Any Dana 44 steering knuckles for sale? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

sandking · 09-24-2008, 11:28 PM

Long story short, I had mine machined then drilled and tapped for high steer cross over arms. After some suspension cycling, I dont have the clearence for this set up. I want to sell the knuckles I have and replace them with the stockers. Its a '72 Blazer with a Spicer Dana 44 front axle. Anybody have these laying around for a good guy price?

vtblazer · 09-25-2008, 07:06 AM

Currently parting out two truck, I'll check em out for ya.

Ones a truck and ones a blazer but both have 6 lug fronts.

**jerry moss** · 09-25-2008, 09:12 AM

i'll check and see if i have any extras left, i hauled off a bunch of them when scrap prices were way up.

WyoRoadDog · 09-25-2008, 11:16 AM

I definitely have a set. I'll get you a pic, and we can sort a price if you want them. Do you need both, or just the passenger side?
Edit, here's pics. I also have a set of untouched flat tops that I got, thinking to do high steer with as well, maybe we trade?

sandking · 09-25-2008, 08:16 PM

Quote:

Originally Posted by vtblazer

Currently parting out two truck, I'll check em out for ya.

Ones a truck and ones a blazer but both have 6 lug fronts.

OK, Let me know. Thanks.

sandking · 09-25-2008, 08:17 PM

Quote:

Originally Posted by jerry moss

i'll check and see if i have any extras left, i hauled off a bunch of them when scrap prices were way up.

.........Just my luck again. Let me know. Thanks.

sandking · 09-25-2008, 08:23 PM

Quote:

Originally Posted by WyoRoadDog

I definitely have a set. I'll get you a pic, and we can sort a price if you want them. Do you need both, or just the passenger side?
Edit, here's pics. I also have a set of untouched flat tops that I got, thinking to do high steer with as well, maybe we trade?

Those look different then what I have now. Maybe its the flat top vs. the non-flat?

Here is what I have if someone wants to trade plus $$

**jamie72** · 09-25-2008, 08:29 PM

think i got a set of flat tops,let me know if all else fails.

sandking · 09-25-2008, 09:51 PM

Quote:

Originally Posted by jamie72

think i got a set of flat tops,let me know if all else fails.

Do you have pics? How much?

**jerry moss** · 09-25-2008, 10:45 PM

i don't have any left, sorry. i can't even find the set i had saved for my own front diff- i guess i hauled them off too

WyoRoadDog · 09-25-2008, 11:16 PM

Looks different because yours are shiny and clean! Sweet high steer as well.
The ones in my pics are a non flat top pass. side, can't get you a pic of the flat tops I have, camera is dead right now. If you want to do a trade + cash, are the shiny high steer arms in the deal?

sandking · 09-25-2008, 11:52 PM

Its a complete package with the arms, all four brand new ball joints installed and all the hardware. The tie rod and heims are not included though.

olblue60@aol.com · 09-26-2008, 09:40 AM

Duallyjams usually has a couple of sets for sale.

WyoRoadDog · 09-26-2008, 01:36 PM

Here's pics of the flat tops I have. If you're interested let's work out a deal on swapping yours for mine.

sandking · 09-26-2008, 01:45 PM

Quote:

Originally Posted by WyoRoadDog

Here's pics of the flat tops I have. If you're interested let's work out a deal on swapping yours for mine.

Can you tell me the part number on the lower sides? Just want to make sure we are swapping the same knuckle for knuckle.

sandking · 09-26-2008, 09:46 PM

bump

WyoRoadDog · 09-27-2008, 12:59 AM

It'll take a minute, I'll have to ask my wife to check them, I left town for work today. These are supposed to be off a '71 Blazer.

duallyjams · 09-27-2008, 07:44 AM

You can use non flat top knuckles off of a corp, they are a dime a dozen.

sandking · 09-27-2008, 12:03 PM

Quote:

Originally Posted by duallyjams

You can use non flat top knuckles off of a corp, they are a dime a dozen.

