|
08-29-2008, 07:10 PM
|
#1 |
|
Lowered in Cleveland
Join Date: Feb 2006
Location: Cleveland
Posts: 120
|
Cab floor repalcement
I have posted some details on my 63 or 65 cab selection for my truck. Now the problem I am have is the floor to the 63 is gone. I have no pictures, still no camera. The 65 is a southern cab and only needs minor repair. My thought is to cut the entire firewall, A piller then cut where the rear of the rocker meet and finally cut the lip where the floorboards meet the lower back of the cab. How does this sound to the seasoned pro.
|
|
|
|
08-29-2008, 07:48 PM
|
#2 |
|
Lowered in Cleveland
Join Date: Feb 2006
Location: Cleveland
Posts: 120
|
Re: Cab floor repalcement
How would I make the 65 into a 63?
|
|
|
|
|
08-30-2008, 05:13 AM
|
#3 |
|
Cantankerous Geezer
Join Date: Aug 2002
Location: Bel Aire, KS
Posts: 6,264
|
Re: Cab floor repalcement
GMC Paul shows the same floor pan for the 63-66 years.
http://www.gmcpauls.com/Patch-PANELS.htm
__________________
Fred There is no such thing as too much cam...just not enough engine. 
|
|
|
|
|
08-30-2008, 12:30 PM
|
#4 |
|
KOFFIN DRAGGER
Join Date: Jan 2008
Location: st.anthony Idaho
Posts: 864
|
Re: Cab floor repalcement
It sounds like alot of work to keep the knee knocker cab, If you have a clean newer cab I would do a cab swap rather than cut up a good one in hopes of saving a bad one. Then you could work on the 63 cab off the truck and rebuild it, then set it back on when its done.
__________________
If the life I live dont kill me, then I guess I'll never die! New updated stuff at www.kdrodworks.com My site still needs help, web guys and gals pm me. the best guys in the whole world: sweet70beast, jonzcustomshop, runninlow, captainfab, and the one I havent met yet, joe231 |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
