Can someone post pic of 67-72 1 piece rear driveshaft - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Yukon Jack** · 09-11-2008, 05:44 PM

Could someone post a pic of a 1 piece rear driveshaft in a 67-72 K10 or K20 (not a K5) that preferrably has an NP205?

Would appreciate seeing an over-all pic, a pic of the shaft near the slip yoke and maybe a pic of the crossmember that is above the driveshaft at about the rear edge of the cab.

**88JRFAN** · 09-11-2008, 08:56 PM

Here is a pic of a driveline. No pic of crossmember, sorry. Are you wanting one? Would be cheaper to buy one than to have yours redone. This one can be bought. Daren

Conroe trucker · 09-11-2008, 09:48 PM

I am pulling the driveshaft and axles off my frame in the AM. What do you want exactly and I will take it for you?

**Yukon Jack** · 09-12-2008, 07:45 AM

A pic of the crossmember that is above the driveshaft at about the rear edge of the cab would be helpful to see.

Conroe trucker · 09-12-2008, 09:14 AM

Will do.
I have the cab off so I will shoot it form several angles and post them.

**CPNE** · 09-12-2008, 10:16 AM

is this the frame part you need a pic of?

**Ridgeback** · 09-12-2008, 01:16 PM

Hope these help.

Conroe trucker · 09-12-2008, 04:05 PM

Looks like you are taken care of.

Conroe trucker · 09-12-2008, 04:29 PM

If these are too small I can direct email larger pics.

71 super · 09-12-2008, 05:51 PM

Here are some more...

**Yukon Jack** · 09-12-2008, 09:17 PM

I think the pics posted show me what I'm wanting to see -thanks guys!

**Yukon Jack** · 09-13-2008, 08:03 AM

As you can see, I have a crossmember that isn't on any of the frames pictured above - this crossmember is directly below the back edge of the cab. The top crossmember is what the carrier bearing drop down bracket attached to

And the bottom seperate crossmember has a transfer case skid plate

Last night I looked at a buddy's 1970 1 ton that he converted to 4wd and he doesn't have the top crossmember that I have and his carrier bearing is attached to the lower crossmember.

msgross · 09-13-2008, 08:22 AM

I know you got your pics but here's a SWB

**Yukon Jack** · 09-13-2008, 04:54 PM

That's good to see as it shows the bottom crossmember that we both have but yours does not have the one above it. I'm thinking the driveshaft might hit the top one so I might have to get rid of it or at least clearance it a bit. Sure hope I don't have to get rid of it completely, I hate getting rid of rivits!

09-11-2008, 05:44 PM	#1
Yukon Jack Post Whore Join Date: Feb 2000 Location: Rose Hill, KS, USA Posts: 12,683	Can someone post pic of 67-72 1 piece rear driveshaft Could someone post a pic of a 1 piece rear driveshaft in a 67-72 K10 or K20 (not a K5) that preferrably has an NP205? Would appreciate seeing an over-all pic, a pic of the shaft near the slip yoke and maybe a pic of the crossmember that is above the driveshaft at about the rear edge of the cab. __________________ 1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14

09-11-2008, 08:56 PM	#2
88JRFAN LET'S GO RACIN' Join Date: Oct 2007 Location: SALINA,KS Posts: 1,212	Re: Can someone post pic of 67-72 1 piece rear driveshaft Here is a pic of a driveline. No pic of crossmember, sorry. Are you wanting one? Would be cheaper to buy one than to have yours redone. This one can be bought. Daren Attached Images __________________ Daren 04 Chevy Extend cab 2500HD 6.0 Liter 4x4 71 CHEVY 3/4 4X4 402 BB, th400/np205, dana44/eaton ho52 w/4:10-TOY Rip El Jay RIP BOBBO'S MOM Last edited by 88JRFAN; 09-11-2008 at 09:00 PM.

09-11-2008, 09:48 PM	#3
Conroe trucker SWBs: 67 2x4, 67 4x4, 70 4x4 Join Date: Nov 2007 Location: Conroe, TX Posts: 483	Re: Can someone post pic of 67-72 1 piece rear driveshaft I am pulling the driveshaft and axles off my frame in the AM. What do you want exactly and I will take it for you? __________________ FINISHED Project thread: 67 SWB 4x4 FINISHED Project thread: 67 SWB 6 cyl cruiser Project thread: Road Toad 70 SWB Step, 4x4, 292, 3OT 01 C5 convertable 08 Z06

09-12-2008, 07:45 AM	#4
Yukon Jack Post Whore Join Date: Feb 2000 Location: Rose Hill, KS, USA Posts: 12,683	Re: Can someone post pic of 67-72 1 piece rear driveshaft A pic of the crossmember that is above the driveshaft at about the rear edge of the cab would be helpful to see. __________________ 1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14

09-12-2008, 09:14 AM	#5
Conroe trucker SWBs: 67 2x4, 67 4x4, 70 4x4 Join Date: Nov 2007 Location: Conroe, TX Posts: 483	Re: Can someone post pic of 67-72 1 piece rear driveshaft Will do. I have the cab off so I will shoot it form several angles and post them. __________________ FINISHED Project thread: 67 SWB 4x4 FINISHED Project thread: 67 SWB 6 cyl cruiser Project thread: Road Toad 70 SWB Step, 4x4, 292, 3OT 01 C5 convertable 08 Z06

