is this part reproduced - The 1947 - Present Chevrolet & GMC Truck Message Board Network

DJH · 09-14-2008, 10:42 AM

I seem to have lost the piece that bolts to the lower front door pillar and floor support ( 2 3/8 bolt holes and one aprox. 7/8 hole) is this part remade?

**Classic Heartbeat** · 09-14-2008, 01:47 PM

Sorry, but it is not. WES

DJH · 09-14-2008, 01:50 PM

does it have a name so I can find one?

Sinisterspeed · 09-14-2008, 01:57 PM

Picture of it would help, Or where it goes. I might have one laying around if I knew what one it was I could go look for ya.

msgross · 09-14-2008, 02:02 PM

pic?

DJH · 09-14-2008, 02:59 PM

it goes behind this replacement piece.

msgross · 09-14-2008, 03:03 PM

They make inner rockers, doesn't that go between that and the floor support? Or do you mean the part above my picture where the lower door hinge mounts?

It's just a flat piece of steel though... Do you have a pic of your floor now?

**truckdude239** · 09-14-2008, 03:23 PM

please remember any parts selling on here will get it locked

msgross · 09-14-2008, 03:29 PM

Quote:

Originally Posted by truckdude239

please remember any parts selling on here will get it locked

???

who's selling? he's looking for a replacement part from what I see...

**truckdude239** · 09-14-2008, 03:51 PM

Quote:

Originally Posted by Sinisterspeed

Picture of it would help, Or where it goes. I might have one laying around if I knew what one it was I could go look for ya.

i am reminding because of this post right here

DJH · 09-14-2008, 03:52 PM

I have a pic but cant seem to post it.

It has the same shape as the bottom of the front pillar but has heavier stamped area were the front fender bolts to it.

msgross · 09-14-2008, 04:14 PM

You might be talking about the piece that bolts to the back the one that you posted...

Be sure to make the pics smaller to post, use MS paint or another editor to resize them...

**truckdude239** · 09-14-2008, 04:21 PM

upload to putfile.com or some hosting site. might make it easlier then copy and paste the code here that they give you

msgross · 09-14-2008, 05:26 PM

I know what part you are talking about now... It looks just like the eye for that part with two bolt holes... It goes behind the piece that I showed. Not all trucks had them, my 68 didn't. It could have originally but I think that was a newer thing... i think it's only a reinforcement anyway. Nobody makes them like stated above though... You could use that repop part and design your own though..

DJH · 09-14-2008, 06:35 PM

I can just fab one up I just thought if they were re made it would save some time. thanks Dave

09-14-2008, 10:42 AM	#1
DJH Registered User Join Date: Sep 2002 Location: Franksville WI 53126 Posts: 56	is this part reproduced I seem to have lost the piece that bolts to the lower front door pillar and floor support ( 2 3/8 bolt holes and one aprox. 7/8 hole) is this part remade? __________________ 72 LWB fleet 402 with a/c 68 SWB fleet 327 (frame-off in progress) 03 GMC 1500 collector of 1/18 diecast cars (not NASCAR) Franksville WI (15 mi. South of Milwaukee)

09-14-2008, 01:47 PM	#2
Classic Heartbeat Project Junkie! Fishing Poor!! Join Date: Dec 1999 Location: Olympia,Wa. 98512 Posts: 10,770	Re: is this part reproduced Sorry, but it is not. WES __________________ On-line catolog Classic Heartbeat Pickup Parts WEHEPP@comcast.net Call us Toll Free (888) 338-2502 Like Us on Facebook No appointment necessary. 72 BB Chevy Custom Deluxe / Custom Camper 67 I-6 (Soon to be 5.7 LS1) Panel 68 BB Chevy Short Bed 72 6.0 LQ9 Short Bed Chevy 4X4 Olympia's fastest growing truck parts supplier. Olympia's home for Wayward Chevys

09-14-2008, 01:50 PM	#3
DJH Registered User Join Date: Sep 2002 Location: Franksville WI 53126 Posts: 56	Re: is this part reproduced does it have a name so I can find one? __________________ 72 LWB fleet 402 with a/c 68 SWB fleet 327 (frame-off in progress) 03 GMC 1500 collector of 1/18 diecast cars (not NASCAR) Franksville WI (15 mi. South of Milwaukee)

