what would you offer for it......... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

QKENUF4U · 09-12-2008, 12:53 AM

ok went and checked it out today. didnt even talk to the lady that ownes it cause its way to far gone for me. both rockers are trash, bed has some damage that would be hard to fix (around tail lights etc.) floos might be ok but i only looked at rockers and inner rockers /underneath before i got back in my truck and left. just way to much work for me. ill spend more money and get a truck thats already had this stuff done or already done all together. just not worth my time/money to screw with the rust.
might be worth while to some of you to check it out.

602 386 0160 in phoenix
later
lance

**El Jay** · 09-12-2008, 12:57 AM

Around here in Nor Cal, that might be a tad high, but not really too far out of line.
Just my .02.

wHATANERD · 09-12-2008, 03:03 AM

That seems to be inline with the going rate. Also what engine and transmission does it have?

big_al_71 · 09-12-2008, 07:49 AM

Downhere in florida is in the ball park for the asking price just depends how much rust is on it.
$2,500 to $ 3,000 my opinion of course I need to know more details like others have said eng? tranny? etc..

65-72 chevytoys · 09-12-2008, 07:53 AM

I sold mine a few months ago for $2,500 and it seems to be in a similar condition. So it seems a little high unless it a has a big block.

c10addict · 09-12-2008, 08:07 AM

In the lovely rust belt of Pittsburgh Pa that truck is a dream find and worth $5000.00

**70cst** · 09-12-2008, 10:04 AM

Open for business as I was in error in locking this thread. I apologize.

whatnow123 · 09-12-2008, 10:13 AM

Good luck finding something that doesn't need rockers however, being one that has done it, it's pretty strait forward and not as difficult as it seems. I wouldn't not buy one becuase it needed rockers if everything else was worth the price.

cdowns · 09-12-2008, 10:19 AM

i'd wait it out. around here money is really tight and large vehicles and trucks are really a hard sell. you might b able to wait a month or two then when its getting into the holiday time offer a loball $1500 or so for it// but if you're in love with the thing and feel like it's a must do deal start around $2700 with your first offer and maybe be willing to gradually increase to a max of $3000

jkaylor68gmc · 09-12-2008, 10:22 AM

thats about 1500 too high in TN, I think you might go low with cash and work up.

kingp411 · 09-12-2008, 11:15 AM

i just paid that for mine, in about the same shape, i need rockers and tlc, and that was after talking him down

**Classic Heartbeat** · 09-12-2008, 11:27 AM

Without seeing the whole truck it's hard to say. However you would be hard pressed to find an unrestored truck without rusty rockers for that price. Not impossible, but hard pressed. WES

67ChevyRedneck · 09-12-2008, 11:48 AM

*Looks* like a nice truck. $2,500-3,000 seems fair if it runs good. Not a "deal" but a fair price.

Go up to NY, that would be a 5K truck

QKENUF4U · 09-12-2008, 01:26 PM

actually my first 71 in my avatar was perfect in those areas other than dents. no rust holes anywhere, no rust on frame or anywhere else. CLEAN CLEAN CLEAN !! had to sell it when the fiance broke it off with me after 7 3/4yrs.
as for being worth more back east ... ya i know im originally from "rainsylvania the kind of rust" state (pennstate area)
to be exact there are two of these trucks in my dads barn rotting away. 2 wd short bed and a 3/4 ton long bed

PHAT TONY · 09-12-2008, 09:22 PM

OH MY GOOD GOLLY GOSH!! In Alberta that truck would fetch 5-6 grand in 20 minutes!!!

Southpa · 09-12-2008, 11:17 PM

Rotten rockers can mean more, those are only the visible areas. Consider adjacent parts like inner rockers, floor, door pillars, corners and cab supports. Those kinds of things can severely knock your price down. I have to admit that if I knew then what I now now I might not even own my particular truck. I'm just glad I have some welding skills! I still have the nasty pictures!

Another spot to look at is the bolt channels holding the rear wheel well tubs. I've seen them entirely gone but with still a perfect looking seam up top.

D'Animal · 09-12-2008, 11:26 PM

IMHO

Way high for a California rig.

It's also missing the other two headlights.

QKENUF4U · 09-13-2008, 01:20 AM

Quote:

Originally Posted by Southpa

Rotten rockers can mean more, those are only the visible areas. Consider adjacent parts like inner rockers, floor, door pillars, corners and cab supports. .

ya i know exactly why im not all hot and bothered about it. but i am still gonna go check it out sunday after church.
thanks
lance

09-12-2008, 12:53 AM	#1
QKENUF4U Senior Member Join Date: Jan 2005 Location: SUNNY WARM BIKE RIDING COTTONWOOD ARIZONA Posts: 2,097	update on 71 i was gonna look at............ ok went and checked it out today. didnt even talk to the lady that ownes it cause its way to far gone for me. both rockers are trash, bed has some damage that would be hard to fix (around tail lights etc.) floos might be ok but i only looked at rockers and inner rockers /underneath before i got back in my truck and left. just way to much work for me. ill spend more money and get a truck thats already had this stuff done or already done all together. just not worth my time/money to screw with the rust. might be worth while to some of you to check it out. 602 386 0160 in phoenix later lance Attached Images Last edited by QKENUF4U; 09-14-2008 at 07:12 PM.

