Anyone use this 3 speed floor shifter?? PIC inside - The 1947 - Present Chevrolet & GMC Truck Message Board Network

dubie · 11-19-2002, 12:17 PM

Fouond this in the Jegs catalogue and also on Summit Racings site. Anyone here using this shifter or have you heard anything good/bad about them? It's made by Hurst and is made especially for 69 and up chevy trucks and 63 and up Ford models.

yellowgmc · 11-19-2002, 12:25 PM

i bought one, but haven't installed it yet. is that the hurst indy? looks very cool. i just need to get the tranny fixed first. i think it jammed. i'll let you know when i get it in. won't be til spring tho.

barn9 · 11-19-2002, 12:47 PM

Had one on another truck I used to have, and it was great IMO. Never had a problem with it, and it was a major improvement over the column shifter. Makes the truck go faster too, hehe!!

dubie · 11-19-2002, 12:50 PM

Hey yellow, where did you buy yours? Is there a Canadian distributor that I could get one of these from? It's listed at Summit for $79.95, but after the exchange and shipping, it will be around $150 Canadian. I have a floor shift kit here, but it's made by Sparkomatic so you can image how eager I am to install that one

Thanks for the info guys

And Barn9, I could use the extra boost in speed

If only boly on performance was that easy eh

yellowgmc · 11-19-2002, 12:53 PM

i ordered mine from jegs. can't remember exactly how much it cost tho. it was around 75-79. wife threw out my cataloge. i can't wait to get it in. that big chrome stick poking out of the floor will look soooooo cool. and chrome always makes you go faster!! i also ordered a big chrome skull shift knob to be goofy! i don't know about a canadian disttributor tho. might check a big canadian tire. they have a cataologe you can buy that has all sorts of stuff in it. it's like 400 pages!! they can order in all that stuff, for a fee... i always ordered from the us. easier.

meathead95 · 11-19-2002, 01:17 PM

there is one on the parts board for 10$

http://67-72chevytrucks.com/vboard/s...threadid=30743

jay-dawg · 11-19-2002, 01:21 PM

I got that one in the truck. Dad had someone install it when he made it a floor shifter. The throws are really short. It takes some time to get used to finding the gears too.

Jay

yellowgmc · 11-19-2002, 01:22 PM

that's mine exactly.

dubie · 11-19-2002, 01:26 PM

WOO HOO!!! THanks a bunch meathead!!!! I just checked it out and sent him a PM.

**Palf70Step** · 11-19-2002, 02:12 PM

That's (Hurst Indy) what I have in my truck. Like Barn9 stated, I Love it. Much better than the tree. Even with a bench seat. I will say that my wife and I are tall, so the seat is all the way back no matter who is driving. If the bench seat had to come all the way forward, I could see where this shift (any aftermarket) would have a clearance issue with the mounting brackets included in the kit.

But if you'r all above 5'9", then go for it. I got mine through Summit.

barn9 · 11-19-2002, 02:31 PM

Hey dubie, don't you just love it when a plan comes together? LOL! Hope you get it man! Gotta love this board!

dubie · 11-19-2002, 02:57 PM

It's a great feeling bud!!! Slammed67's shifter is spoken for already, but I have a line on another one already

. Sound slike this is the shifter to go with

Palf: I am 6' 1" and the wifey is 5' 7" so the seat will always be all the way back.

I just wish we had a summit dealer in Canada.

No3Fan4Ever · 11-19-2002, 03:38 PM

That's a good shifter; I put one in a 74 F*rd F100 that I had years ago after the column shifter came off in my hand when i hit 2nd gear; I hate it when that happens............

**Palf70Step** · 11-19-2002, 05:31 PM

Hey dubie
They sell the same shifter at our local AutoZones and Advanced Auto Stores. I imagine some of the others probably do also. I think NAPA may carry it also.

slam33 · 11-19-2002, 06:55 PM

The tabs ( the short L with the slots ) on these 2 brackets break if you don't get them mounted right. Tighten them to the trans first then adjust the shifter assembly. If they break the shifter throw will go from a few inches to a couple of feet.

Stano · 11-19-2002, 09:25 PM

Had one of them in my 67 back in highschool, man that thing saw some abuse!LOL Never had a problem with it though. Sliding into second was fun and givin er he77.

