cab and doors for sale - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**MJN** · 11-16-2002, 07:10 PM

Cab and doors from '80 GMC c-15 Sierra Classic. From texas truck, dual tanks, a/c, power locks, clock dash with guages and tilt auto column. good glass, has been repainted, stripped it down for paint, have all parts for interior that are included (dark blue) also complete wiring harness, master cylinder and anything else that comes with a cab. Two rust spots, right side rocker seam and bottom drivers front windlace screw hole, very fixable not serious. First $500 takes it. Comes with your choice of '79 or '80 (with square headlights) radiator supports, both in good shape, '80 comes with lower trim. Also a RH front fender, good for driver. Can also throw in some other goodies.
I also have lots of parts for these trucks. If you need something let me know.

bigblock73 · 11-16-2002, 07:28 PM

MJN, set you a PM.

-Jeff

**MJN** · 12-11-2002, 11:45 PM

Have pictures available, can email them upon request.

bigblock73 · 01-02-2003, 08:51 AM

MJN, have you decided if you want to sell the doors only?

-Jeff

**MJN** · 01-02-2003, 10:49 AM

Sorry, I decided to sell the whole thing, Thanks
Eric

76 k20 · 01-04-2003, 08:47 AM

eric, sent you a pm
Kyle

**MJN** · 03-11-2003, 08:42 PM

TTT

MYBIG454 · 03-11-2003, 09:52 PM

I HAVE AN 86 CAB THAT I NEED DOORS FOR

billsbowtie · 03-11-2003, 10:03 PM

mybig454 i sent you a pm on the 67 68 grille

**MJN** · 03-12-2003, 02:29 PM

MYBIG454, if you know anyone that needs a cab, then the doors are yours, but I would really like to sell this complete so I'm not stuck with a cab. Thanks

11-16-2002, 07:10 PM	#1
MJN Registered User Join Date: Feb 2000 Location: Maquoketa, Ia/ Orr, Mn Posts: 3,051	cab and doors for sale Cab and doors from '80 GMC c-15 Sierra Classic. From texas truck, dual tanks, a/c, power locks, clock dash with guages and tilt auto column. good glass, has been repainted, stripped it down for paint, have all parts for interior that are included (dark blue) also complete wiring harness, master cylinder and anything else that comes with a cab. Two rust spots, right side rocker seam and bottom drivers front windlace screw hole, very fixable not serious. First $500 takes it. Comes with your choice of '79 or '80 (with square headlights) radiator supports, both in good shape, '80 comes with lower trim. Also a RH front fender, good for driver. Can also throw in some other goodies. I also have lots of parts for these trucks. If you need something let me know. Last edited by MJN; 03-11-2003 at 08:40 PM.

12-11-2002, 11:45 PM	#3
MJN Registered User Join Date: Feb 2000 Location: Maquoketa, Ia/ Orr, Mn Posts: 3,051	Have pictures available, can email them upon request. __________________ '51 South Bend Model "9A" '56 Chevy 3600 NAPCO '74 Chevy Cheyenne Super K20-restored on 37's '72 GMC Sierra Custom K2500- in progress '08 GMC Envoy Denali '12 GMC Sierra 2500HD Denali '17 GMC Yukon XL VCCA member #58596 http://www.nohrco.com

01-02-2003, 10:49 AM	#5
MJN Registered User Join Date: Feb 2000 Location: Maquoketa, Ia/ Orr, Mn Posts: 3,051	Sorry, I decided to sell the whole thing, Thanks Eric __________________ '51 South Bend Model "9A" '56 Chevy 3600 NAPCO '74 Chevy Cheyenne Super K20-restored on 37's '72 GMC Sierra Custom K2500- in progress '08 GMC Envoy Denali '12 GMC Sierra 2500HD Denali '17 GMC Yukon XL VCCA member #58596 http://www.nohrco.com

03-11-2003, 10:03 PM	#9
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	mybig454 i sent you a pm on the 67 68 grille __________________ i have 67/72 chevy truck parts f/s.

11-16-2002, 07:28 PM	#2
bigblock73 yeller Join Date: Oct 2001 Location: Twin Cities Posts: 13,824	MJN, set you a PM. -Jeff

01-02-2003, 08:51 AM	#4
bigblock73 yeller Join Date: Oct 2001 Location: Twin Cities Posts: 13,824	MJN, have you decided if you want to sell the doors only? -Jeff

01-04-2003, 08:47 AM	#6
76 k20 Registered User Join Date: Nov 2002 Location: cold, Minnesota Posts: 37	eric, sent you a pm Kyle

03-11-2003, 08:42 PM	#7
MJN Registered User Join Date: Feb 2000 Location: Maquoketa, Ia/ Orr, Mn Posts: 3,051	TTT

03-11-2003, 09:52 PM	#8
MYBIG454 Registered User Join Date: Mar 2003 Location: NORTHERN MICHIGAN Posts: 4	I HAVE AN 86 CAB THAT I NEED DOORS FOR

03-12-2003, 02:29 PM	#10
MJN Registered User Join Date: Feb 2000 Location: Maquoketa, Ia/ Orr, Mn Posts: 3,051	MYBIG454, if you know anyone that needs a cab, then the doors are yours, but I would really like to sell this complete so I'm not stuck with a cab. Thanks



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.