72 chevy truck shortbed project - Pa - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Burnsman · 09-29-2008, 08:32 PM

I was going to make a rat rod or drag truck out of this, but I just found a nova and I am running out of room. The previous owner took a factory shortbed frame and grafted a late 70's z28 subframe on it. Did a great job. Also took a chevelle 8.5 10 bolt rear and just stuck it under the truck (it's narrower, so I was going to run wide tires). Frame is blasted and painted. Rear is 4.11 posi. Has disc brakes, front sway bar, and power steering. I bought the cab off of an arizona truck. Doors are nice w/ no speaker holes. Only spots of rust are the rockers (owner fixed them, but they need finished), and a small spot on the driver cab corner. Front clip is nice. Grill is nice. Pass fender just has a small hole starting on the heel. Bed is a western bed, but it had the saddle tanks. Previous owner patched them, but I was going to dig it out and redo it. Floor is great. Bedsides have some rust just starting at leading edge (small). Tailgate has a few pinholes, but is straight. Cab is a high hump. There are extra parts that go with truck. No motor or trans, but I do have a few combos that could go with. Good Pa. title. $1500 firm for the whole truck. If I part, I will only sell if the cab goes first. $800 for the cab/doors. $250 for the front clip. $600 for the bed/gate. $300 for the frame/rear/wheels. Brian

Burnsman · 09-29-2008, 08:34 PM

more

68 short step · 09-29-2008, 08:46 PM

looks like a decent deal, expecially for ya'll northern members....

sourkraut · 09-29-2008, 09:35 PM

I am restoring a 67 swb and have a beat bed are you in the Lancaster, Meadville or the Northern Pa one? Let me know if the cab sells and you are interested in selling the bed. Thanks

Burnsman · 09-29-2008, 09:52 PM

I live in NW Pa. Brian

sourkraut · 09-29-2008, 09:58 PM

ok

Burnsman · 09-30-2008, 10:11 PM

ttt

stynchrr · 10-01-2008, 10:12 AM

If you get to parting it I would like the bed and tailgate. Do you have anymore pictures of the spots on the bed you were talking about.

Thanks Tim

sourkraut · 10-01-2008, 10:31 AM

ttt? sorry new threads

Burnsman · 10-01-2008, 10:39 AM

It will be a little while before I part it out. A few more days and I'll post it on a few other sites and ebay. If it doesn't sell whole, then I may entertain the thought of parting it. Brian

sourkraut · 10-01-2008, 10:40 AM

ok, thanks let me know, Jon

bmrrwolfe · 10-01-2008, 02:04 PM

Which meadville are you in?
Crawford or Lancaster County?
If in crawford which i think you said it was, i may be interested in the whole truck.
Im located in cleveland and your not to far away
everything looks good, but could you add some pictures of the rear suspension and what was done to it?

Burnsman · 10-01-2008, 06:11 PM

I'm in Crawford County (about 1.5-2 hours from you). I can get some pics tomorrow. The rear is just setting in there (it's a leaf spring truck). The truck will require some work to get it together, but it's a good solid start. Brian

bmrrwolfe · 10-01-2008, 06:28 PM

Quote:

Originally Posted by Burnsman

I'm in Crawford County (about 1.5-2 hours from you). I can get some pics tomorrow. The rear is just setting in there (it's a leaf spring truck). The truck will require some work to get it together, but it's a good solid start. Brian

Sounds good

Burnsman · 10-02-2008, 07:45 PM

I didn't get home til after dark tonight. I'll get some pics saturday. Brian

bmrrwolfe · 10-02-2008, 08:53 PM

Quote:

Originally Posted by Burnsman

I didn't get home til after dark tonight. I'll get some pics saturday. Brian

Alright, also i know it looks lowered, but do you have any idea how much lower is it?
Thanks!