**tkeduk8r** · 11-19-2002, 11:22 PM

what are the placement implications if i have buckets and console.... anybody run one like that????
--mike

11-19-2002, 12:17 PM	#1
dubie Registered User Join Date: May 2000 Location: Flin Flon, Manitoba, Canada Posts: 8,853	Anyone use this 3 speed floor shifter?? PIC inside Fouond this in the Jegs catalogue and also on Summit Racings site. Anyone here using this shifter or have you heard anything good/bad about them? It's made by Hurst and is made especially for 69 and up chevy trucks and 63 and up Ford models. __________________ My name's Tim and I'm a truckaholic My 56 Chevy shop truck build http://67-72chevytrucks.com/vboard/s...d.php?t=562795

11-19-2002, 12:25 PM	#2
yellowgmc Getting cabin fever?!?!?! Join Date: Oct 2002 Location: chisholm, mn Posts: 1,679	i bought one, but haven't installed it yet. is that the hurst indy? looks very cool. i just need to get the tranny fixed first. i think it jammed. i'll let you know when i get it in. won't be til spring tho. __________________ Member of the Discs Up Front Club 1972 GMC 1500 1994 F-150 XL 4x4 Tact is for people not whitty enough to be sarcastic

11-19-2002, 12:47 PM	#3
barn9 Half a bubble off! Join Date: Jun 2000 Location: Winfield, Ks, USA Posts: 5,588	Had one on another truck I used to have, and it was great IMO. Never had a problem with it, and it was a major improvement over the column shifter. Makes the truck go faster too, hehe!! __________________ Just call me LB. '71 Cheyenne, 402BB, hauls blondes, brunettes, or redheads.

11-19-2002, 12:50 PM	#4
dubie Registered User Join Date: May 2000 Location: Flin Flon, Manitoba, Canada Posts: 8,853	Hey yellow, where did you buy yours? Is there a Canadian distributor that I could get one of these from? It's listed at Summit for $79.95, but after the exchange and shipping, it will be around $150 Canadian. I have a floor shift kit here, but it's made by Sparkomatic so you can image how eager I am to install that one Thanks for the info guys And Barn9, I could use the extra boost in speed If only boly on performance was that easy eh __________________ My name's Tim and I'm a truckaholic My 56 Chevy shop truck build http://67-72chevytrucks.com/vboard/s...d.php?t=562795

11-19-2002, 12:53 PM	#5
yellowgmc Getting cabin fever?!?!?! Join Date: Oct 2002 Location: chisholm, mn Posts: 1,679	i ordered mine from jegs. can't remember exactly how much it cost tho. it was around 75-79. wife threw out my cataloge. i can't wait to get it in. that big chrome stick poking out of the floor will look soooooo cool. and chrome always makes you go faster!! i also ordered a big chrome skull shift knob to be goofy! i don't know about a canadian disttributor tho. might check a big canadian tire. they have a cataologe you can buy that has all sorts of stuff in it. it's like 400 pages!! they can order in all that stuff, for a fee... i always ordered from the us. easier. __________________ Member of the Discs Up Front Club 1972 GMC 1500 1994 F-150 XL 4x4 Tact is for people not whitty enough to be sarcastic Last edited by yellowgmc; 11-19-2002 at 12:57 PM.

11-19-2002, 01:17 PM	#6
meathead95 computer illiterate Join Date: Jan 2001 Location: Des Moines, IA Posts: 6,440	there is one on the parts board for 10$ http://67-72chevytrucks.com/vboard/s...threadid=30743 __________________ 72 2wd blazer 72 swb 4x4

11-19-2002, 01:21 PM	#7
jay-dawg chevelito Join Date: Jun 2001 Location: Honolulu, HI USA Posts: 1,609	I got that one in the truck. Dad had someone install it when he made it a floor shifter. The throws are really short. It takes some time to get used to finding the gears too. Jay __________________ New deadline...when my son can drive. Aloha from Honolulu, HI

11-19-2002, 01:22 PM	#8
yellowgmc Getting cabin fever?!?!?! Join Date: Oct 2002 Location: chisholm, mn Posts: 1,679	that's mine exactly. __________________ Member of the Discs Up Front Club 1972 GMC 1500 1994 F-150 XL 4x4 Tact is for people not whitty enough to be sarcastic

11-19-2002, 01:26 PM	#9
dubie Registered User Join Date: May 2000 Location: Flin Flon, Manitoba, Canada Posts: 8,853	WOO HOO!!! THanks a bunch meathead!!!! I just checked it out and sent him a PM. __________________ My name's Tim and I'm a truckaholic My 56 Chevy shop truck build http://67-72chevytrucks.com/vboard/s...d.php?t=562795