Thanks, but I just want to replace mine with the same type.

sandking · 09-28-2008, 11:08 AM

Bump

**jamie72** · 09-28-2008, 11:19 AM

still needing a set?? thought you had a set lined up.

OLDCHEV4X4 · 09-28-2008, 04:21 PM

why cant you just unbolt the crossover stuff, and bolt on the original stuff? The pass side will just be drilled and tapped.
If you use the 10 bolt knuckles, the center link taper is up from the bottom.

sandking · 09-28-2008, 06:57 PM

Quote:

Originally Posted by jamie72

still needing a set?? thought you had a set lined up.

Yes, I have not made a deal with anybody yet.

sandking · 09-28-2008, 07:00 PM

Quote:

Originally Posted by OLDCHEV4X4

why cant you just unbolt the crossover stuff, and bolt on the original stuff? The pass side will just be drilled and tapped.
If you use the 10 bolt knuckles, the center link taper is up from the bottom.

I can use what I have, but its a waste to have the knuckle drilled and not use it. I could sell just the arms, but with the arms and the knuckles drilled, they kinda go together. If I cant get decent money for this set up, I will sell just the arms and keep the knuckles.

WyoRoadDog · 09-28-2008, 07:58 PM

Hey King- Had my wife take a look. The numbers, as near as she can tell, are: L C35687, R C35686. Sorry for the delay, she wasn't off till today, and I'm out of town and doing 12 hour days.

09-24-2008, 11:28 PM	#1
sandking .....I am working on it..... Join Date: Jul 2007 Location: Anaheim Hills, Ca Posts: 960	Any Dana 44 steering knuckles for sale? Long story short, I had mine machined then drilled and tapped for high steer cross over arms. After some suspension cycling, I dont have the clearence for this set up. I want to sell the knuckles I have and replace them with the stockers. Its a '72 Blazer with a Spicer Dana 44 front axle. Anybody have these laying around for a good guy price? __________________ . . . . . View my build thread HERE

09-25-2008, 07:06 AM	#2
vtblazer Registered User Join Date: Oct 2003 Location: Central Vermont Posts: 8,537	Re: Any Dana 44 steering knuckles for sale? Currently parting out two truck, I'll check em out for ya. Ones a truck and ones a blazer but both have 6 lug fronts.

09-25-2008, 09:12 AM	#3
jerry moss Born Psycho Join Date: Feb 2001 Location: brentwood,cal,usa Posts: 4,936	Re: Any Dana 44 steering knuckles for sale? i'll check and see if i have any extras left, i hauled off a bunch of them when scrap prices were way up. __________________ jerry moss 72 cheyenne super K20- tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,tow hooks,bumper guards,toolbox,aux. fuel tank,posi front and rear,plus other goodies!!! SOLD 69 suburban K20-tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,4 inch all spring lift,4 speed, 14 bolt full floater, dana 44 HD,warn winch,posi front and rear,tow hooks,plus other goodies. 73/80 chevy/gmc K20 SB400,turbo 400,205,tilt,a-c,gas hog. 77 K/5 cheyenne blazer-daily driver/beater. SON HAS IT NOW BRENTWOOD,CALIFORNIA

09-25-2008, 11:16 AM	#4
WyoRoadDog Page intentionally left blank. Join Date: Jul 2006 Location: Laramie, WY Posts: 299	Re: Any Dana 44 steering knuckles for sale? I definitely have a set. I'll get you a pic, and we can sort a price if you want them. Do you need both, or just the passenger side? Edit, here's pics. I also have a set of untouched flat tops that I got, thinking to do high steer with as well, maybe we trade? Attached Images __________________ There is a theory which states that if ever anyone discovers exactly what the Universe is for and why it is here, it will instantly disappear and be replaced by something even more bizarre and inexplicable.There is another theory which states that this has already happened. - Douglas Adams '67 GMC 4x4, 305 V6! Or all the parts for anyway... '17 Subaru Outback. '18 Toyota Tacoma TRD Off Road. '99 Ducati 900SS. Last edited by WyoRoadDog; 09-25-2008 at 05:35 PM. Reason: added pics