Burnsman · 10-02-2008, 09:06 PM

No idea on how much it was lowered. Brian

Burnsman · 10-03-2008, 07:49 PM

Pics of the bad spots. Let me know if you want to see anything else. Brian

Burnsman · 10-03-2008, 07:51 PM

more

Burnsman · 10-03-2008, 07:52 PM

and more

bmrrwolfe · 10-03-2008, 11:37 PM

looks good, just wondering whats going on with the right hand bedside?

Burnsman · 10-04-2008, 08:04 AM

Like it says up above, it must have originally had saddle tanks. The previous owner patched the hole and removed the tank. I was going to dig it out and redo it (he did a bad job). Brian

bmrrwolfe · 10-04-2008, 08:53 AM

this may sound stupid but what are saddle tanks? is it just an underbed gas tank with a fill neck run up and out the bedside?

Burnsman · 10-04-2008, 12:48 PM

Yep.

bmrrwolfe · 10-05-2008, 01:09 PM

i keep trying to talk him into it but at this point hes doesn't want to...
sorry to hold it up, and ill be sure to get back to you if i can change his mind.

09-29-2008, 08:32 PM	#1
Burnsman Chevy Freak Join Date: Sep 2002 Location: Meadville, Pa. Posts: 2,804	72 chevy truck shortbed project - Pa I was going to make a rat rod or drag truck out of this, but I just found a nova and I am running out of room. The previous owner took a factory shortbed frame and grafted a late 70's z28 subframe on it. Did a great job. Also took a chevelle 8.5 10 bolt rear and just stuck it under the truck (it's narrower, so I was going to run wide tires). Frame is blasted and painted. Rear is 4.11 posi. Has disc brakes, front sway bar, and power steering. I bought the cab off of an arizona truck. Doors are nice w/ no speaker holes. Only spots of rust are the rockers (owner fixed them, but they need finished), and a small spot on the driver cab corner. Front clip is nice. Grill is nice. Pass fender just has a small hole starting on the heel. Bed is a western bed, but it had the saddle tanks. Previous owner patched them, but I was going to dig it out and redo it. Floor is great. Bedsides have some rust just starting at leading edge (small). Tailgate has a few pinholes, but is straight. Cab is a high hump. There are extra parts that go with truck. No motor or trans, but I do have a few combos that could go with. Good Pa. title. $1500 firm for the whole truck. If I part, I will only sell if the cab goes first. $800 for the cab/doors. $250 for the front clip. $600 for the bed/gate. $300 for the frame/rear/wheels. Brian Attached Images __________________ 69 GMC SWB, 350 70 Chevy LWB, 350 55 chevy gasser, 461 73 Camaro, 496 67 RS Camaro, 406 64 Chevelle, 588 71 Nova, 565 67 Camaro, 461

09-29-2008, 08:34 PM	#2
Burnsman Chevy Freak Join Date: Sep 2002 Location: Meadville, Pa. Posts: 2,804	Re: 72 chevy truck shortbed project - Pa more Attached Images __________________ 69 GMC SWB, 350 70 Chevy LWB, 350 55 chevy gasser, 461 73 Camaro, 496 67 RS Camaro, 406 64 Chevelle, 588 71 Nova, 565 67 Camaro, 461 Last edited by Burnsman; 09-29-2008 at 08:36 PM.

09-29-2008, 08:46 PM	#3
68 short step Senior Member Join Date: Aug 2005 Location: tulsa OK Posts: 3,070	Re: 72 chevy truck shortbed project - Pa looks like a decent deal, expecially for ya'll northern members....