11-19-2002, 02:12 PM	#10
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 47,251	That's (Hurst Indy) what I have in my truck. Like Barn9 stated, I Love it. Much better than the tree. Even with a bench seat. I will say that my wife and I are tall, so the seat is all the way back no matter who is driving. If the bench seat had to come all the way forward, I could see where this shift (any aftermarket) would have a clearance issue with the mounting brackets included in the kit. But if you'r all above 5'9", then go for it. I got mine through Summit. __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

11-19-2002, 02:31 PM	#11
barn9 Half a bubble off! Join Date: Jun 2000 Location: Winfield, Ks, USA Posts: 5,588	Hey dubie, don't you just love it when a plan comes together? LOL! Hope you get it man! Gotta love this board! __________________ Just call me LB. '71 Cheyenne, 402BB, hauls blondes, brunettes, or redheads.

11-19-2002, 02:57 PM	#12
dubie Registered User Join Date: May 2000 Location: Flin Flon, Manitoba, Canada Posts: 8,853	It's a great feeling bud!!! Slammed67's shifter is spoken for already, but I have a line on another one already . Sound slike this is the shifter to go with Palf: I am 6' 1" and the wifey is 5' 7" so the seat will always be all the way back. I just wish we had a summit dealer in Canada. __________________ My name's Tim and I'm a truckaholic My 56 Chevy shop truck build http://67-72chevytrucks.com/vboard/s...d.php?t=562795

11-19-2002, 03:38 PM	#13
No3Fan4Ever Running on empty Join Date: Aug 2002 Location: Roanoke, Virginia Posts: 1,033	That's a good shifter; I put one in a 74 Frd F100 that I had years ago after the column shifter came off in my hand when i hit 2nd gear; I hate it when that happens............ __________________ _____________________________________________ Tim* We have two rules here at the Rock. Rule #1: No writing on the walls. Rule#2: Obey all rules 70 GMC Sierra Grande "Custom Camper" Longhorn 402 Big Block TH400 PS PB factory AC Posi; 94 Bronco XLT 302, auto;worn out daily driver

11-19-2002, 05:31 PM	#14
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 47,251	Hey dubie They sell the same shifter at our local AutoZones and Advanced Auto Stores. I imagine some of the others probably do also. I think NAPA may carry it also. __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

11-19-2002, 06:55 PM	#15
slam33 Registered User Join Date: Aug 2001 Location: Long Beach, Ca Posts: 1,432	The tabs ( the short L with the slots ) on these 2 brackets break if you don't get them mounted right. Tighten them to the trans first then adjust the shifter assembly. If they break the shifter throw will go from a few inches to a couple of feet. Attached Images __________________ 71 LWB 350/350still working on it but it's going tp be sweet. www.geocities.com/stevemau/slam33page.html " TARGET=_blank>http://www.geocities.com/stevemau/slam33page.html?1004806705410 </A>



Register or Log In To remove these advertisements.

11-19-2002, 09:25 PM	#16
Stano Registered User Join Date: Jul 2000 Location: Mo Posts: 963	Had one of them in my 67 back in highschool, man that thing saw some abuse!LOL Never had a problem with it though. Sliding into second was fun and givin er he77. __________________ New daily driver 96 Chevy K3500 crew cab dually 53,000 miles 350 Vortec 4L80 Nice ride 67 Chevy C-10 LWB Built 350 TH-400 Wifes ride and family rig: 2001 Furd Expedition 5.4 Liter Kickin back in Rolla,Mo. USA "Do the thing you fear most and the death of fear is certain" Mark Twain

11-19-2002, 11:22 PM	#17
tkeduk8r Senior Member Join Date: Apr 2001 Location: Alexandria, MN Posts: 1,462	what are the placement implications if i have buckets and console.... anybody run one like that???? --mike __________________ 63 C20 2WD, 230/SM420/4.11 73K 68 C30 dump truck, 327,SM425,4.56 66K original 68 C10 2WD SWB Stepper, 250/3-tree/3.73 66K.... Wifes 68 Buick Skylark Custom Conv., 350/TH400/2.56 In our family since '79 69 GMC 1500 SWB 2WD, 350/TH350/3.73 posi... 70 K10 SWB 4X4 4-sp,ps, pb, tilt, buckets, console, sliding back window (Need AC parts) WIP 72 Chevy K20 4x4 350/350/205/4.56 donor 72 Vette 350/M21/3.70 posi, triple black and super fast 84 Olds Cutlass Brougham 350/2004r/4.11 was Dad's

Register or Log In To remove these advertisements.