09-25-2008, 08:29 PM	#8
jamie72 Senior Member Join Date: Apr 2000 Location: madison indiana Posts: 3,836	Re: Any Dana 44 steering knuckles for sale? think i got a set of flat tops,let me know if all else fails. __________________ jamie72 72 BB cheyenne -- Restoration getting started.. member #807 http://www.myspace.com/whitetailobsession www.antlertalk.com

09-25-2008, 10:45 PM	#10
jerry moss Born Psycho Join Date: Feb 2001 Location: brentwood,cal,usa Posts: 4,936	Re: Any Dana 44 steering knuckles for sale? i don't have any left, sorry. i can't even find the set i had saved for my own front diff- i guess i hauled them off too __________________ jerry moss 72 cheyenne super K20- tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,tow hooks,bumper guards,toolbox,aux. fuel tank,posi front and rear,plus other goodies!!! SOLD 69 suburban K20-tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,4 inch all spring lift,4 speed, 14 bolt full floater, dana 44 HD,warn winch,posi front and rear,tow hooks,plus other goodies. 73/80 chevy/gmc K20 SB400,turbo 400,205,tilt,a-c,gas hog. 77 K/5 cheyenne blazer-daily driver/beater. SON HAS IT NOW BRENTWOOD,CALIFORNIA

09-25-2008, 11:16 PM	#11
WyoRoadDog Page intentionally left blank. Join Date: Jul 2006 Location: Laramie, WY Posts: 299	Re: Any Dana 44 steering knuckles for sale? Looks different because yours are shiny and clean! Sweet high steer as well. The ones in my pics are a non flat top pass. side, can't get you a pic of the flat tops I have, camera is dead right now. If you want to do a trade + cash, are the shiny high steer arms in the deal? __________________ There is a theory which states that if ever anyone discovers exactly what the Universe is for and why it is here, it will instantly disappear and be replaced by something even more bizarre and inexplicable.There is another theory which states that this has already happened. - Douglas Adams '67 GMC 4x4, 305 V6! Or all the parts for anyway... '17 Subaru Outback. '18 Toyota Tacoma TRD Off Road. '99 Ducati 900SS.

09-25-2008, 11:52 PM	#12
sandking .....I am working on it..... Join Date: Jul 2007 Location: Anaheim Hills, Ca Posts: 960	Re: Any Dana 44 steering knuckles for sale? Its a complete package with the arms, all four brand new ball joints installed and all the hardware. The tie rod and heims are not included though. __________________ . . . . . View my build thread HERE

09-26-2008, 09:40 AM	#13
olblue60@aol.com member Join Date: Dec 2003 Location: Silver Spring Md.20901 Posts: 2,031	Re: Any Dana 44 steering knuckles for sale? Duallyjams usually has a couple of sets for sale. __________________ 1967 C/K10 Chevy Panel 1968 C/K20 Chevy Pickup 1968 C/K10 Chevy Suburban 1941 Chevy Sedan Delivery 1960 Chevy Sedan Delivery 1972 Camaro SS 396 #s matching 1971 Harley FX Superglide

09-26-2008, 01:36 PM	#14
WyoRoadDog Page intentionally left blank. Join Date: Jul 2006 Location: Laramie, WY Posts: 299	Re: Any Dana 44 steering knuckles for sale? Here's pics of the flat tops I have. If you're interested let's work out a deal on swapping yours for mine. Attached Images __________________ There is a theory which states that if ever anyone discovers exactly what the Universe is for and why it is here, it will instantly disappear and be replaced by something even more bizarre and inexplicable.There is another theory which states that this has already happened. - Douglas Adams '67 GMC 4x4, 305 V6! Or all the parts for anyway... '17 Subaru Outback. '18 Toyota Tacoma TRD Off Road. '99 Ducati 900SS.