09-29-2008, 09:35 PM	#4
sourkraut Registered User Join Date: Sep 2008 Location: WI Posts: 1,243	Re: 72 chevy truck shortbed project - Pa I am restoring a 67 swb and have a beat bed are you in the Lancaster, Meadville or the Northern Pa one? Let me know if the cab sells and you are interested in selling the bed. Thanks

09-29-2008, 09:52 PM	#5
Burnsman Chevy Freak Join Date: Sep 2002 Location: Meadville, Pa. Posts: 2,804	Re: 72 chevy truck shortbed project - Pa I live in NW Pa. Brian __________________ 69 GMC SWB, 350 70 Chevy LWB, 350 55 chevy gasser, 461 73 Camaro, 496 67 RS Camaro, 406 64 Chevelle, 588 71 Nova, 565 67 Camaro, 461

09-29-2008, 09:58 PM	#6
sourkraut Registered User Join Date: Sep 2008 Location: WI Posts: 1,243	Re: 72 chevy truck shortbed project - Pa ok

09-30-2008, 10:11 PM	#7
Burnsman Chevy Freak Join Date: Sep 2002 Location: Meadville, Pa. Posts: 2,804	Re: 72 chevy truck shortbed project - Pa ttt __________________ 69 GMC SWB, 350 70 Chevy LWB, 350 55 chevy gasser, 461 73 Camaro, 496 67 RS Camaro, 406 64 Chevelle, 588 71 Nova, 565 67 Camaro, 461

10-01-2008, 10:12 AM	#8
stynchrr Registered User Join Date: Oct 2005 Location: Dover Delaware Posts: 270	Re: 72 chevy truck shortbed project - Pa If you get to parting it I would like the bed and tailgate. Do you have anymore pictures of the spots on the bed you were talking about. Thanks Tim

10-01-2008, 10:31 AM	#9
sourkraut Registered User Join Date: Sep 2008 Location: WI Posts: 1,243	Re: 72 chevy truck shortbed project - Pa ttt? sorry new threads

10-01-2008, 10:39 AM	#10
Burnsman Chevy Freak Join Date: Sep 2002 Location: Meadville, Pa. Posts: 2,804	Re: 72 chevy truck shortbed project - Pa It will be a little while before I part it out. A few more days and I'll post it on a few other sites and ebay. If it doesn't sell whole, then I may entertain the thought of parting it. Brian __________________ 69 GMC SWB, 350 70 Chevy LWB, 350 55 chevy gasser, 461 73 Camaro, 496 67 RS Camaro, 406 64 Chevelle, 588 71 Nova, 565 67 Camaro, 461

10-01-2008, 10:40 AM	#11
sourkraut Registered User Join Date: Sep 2008 Location: WI Posts: 1,243	Re: 72 chevy truck shortbed project - Pa ok, thanks let me know, Jon

10-01-2008, 02:04 PM	#12
bmrrwolfe 1970 C10 Join Date: Dec 2007 Location: Cleveland Ohio Posts: 212	Re: 72 chevy truck shortbed project - Pa Which meadville are you in? Crawford or Lancaster County? If in crawford which i think you said it was, i may be interested in the whole truck. Im located in cleveland and your not to far away everything looks good, but could you add some pictures of the rear suspension and what was done to it? Last edited by bmrrwolfe; 10-01-2008 at 03:38 PM.

10-01-2008, 06:11 PM	#13
Burnsman Chevy Freak Join Date: Sep 2002 Location: Meadville, Pa. Posts: 2,804	Re: 72 chevy truck shortbed project - Pa I'm in Crawford County (about 1.5-2 hours from you). I can get some pics tomorrow. The rear is just setting in there (it's a leaf spring truck). The truck will require some work to get it together, but it's a good solid start. Brian __________________ 69 GMC SWB, 350 70 Chevy LWB, 350 55 chevy gasser, 461 73 Camaro, 496 67 RS Camaro, 406 64 Chevelle, 588 71 Nova, 565 67 Camaro, 461

10-02-2008, 07:45 PM	#15
Burnsman Chevy Freak Join Date: Sep 2002 Location: Meadville, Pa. Posts: 2,804	Re: 72 chevy truck shortbed project - Pa I didn't get home til after dark tonight. I'll get some pics saturday. Brian __________________ 69 GMC SWB, 350 70 Chevy LWB, 350 55 chevy gasser, 461 73 Camaro, 496 67 RS Camaro, 406 64 Chevelle, 588 71 Nova, 565 67 Camaro, 461

10-02-2008, 09:06 PM	#17
Burnsman Chevy Freak Join Date: Sep 2002 Location: Meadville, Pa. Posts: 2,804	Re: 72 chevy truck shortbed project - Pa No idea on how much it was lowered. Brian __________________ 69 GMC SWB, 350 70 Chevy LWB, 350 55 chevy gasser, 461 73 Camaro, 496 67 RS Camaro, 406 64 Chevelle, 588 71 Nova, 565 67 Camaro, 461



Register or Log In To remove these advertisements.

