hole on the left side of the face where the PO had mounted a toggle switch. Just want to make sure you are still interested.

Quote:

Originally Posted by msgross

sorry, missed the reply...must have been a late night for me!

If they are rotted then don't worry... the floor looked pretty good in those pics...

I can try and take better close ups of the areas you wanted, just to make sure you arent still interested, but the area by the dimmer switch is pretty thin - I think one good hammer hit and it would bust through.

Quote:

Originally Posted by northern 85

How much for the lighter and trim ring shipped to 04937?

$8 sound fair?

Need the wiring, or safe to cut?

68 short step · 08-19-2008, 05:51 PM

yes im still instrested in both door glass and the holy heater control......when you say slow shipping what do you mean??? (normal ups ground or what?)

72BlckButy · 08-19-2008, 06:01 PM

Keep me posted if you decide to cut up the dash area.

08-17-2008, 11:15 AM	#2
DREAMS OF A 67 Step Brother Join Date: Sep 2007 Location: knoxville TN Posts: 1,950	Re: See any other parts off this you want? How much for the brake pedal assm. shipped to 37918? __________________ Joe

08-17-2008, 11:43 AM	#3
jay_shy SWB 4X4 CLUB Join Date: Feb 2005 Location: PA Posts: 1,088	Re: See any other parts off this you want? How much for the plastic clips that hold the paint divider trim on the rear of the cab? Shipping to 16635. Jason

08-17-2008, 11:59 AM	#4
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: See any other parts off this you want? How much for the uncut radio part of the dash? Preferably with plenty of room for the perfect fit. Shipped to 65043 While we're at it, how rough is the roof? Any rust on the inside part above the driver's/passengers visor area? __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package) Last edited by 72BlckButy; 08-17-2008 at 12:01 PM.

08-17-2008, 12:19 PM	#5
faribran Registered User Join Date: Jul 2005 Location: AL Posts: 1,828	Re: See any other parts off this you want? how good are the doors?.. how much for them.? __________________ "

08-17-2008, 02:22 PM	#7
chrislehr Engine n00b Join Date: Feb 2008 Location: Austin Posts: 1,031	Re: See any other parts off this you want? Oh, also, please check the other thread in post #1 - a LOT of those parts I already stripped are still available!

08-17-2008, 11:07 AM	#1
chrislehr Engine n00b Join Date: Feb 2008 Location: Austin Posts: 1,031	See any other parts off this you want? Going to the scrap heap SOON. Name a part you might want and I will name a price. Sorry mods, I did list most of the parts removed with pricing here: http://67-72chevytrucks.com/vboard/s...d.php?t=301695 I just wanted to give anyone a last shot on anything else left.

08-17-2008, 02:32 PM	#8
jay_shy SWB 4X4 CLUB Join Date: Feb 2005 Location: PA Posts: 1,088	Re: See any other parts off this you want? will you take 5.00 shipped(they should fit in a standard envelope)? All you have to do is slide them (to the right I think) so the tiny pin is in the larger opening then they lift right off. Jason

08-17-2008, 06:25 PM	#10
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: See any other parts off this you want? 1st pic I need this area if you have time to cut it out. It's the area where the firewall meets the floor under the drivers feet. 4" up the firewall and 2" down the floor for about 10-12" wide would be great. Especially if it's the area that joins the kickpanel. 2nd pic...How's the area under and around the vents on the kick panel? Attached Images __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer" Last edited by msgross; 08-17-2008 at 10:07 PM.

08-17-2008, 08:30 PM	#11
68 short step Senior Member Join Date: Aug 2005 Location: tulsa OK Posts: 3,070	Re: See any other parts off this you want? ill take the heater controls, LMK on shipping to 74011. thanks

08-17-2008, 08:46 PM	#12
DREAMS OF A 67 Step Brother Join Date: Sep 2007 Location: knoxville TN Posts: 1,950	Re: See any other parts off this you want? thanks,but I'll pass __________________ Joe

08-17-2008, 09:25 PM	#13
1972Ryan Account Suspended Join Date: Mar 2006 Location: Weaverville, NC Posts: 718	Re: See any other parts off this you want? Put me in line for the dash section cut-out if you decide to part

08-17-2008, 09:58 PM	#14
67Mach1 Senior Member Join Date: Nov 2005 Location: Round Rock, TX Posts: 1,100	Re: See any other parts off this you want? what condition is the gas tank in? thanks, Thomas __________________ Soon to be selling all but one, or two... Depends on what the Boss has to say....... 67 GMC Shortbed 454 Project more junk and most of it is for sale

08-18-2008, 08:23 PM	#16
DREAMS OF A 67 Step Brother Join Date: Sep 2007 Location: knoxville TN Posts: 1,950	Re: See any other parts off this you want? 30 Shipped? __________________ Joe

08-18-2008, 08:26 PM	#17
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: See any other parts off this you want? any updates on my pieces? __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer"

08-18-2008, 11:31 PM	#19
67Mach1 Senior Member Join Date: Nov 2005 Location: Round Rock, TX Posts: 1,100	Re: See any other parts off this you want? wouldn't mind looking at tank in person. Send a PM with number and I will call you this week. thanks, Thomas __________________ Soon to be selling all but one, or two... Depends on what the Boss has to say....... 67 GMC Shortbed 454 Project more junk and most of it is for sale



Register or Log In To remove these advertisements.

08-18-2008, 11:58 PM	#20
68 short step Senior Member Join Date: Aug 2005 Location: tulsa OK Posts: 3,070	Re: See any other parts off this you want? could you do 50$ shipped for the driver and pass side door glass and the heater controler (no cables needed)???

08-19-2008, 09:29 AM	#22
northern 85 Registered User Join Date: Mar 2005 Location: Fairfield Maine Posts: 1,759	Re: See any other parts off this you want? How much for the lighter and trim ring shipped to 04937?

08-19-2008, 05:51 PM	#24
68 short step Senior Member Join Date: Aug 2005 Location: tulsa OK Posts: 3,070	Re: See any other parts off this you want? yes im still instrested in both door glass and the holy heater control......when you say slow shipping what do you mean??? (normal ups ground or what?)

08-19-2008, 06:01 PM	#25
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: See any other parts off this you want? Keep me posted if you decide to cut up the dash area. __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)

Register or Log In To remove these advertisements.