09-12-2008, 12:57 AM	#2
El Jay Gone to greener pastures Join Date: May 2007 Location: Gateway to the Delta Posts: 7,354	Re: what would you offer for it......... Around here in Nor Cal, that might be a tad high, but not really too far out of line. Just my .02. __________________ '69 Chevy 1/2 T LWB Stepper: Daily Beater '72 GMC 3/4 T Fleet: Another Daily Beater '72 Plymouth Gran Coupe: ? "Ah women. They make the highs higher and the lows more frequent." Friedrich Nietzsche "Never kick a fresh turd on a hot day." Harry S. Truman GUN CONTROL: Never having to say, "I missed you." Always fire two warning shots into your attacker's chest area before putting a bullet between his eyes. Paraphrased from Louis Awerbuck

09-12-2008, 03:03 AM	#3
wHATANERD Registered User Join Date: Mar 2003 Location: Uvalde, Tx Posts: 407	Re: what would you offer for it......... That seems to be inline with the going rate. Also what engine and transmission does it have? __________________ 1969 C/10 Longbed undergoing rebuild. Old Chevy's Never Die, They Just Rust Around The Edges

09-12-2008, 07:49 AM	#4
big_al_71 Registered User Join Date: Jun 2008 Location: South Florida Posts: 11,375	Re: what would you offer for it......... Downhere in florida is in the ball park for the asking price just depends how much rust is on it. $2,500 to $ 3,000 my opinion of course I need to know more details like others have said eng? tranny? etc.. __________________ Get your facts first, and then you can distort them as much as you please!!!!!. Sylvester's build thread >>>http://67-72chevytrucks.com/vboard/s...ht=big+rebuild

09-12-2008, 07:53 AM	#5
65-72 chevytoys Registered User Join Date: Dec 2006 Location: Wesley Chapel, Florida Posts: 1,113	Re: what would you offer for it......... I sold mine a few months ago for $2,500 and it seems to be in a similar condition. So it seems a little high unless it a has a big block. __________________ 2004 Chevy Silverado 1500LS SWB 5.3L 2004 Corvette Z16 #770 Wish I had not sold 72 blazer

09-12-2008, 08:07 AM	#6
c10addict Registered User Join Date: Aug 2007 Location: pittsburgh pa Posts: 1,970	Re: what would you offer for it......... In the lovely rust belt of Pittsburgh Pa that truck is a dream find and worth $5000.00 __________________ 68 C10 Shorty TPI,Bagged, and all the good stuff. Classic trucks feature June 06, On the cover of Jegs Christmas Catalog 08 67 C10 Shorty Shop truck project Bagged and Z'd under destruction and getting nowhere fast. 64 C10 Shop Truck/Daily driver, Bagged, Dropmember, SOLD!!!! Gone but not forgotten.. 54 GMC under the knife getting a S10 chassis swap and bagged. See my build thread... 07 GMC Sierra 5/7 drop, 22's and 24's Air ride on my mind.. http://67-72chevytrucks.com/vboard/s...d.php?t=339340 See pics of my trucks in my profile

09-12-2008, 10:04 AM	#7
70cst Senior Member Join Date: Feb 2001 Location: New Madison, Ohio Posts: 21,365	Re: what would you offer for it......... Open for business as I was in error in locking this thread. I apologize. __________________ A husband can be right...or...A husband can be happy. 67-72 Chevy and GMC Trucks...The Classic Truck for the Classic Folk. 1970 CST Two tone green, 402BB, 400 Automatic, Tach, Buckets, AC, AM-FM, Tilt, GM CB, GM 8 Tract, LWB, etc JOHN 17:3...The better side of "LIFE" Remember: Everyday is a good day...Some are just gooder!