10-03-2008, 07:49 PM	#18
Burnsman Chevy Freak Join Date: Sep 2002 Location: Meadville, Pa. Posts: 2,804	Re: 72 chevy truck shortbed project - Pa Pics of the bad spots. Let me know if you want to see anything else. Brian Attached Images __________________ 69 GMC SWB, 350 70 Chevy LWB, 350 55 chevy gasser, 461 73 Camaro, 496 67 RS Camaro, 406 64 Chevelle, 588 71 Nova, 565 67 Camaro, 461

10-03-2008, 07:51 PM	#19
Burnsman Chevy Freak Join Date: Sep 2002 Location: Meadville, Pa. Posts: 2,804	Re: 72 chevy truck shortbed project - Pa more Attached Images __________________ 69 GMC SWB, 350 70 Chevy LWB, 350 55 chevy gasser, 461 73 Camaro, 496 67 RS Camaro, 406 64 Chevelle, 588 71 Nova, 565 67 Camaro, 461

10-03-2008, 07:52 PM	#20
Burnsman Chevy Freak Join Date: Sep 2002 Location: Meadville, Pa. Posts: 2,804	Re: 72 chevy truck shortbed project - Pa and more Attached Images __________________ 69 GMC SWB, 350 70 Chevy LWB, 350 55 chevy gasser, 461 73 Camaro, 496 67 RS Camaro, 406 64 Chevelle, 588 71 Nova, 565 67 Camaro, 461

10-03-2008, 11:37 PM	#21
bmrrwolfe 1970 C10 Join Date: Dec 2007 Location: Cleveland Ohio Posts: 212	Re: 72 chevy truck shortbed project - Pa looks good, just wondering whats going on with the right hand bedside?

10-04-2008, 08:04 AM	#22
Burnsman Chevy Freak Join Date: Sep 2002 Location: Meadville, Pa. Posts: 2,804	Re: 72 chevy truck shortbed project - Pa Like it says up above, it must have originally had saddle tanks. The previous owner patched the hole and removed the tank. I was going to dig it out and redo it (he did a bad job). Brian __________________ 69 GMC SWB, 350 70 Chevy LWB, 350 55 chevy gasser, 461 73 Camaro, 496 67 RS Camaro, 406 64 Chevelle, 588 71 Nova, 565 67 Camaro, 461

10-04-2008, 08:53 AM	#23
bmrrwolfe 1970 C10 Join Date: Dec 2007 Location: Cleveland Ohio Posts: 212	Re: 72 chevy truck shortbed project - Pa this may sound stupid but what are saddle tanks? is it just an underbed gas tank with a fill neck run up and out the bedside?

10-04-2008, 12:48 PM	#24
Burnsman Chevy Freak Join Date: Sep 2002 Location: Meadville, Pa. Posts: 2,804	Re: 72 chevy truck shortbed project - Pa Yep. __________________ 69 GMC SWB, 350 70 Chevy LWB, 350 55 chevy gasser, 461 73 Camaro, 496 67 RS Camaro, 406 64 Chevelle, 588 71 Nova, 565 67 Camaro, 461

10-05-2008, 01:09 PM	#25
bmrrwolfe 1970 C10 Join Date: Dec 2007 Location: Cleveland Ohio Posts: 212	Re: 72 chevy truck shortbed project - Pa i keep trying to talk him into it but at this point hes doesn't want to... sorry to hold it up, and ill be sure to get back to you if i can change his mind.

Register or Log In To remove these advertisements.