09-14-2008, 01:57 PM	#4
Sinisterspeed Registered User Join Date: Apr 2008 Location: Gales Creek, Oregon Posts: 619	Re: is this part reproduced Picture of it would help, Or where it goes. I might have one laying around if I knew what one it was I could go look for ya. __________________ There are two kinds of people, those who finish what they start and so on. 70 GMC Longhorn (A.K.A Money Bucket) 57 Chev 3100 05 Chevy LLY Dmax. 67 Chevy Camaro Dad's Budget Build 55 My Longhorn Build

09-14-2008, 02:02 PM	#5
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: is this part reproduced pic? __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer"

09-14-2008, 02:59 PM	#6
DJH Registered User Join Date: Sep 2002 Location: Franksville WI 53126 Posts: 56	Re: is this part reproduced it goes behind this replacement piece. Attached Images __________________ 72 LWB fleet 402 with a/c 68 SWB fleet 327 (frame-off in progress) 03 GMC 1500 collector of 1/18 diecast cars (not NASCAR) Franksville WI (15 mi. South of Milwaukee)

09-14-2008, 03:03 PM	#7
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: is this part reproduced They make inner rockers, doesn't that go between that and the floor support? Or do you mean the part above my picture where the lower door hinge mounts? It's just a flat piece of steel though... Do you have a pic of your floor now? Attached Images __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer" Last edited by msgross; 09-14-2008 at 03:30 PM.

09-14-2008, 03:23 PM	#8
truckdude239 Senior Member Join Date: Sep 2005 Location: Lewisville, Nc Posts: 10,233	Re: is this part reproduced please remember any parts selling on here will get it locked __________________ David fuller Ase Certified Mechanic Click here to help support our board!! 1971 Chevy c-10 under going a 4.8l LSx swap Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=421305 2007 Honda Accord my daily 145kmiles 2002 Honda Accord 4 door With 330k(sisters car) 2005 toyota Avalon 228k( brothers car) 2002 Sububran 5.3 245k 2000 Tahoe 5.3l 378 General manager for Marco's Carwash & lube

09-14-2008, 03:52 PM	#11
DJH Registered User Join Date: Sep 2002 Location: Franksville WI 53126 Posts: 56	Re: is this part reproduced I have a pic but cant seem to post it. It has the same shape as the bottom of the front pillar but has heavier stamped area were the front fender bolts to it. __________________ 72 LWB fleet 402 with a/c 68 SWB fleet 327 (frame-off in progress) 03 GMC 1500 collector of 1/18 diecast cars (not NASCAR) Franksville WI (15 mi. South of Milwaukee)

09-14-2008, 04:14 PM	#12
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: is this part reproduced You might be talking about the piece that bolts to the back the one that you posted... Be sure to make the pics smaller to post, use MS paint or another editor to resize them... __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer"

09-14-2008, 04:21 PM	#13
truckdude239 Senior Member Join Date: Sep 2005 Location: Lewisville, Nc Posts: 10,233	Re: is this part reproduced upload to putfile.com or some hosting site. might make it easlier then copy and paste the code here that they give you __________________ David fuller Ase Certified Mechanic Click here to help support our board!! 1971 Chevy c-10 under going a 4.8l LSx swap Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=421305 2007 Honda Accord my daily 145kmiles 2002 Honda Accord 4 door With 330k(sisters car) 2005 toyota Avalon 228k( brothers car) 2002 Sububran 5.3 245k 2000 Tahoe 5.3l 378 General manager for Marco's Carwash & lube Last edited by truckdude239; 09-14-2008 at 04:21 PM.

09-14-2008, 05:26 PM	#14
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: is this part reproduced I know what part you are talking about now... It looks just like the eye for that part with two bolt holes... It goes behind the piece that I showed. Not all trucks had them, my 68 didn't. It could have originally but I think that was a newer thing... i think it's only a reinforcement anyway. Nobody makes them like stated above though... You could use that repop part and design your own though.. __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer"

09-14-2008, 06:35 PM	#15
DJH Registered User Join Date: Sep 2002 Location: Franksville WI 53126 Posts: 56	Re: is this part reproduced I can just fab one up I just thought if they were re made it would save some time. thanks Dave __________________ 72 LWB fleet 402 with a/c 68 SWB fleet 327 (frame-off in progress) 03 GMC 1500 collector of 1/18 diecast cars (not NASCAR) Franksville WI (15 mi. South of Milwaukee)



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.