09-12-2008, 10:13 AM	#8
whatnow123 Registered User Join Date: Oct 2006 Location: Arizona Posts: 835	Re: what would you offer for it......... Good luck finding something that doesn't need rockers however, being one that has done it, it's pretty strait forward and not as difficult as it seems. I wouldn't not buy one becuase it needed rockers if everything else was worth the price. __________________ 67 Short Step, 355, 700R 4.11 posi rear, 4/6 drop Discs on all 4 corners. Build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=219094

09-12-2008, 10:19 AM	#9
cdowns Senior Member Join Date: Jan 2003 Location: daytonabeach Posts: 22,956	Re: what would you offer for it......... i'd wait it out. around here money is really tight and large vehicles and trucks are really a hard sell. you might b able to wait a month or two then when its getting into the holiday time offer a loball $1500 or so for it// but if you're in love with the thing and feel like it's a must do deal start around $2700 with your first offer and maybe be willing to gradually increase to a max of $3000 __________________ 71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY

09-12-2008, 10:22 AM	#10
jkaylor68gmc Senior Member Join Date: Dec 2005 Location: TN Posts: 2,448	Re: what would you offer for it......... thats about 1500 too high in TN, I think you might go low with cash and work up. __________________ 1947 International KB-1 1957 Chevy Bel-Air riding low 1962 swb fleetside 2002 Chevrolet Silverado 7-inch lift on 35 Daily driver 2016 Chevy Tahoe Better halves ride

09-12-2008, 11:15 AM	#11
kingp411 Registered User Join Date: Jun 2008 Location: las vegas, nevada Posts: 19	Re: what would you offer for it......... i just paid that for mine, in about the same shape, i need rockers and tlc, and that was after talking him down __________________ 1971/67 c10 short bed-cleaning up now-sold 1970 chevelle-put on hold to play with new truck 1968 nova-tube chassis drag car 2006 1500hd-gets me to work 2005 honda pilot-wifes baby hauler

09-12-2008, 11:27 AM	#12
Classic Heartbeat Project Junkie! Fishing Poor!! Join Date: Dec 1999 Location: Olympia,Wa. 98512 Posts: 10,770	Re: what would you offer for it......... Without seeing the whole truck it's hard to say. However you would be hard pressed to find an unrestored truck without rusty rockers for that price. Not impossible, but hard pressed. WES __________________ On-line catolog Classic Heartbeat Pickup Parts WEHEPP@comcast.net Call us Toll Free (888) 338-2502 Like Us on Facebook No appointment necessary. 72 BB Chevy Custom Deluxe / Custom Camper 67 I-6 (Soon to be 5.7 LS1) Panel 68 BB Chevy Short Bed 72 6.0 LQ9 Short Bed Chevy 4X4 Olympia's fastest growing truck parts supplier. Olympia's home for Wayward Chevys

09-12-2008, 11:48 AM	#13
67ChevyRedneck Hittin E-Z Street on Mud Tires Join Date: Nov 2004 Location: Greenville, SC Posts: 23,090	Re: what would you offer for it......... Looks like a nice truck. $2,500-3,000 seems fair if it runs good. Not a "deal" but a fair price. Go up to NY, that would be a 5K truck __________________ Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications!

09-12-2008, 01:26 PM	#14
QKENUF4U Senior Member Join Date: Jan 2005 Location: SUNNY WARM BIKE RIDING COTTONWOOD ARIZONA Posts: 2,097	Re: what would you offer for it......... actually my first 71 in my avatar was perfect in those areas other than dents. no rust holes anywhere, no rust on frame or anywhere else. CLEAN CLEAN CLEAN !! had to sell it when the fiance broke it off with me after 7 3/4yrs. as for being worth more back east ... ya i know im originally from "rainsylvania the kind of rust" state (pennstate area) to be exact there are two of these trucks in my dads barn rotting away. 2 wd short bed and a 3/4 ton long bed

09-12-2008, 09:22 PM	#15
PHAT TONY Registered User Join Date: Aug 2008 Location: Red Deer ab canada Posts: 1,250	Re: what would you offer for it......... OH MY GOOD GOLLY GOSH!! In Alberta that truck would fetch 5-6 grand in 20 minutes!!!



Register or Log In To remove these advertisements.

09-12-2008, 11:17 PM	#16
Southpa Registered User Join Date: May 2000 Location: Victoria, BC, Canada Posts: 2,410	Re: what would you offer for it......... Rotten rockers can mean more, those are only the visible areas. Consider adjacent parts like inner rockers, floor, door pillars, corners and cab supports. Those kinds of things can severely knock your price down. I have to admit that if I knew then what I now now I might not even own my particular truck. I'm just glad I have some welding skills! I still have the nasty pictures! Another spot to look at is the bolt channels holding the rear wheel well tubs. I've seen them entirely gone but with still a perfect looking seam up top. __________________ 1970 GMC 1500 Custom Original 350/TH350 Victoria, BC, Canada You can wish in one hand and crap in the other. See which one gets filled first. Last edited by Southpa; 09-12-2008 at 11:23 PM.

09-12-2008, 11:26 PM	#17
D'Animal Registered User Join Date: Aug 2008 Location: Exeter, Ca Posts: 100	Re: what would you offer for it......... IMHO Way high for a California rig. It's also missing the other two headlights.

Register or Log In To remove these advertisements.