09-26-2008, 09:46 PM	#16
sandking .....I am working on it..... Join Date: Jul 2007 Location: Anaheim Hills, Ca Posts: 960	Re: Any Dana 44 steering knuckles for sale? bump __________________ . . . . . View my build thread HERE

09-27-2008, 12:59 AM	#17
WyoRoadDog Page intentionally left blank. Join Date: Jul 2006 Location: Laramie, WY Posts: 299	Re: Any Dana 44 steering knuckles for sale? It'll take a minute, I'll have to ask my wife to check them, I left town for work today. These are supposed to be off a '71 Blazer. __________________ There is a theory which states that if ever anyone discovers exactly what the Universe is for and why it is here, it will instantly disappear and be replaced by something even more bizarre and inexplicable.There is another theory which states that this has already happened. - Douglas Adams '67 GMC 4x4, 305 V6! Or all the parts for anyway... '17 Subaru Outback. '18 Toyota Tacoma TRD Off Road. '99 Ducati 900SS. Last edited by WyoRoadDog; 09-27-2008 at 12:59 AM.

09-27-2008, 07:44 AM	#18
duallyjams Registered User Join Date: May 2007 Location: Deale Md Posts: 4,663	Re: Any Dana 44 steering knuckles for sale? You can use non flat top knuckles off of a corp, they are a dime a dozen. __________________ James 63 GMC V6 4speed carryall 65 chevy swb bbw V8 auto 68 K20 327/4 speed, buddy buckets 2002 GMC CC Dually Duramax 64 GMC lwb 3/4 V6 4speed SOLD 66 GMC swb bbw buddy buckets SOLD IG duallyjams The only thing that stays the same is constant change!

09-28-2008, 11:08 AM	#20
sandking .....I am working on it..... Join Date: Jul 2007 Location: Anaheim Hills, Ca Posts: 960	Re: Any Dana 44 steering knuckles for sale? Bump __________________ . . . . . View my build thread HERE

09-28-2008, 11:19 AM	#21
jamie72 Senior Member Join Date: Apr 2000 Location: madison indiana Posts: 3,836	Re: Any Dana 44 steering knuckles for sale? still needing a set?? thought you had a set lined up. __________________ jamie72 72 BB cheyenne -- Restoration getting started.. member #807 http://www.myspace.com/whitetailobsession www.antlertalk.com



Register or Log In To remove these advertisements.

09-28-2008, 04:21 PM	#22
OLDCHEV4X4 Registered User Join Date: Apr 2000 Location: Chester County PA, USA Posts: 1,228	Re: Any Dana 44 steering knuckles for sale? why cant you just unbolt the crossover stuff, and bolt on the original stuff? The pass side will just be drilled and tapped. If you use the 10 bolt knuckles, the center link taper is up from the bottom. __________________ 72 k/10 short wideside 72 k/5 Blazer 72 K/5 Blazer - obstacle course racer 72 custom/10 8' bed 70 K/5 Blazer 67 C-30 GMC Flat bed 86 GMC K2500 Plow Truck 85 GMC K3500 84 M1008 85 M1008 77 G30 Motor Home 72 Sears 12hp Tractor Glenmoore, Pennsylvania

09-28-2008, 07:58 PM	#25
WyoRoadDog Page intentionally left blank. Join Date: Jul 2006 Location: Laramie, WY Posts: 299	Re: Any Dana 44 steering knuckles for sale? Hey King- Had my wife take a look. The numbers, as near as she can tell, are: L C35687, R C35686. Sorry for the delay, she wasn't off till today, and I'm out of town and doing 12 hour days. __________________ There is a theory which states that if ever anyone discovers exactly what the Universe is for and why it is here, it will instantly disappear and be replaced by something even more bizarre and inexplicable.There is another theory which states that this has already happened. - Douglas Adams '67 GMC 4x4, 305 V6! Or all the parts for anyway... '17 Subaru Outback. '18 Toyota Tacoma TRD Off Road. '99 Ducati 900SS.

Register or Log In To remove these advertisements.