09-12-2008, 10:16 AM	#6
CPNE Resident Curmudgeon Join Date: Dec 1999 Location: NH Posts: 6,664	Re: Can someone post pic of 67-72 1 piece rear driveshaft is this the frame part you need a pic of? Attached Images __________________ Currently on or near the homestead: 67 Chevy SWB 2WD stepside 350/3 on tree (Pat's) 67 GMC SWB 2WD Fleet 402/auto (Brian's under construction) 67 Chevy 3/4 ton 2WD 402/auto (Business Hauler) 67 Chevy 1 ton dually 2WD 396/4 speed (Former business hauler, Needs TLC) 68 Chevy 1/2 ton Suburban 2WD 250 six/3 on tree (Brian's Needs TLC) 70 Chevy 3/4 ton 4WD 350/4 speed (Pat's - Disguised as a 68 GMC) 71 Chevy SWB stepside (Crushed by tree - parts donor) 72 Chevy 3/4 ton 4WD (Parts donor) 72 Chevy 3/4 ton 4WD Suburban (Parts Donor) 72 GMC 3/4 ton 4WD 292 six/4 speed (Mine - Disguised as a 67 GMC) 81 GMC 4WD Dually Dump Body 350/4 speed (Business Hauler) 82 Camaro Z/28 355/Super T-10 (Pat's toy) 93 Caprice 9C1 (Brian's Cop Car) 02 Toyota Camry (Reliable but a souless steel and plastic hulk) 2011 2SS RS Camaro M6 Factory Hurst Shifter Maybe I need to sell some of this crap Yet another Bozo with a sawz-all

09-12-2008, 01:16 PM	#7
Ridgeback Senior Member Join Date: Mar 2003 Location: Virginia Posts: 809	Re: Can someone post pic of 67-72 1 piece rear driveshaft Hope these help. Attached Images Last edited by Ridgeback; 09-12-2008 at 01:17 PM.

09-12-2008, 04:05 PM	#8
Conroe trucker SWBs: 67 2x4, 67 4x4, 70 4x4 Join Date: Nov 2007 Location: Conroe, TX Posts: 483	Re: Can someone post pic of 67-72 1 piece rear driveshaft Looks like you are taken care of. __________________ FINISHED Project thread: 67 SWB 4x4 FINISHED Project thread: 67 SWB 6 cyl cruiser Project thread: Road Toad 70 SWB Step, 4x4, 292, 3OT 01 C5 convertable 08 Z06

09-12-2008, 04:29 PM	#9
Conroe trucker SWBs: 67 2x4, 67 4x4, 70 4x4 Join Date: Nov 2007 Location: Conroe, TX Posts: 483	Re: Can someone post pic of 67-72 1 piece rear driveshaft If these are too small I can direct email larger pics. Attached Images __________________ FINISHED Project thread: 67 SWB 4x4 FINISHED Project thread: 67 SWB 6 cyl cruiser Project thread: Road Toad 70 SWB Step, 4x4, 292, 3OT 01 C5 convertable 08 Z06

09-12-2008, 05:51 PM	#10
71 super Registered User Join Date: Sep 2005 Location: Canton North carolina Posts: 3,079	Re: Can someone post pic of 67-72 1 piece rear driveshaft Here are some more... __________________ 67 blue step side- bb 68 gold and white swb cst anniversary 68 custom swb hot rod Ls swap 69 swb cst 6 cylinder/ overdrive 69 black/black cst bb swb 70 orange and white cst Canada built truck swb bb 71 black and white super swb bb 71 red and white super swb 72 green and white super swb 4x4 62 nova wagon 400 series Ls swapped 68 Camaro 327/4 speed- 1 owner, original paint 66 Volkswagen bettle 69 auto stick Volkswagen Beetle

09-12-2008, 09:17 PM	#11
Yukon Jack Post Whore Join Date: Feb 2000 Location: Rose Hill, KS, USA Posts: 12,683	Re: Can someone post pic of 67-72 1 piece rear driveshaft I think the pics posted show me what I'm wanting to see -thanks guys! __________________ 1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14

09-13-2008, 08:03 AM	#12
Yukon Jack Post Whore Join Date: Feb 2000 Location: Rose Hill, KS, USA Posts: 12,683	Re: Can someone post pic of 67-72 1 piece rear driveshaft As you can see, I have a crossmember that isn't on any of the frames pictured above - this crossmember is directly below the back edge of the cab. The top crossmember is what the carrier bearing drop down bracket attached to And the bottom seperate crossmember has a transfer case skid plate Last night I looked at a buddy's 1970 1 ton that he converted to 4wd and he doesn't have the top crossmember that I have and his carrier bearing is attached to the lower crossmember. __________________ 1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14

09-13-2008, 08:22 AM	#13
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: Can someone post pic of 67-72 1 piece rear driveshaft I know you got your pics but here's a SWB Attached Images __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer"

09-13-2008, 04:54 PM	#14
Yukon Jack Post Whore Join Date: Feb 2000 Location: Rose Hill, KS, USA Posts: 12,683	Re: Can someone post pic of 67-72 1 piece rear driveshaft That's good to see as it shows the bottom crossmember that we both have but yours does not have the one above it. I'm thinking the driveshaft might hit the top one so I might have to get rid of it or at least clearance it a bit. Sure hope I don't have to get rid of it completely, I hate getting rid of rivits! __________________ 1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.