Need a measurement for crank pulley for Power steering - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Sport/Truck · 08-23-2008, 02:42 PM

I'm trying to figure out why my PS pulley wont match the crank pulley.
Can someone give me the measurement from their harmonic balancer to the center of the power steering belt?
Thanks,
s/t

Sport/Truck · 08-23-2008, 09:37 PM

bump

sandking · 08-23-2008, 09:54 PM

What exactly are you looking for? Are the two pulley's misaligned?

sandking · 08-23-2008, 09:56 PM

If you mean from the face of the harmonic to the center of the PS pulley, mine is 2-3/16

Sport/Truck · 08-23-2008, 10:03 PM

Quote:

Originally Posted by sandking

If you mean from the face of the harmonic to the center of the PS pulley, mine is 2-3/16

Yes, and that would be the outer most pulley with a short water pump.
Is that what you have?
s/t

sandking · 08-23-2008, 10:15 PM

Thats correct.

Sport/Truck · 08-23-2008, 10:36 PM

Thanks I'll measure mine and see if that's what I have.
s/t

08-23-2008, 02:42 PM	#1
Sport/Truck Sierra Grande Club Join Date: Jan 2007 Location: New Mexico USA Posts: 2,433	Need a measurement for crank pulley for Power steering I'm trying to figure out why my PS pulley wont match the crank pulley. Can someone give me the measurement from their harmonic balancer to the center of the power steering belt? Thanks, s/t __________________ 1971 GMC Sierra Grande, 1/2 ton short wide, original 4 bolt 010 020 block & heads. (matching #'s). 383 stroker, SMI q jet 750 cfm, Lunati Voodoo 60102 cam, Scorpion roller rockers, Spin Tech pro street mufflers with X pipe.

08-23-2008, 09:37 PM	#2
Sport/Truck Sierra Grande Club Join Date: Jan 2007 Location: New Mexico USA Posts: 2,433	Re: Need a measurement for crank pulley for Power steering bump __________________ 1971 GMC Sierra Grande, 1/2 ton short wide, original 4 bolt 010 020 block & heads. (matching #'s). 383 stroker, SMI q jet 750 cfm, Lunati Voodoo 60102 cam, Scorpion roller rockers, Spin Tech pro street mufflers with X pipe.

08-23-2008, 09:54 PM	#3
sandking .....I am working on it..... Join Date: Jul 2007 Location: Anaheim Hills, Ca Posts: 960	Re: Need a measurement for crank pulley for Power steering What exactly are you looking for? Are the two pulley's misaligned? __________________ . . . . . View my build thread HERE

08-23-2008, 09:56 PM	#4
sandking .....I am working on it..... Join Date: Jul 2007 Location: Anaheim Hills, Ca Posts: 960	Re: Need a measurement for crank pulley for Power steering If you mean from the face of the harmonic to the center of the PS pulley, mine is 2-3/16 __________________ . . . . . View my build thread HERE

08-23-2008, 10:15 PM	#6
sandking .....I am working on it..... Join Date: Jul 2007 Location: Anaheim Hills, Ca Posts: 960	Re: Need a measurement for crank pulley for Power steering Thats correct. __________________ . . . . . View my build thread HERE

08-23-2008, 10:36 PM	#7
Sport/Truck Sierra Grande Club Join Date: Jan 2007 Location: New Mexico USA Posts: 2,433	Re: Need a measurement for crank pulley for Power steering Thanks I'll measure mine and see if that's what I have. s/t __________________ 1971 GMC Sierra Grande, 1/2 ton short wide, original 4 bolt 010 020 block & heads. (matching #'s). 383 stroker, SMI q jet 750 cfm, Lunati Voodoo 60102 cam, Scorpion roller rockers, Spin Tech pro street mufflers with X pipe.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.