Please Check Out these Wheels on Ebay - The 1947 - Present Chevrolet & GMC Truck Message Board Network

LT-102 · 05-09-2002, 03:52 PM

I saw these wheels on Ebay and I think they would look really nice on my 71' C20. Are they what they appear or am I about to be ripped off.
http://cgi.ebay.com/ebaymotors/ws/eB...tem=1826950338

CARS4567 · 05-09-2002, 04:05 PM

THOSE WHEELS WOULD LOOK GREAT ON ONE OF OUR TRUCKS-BUT THE PRICE IS A LITTLE HIGH. NORMALLY I WOULD PAY ABOUT $200.00 WITH TIRES. AN YES I HAVE. YOU WILL ALSO HAVE TO SPEND ABOUT $48.00 ON THE CORRECT LUG NUTS TO FIT ON OUR 67-72 TRUCKS. THE ONES THAT THOSE WHEELS CAME OFF OF ARE METRIC. YOU ARE ALSO IN OHIO? THAT MEANS SHIPPING TOO. IF IT WERE ME, I WOULD KEEP LOOKING. THESE ARE RIGHT HERE IN SEATTLE-BUT I THINK I WOULD PASS ALSO!

Smooth68 · 05-09-2002, 04:07 PM

They appear to be what they are - their off of a newer 90's - 2000 model chevy. I'd be curious about the lugnuts - they are metric from the factory.

------------------
Prost68trk web page
or btshaffer@wmconnect.com
'68 short/wide, 402BB/TH400, '81 rear frame rails, F@rd 9" 31 spline, leaf springs moved inboard, shaved firewall, cab seam, wiper cowl, dash, hood ridge, chrome drivetrain.
'97 Z-71 Ext-cab Driver
West Fork, Arkansas
IM - btshaffer (will soon change)

LT-102 · 05-09-2002, 04:09 PM

Thanks for the advice, I've bought enough "wrong" things in my life because I didn't ask somebody who knew. I think I will pass on these wheels.

dion · 05-09-2002, 05:03 PM

I've seen these rims on our trucks and they pretty good, I was thinking about putting them on mine. They are off of the newer Chevys. I'm sure you could find them for cheaper than that though, check the yards.

------------------
72 Cheyenne C20
Built 350/T350
AC/PS/PB/AT
Dana60 Leaf
Factory Saddle Tanks
San Diego, CA

Pics of My Truck
<A HREF="http://photos.yahoo.com/bc/aikidojiujitsu/lst?.dir=/Chevy+Cheyenne+C20&.src=
ph&.last=1" TARGET=_blank>http://photos.yahoo.com/bc/aikidojiujitsu/lst?.dir=/Chevy+Cheyenne+C20&.src=
ph&.last=1</A>

Solver · 05-09-2002, 05:51 PM

Those rims do fit as I have put them on my 3/4 chevy . I did have to get different lugnuts as those are to small. Also you have to double nut the back wheels as the center caps won't clear hubs otherwise.(use your standard lugnuts then the new ones over those)

------------------[list] [*] 1972 Cheyenne Super 20 LWB[*] 1972 Cheyenne Super 10 LWB[*] 1972 Chevy Custom 20[*] 1971 Cheyenne 10 LWB[*] 1968 1/2 ton lwb project[*] 2 1980 camaros 1 done 1 getting started[*] 3 1949 ford 8n tractors[*] 1987 camaro[*] 1996 Chevy Tahoe
/[list]

dion · 05-09-2002, 05:57 PM

Solver,
Can you post some pics of your tuck with those rims?

------------------
72 Cheyenne C20
Built 350/T350
AC/PS/PB/AT
Dana60 Leaf
Factory Saddle Tanks
San Diego, CA

Pics of My Truck
<A HREF="http://photos.yahoo.com/bc/aikidojiujitsu/lst?.dir=/Chevy+Cheyenne+C20&.src=
ph&.last=1" TARGET=_blank>http://photos.yahoo.com/bc/aikidojiujitsu/lst?.dir=/Chevy+Cheyenne+C20&.src=
ph&.last=1</A>

CARS4567 · 05-09-2002, 06:18 PM

DION,
ONE OF THE 'LONGHORN' GUYS HAS A PICTURE OF A GREEN LONGHORN WITH THOSE WHEELS-AND YES THEY DO LOOK GOOD-I HAVE 2 TRUCKS WITH

imdarren · 05-09-2002, 06:34 PM

They seem a little high to me.
Darren

pierce · 05-09-2002, 07:08 PM

I have them on my Longhorn. Got them from Elkhart, Indiana where they do conversions so they are new pull offs, the rings and center caps were still packaged. Choice of GMC or Chevy. They are about the same price. Here's a pic...

------------------
72 Chevy Blazer
69 GMC Longhorn
37 Chevy Coupe
pics at http://home.fuse.net/pierce
Cincinnati, OH

Bill72BB · 05-10-2002, 08:51 AM

Those wheel do look good and so do the late model alloy's .
Where do you get the Lug nuts to make the caps work? What size are they.

Thanks Bill

------------------
72 3/4ton Custom Camper BB,400 Dynamax Cermax headers , air,ps,pb,leafsprings
tilt,3.54 . 82 chevy silverado sb ,ps,pb pw,pd,air 350/350 Flowmaster 40.
Torrance Calif.

" If I knew I was going to live this long I would have taken better care of myself "

ftw80 · 05-10-2002, 07:07 PM

That is what I am going to run. I got my lugs from Stocton wheel. http://www.stocktonwheel.com I alsos bought matching dualie center caps for the rear(covers the floating hub.) Very limited in wheel choices for 8 lugs so I think these are a good choice. Since they are only availale in 7"(6.75) width, I had a stock car guy widen my rear rims so I now have 16x9 rear and stock 16x6.75 fronts. This makes the dualie center cap flush like the front. I am going to run general 275 55 16s all the wayn around. I will post photos when I mount them or you can check my web page. I paid $200 for mine with used tires but and the ride is much better than the bias ply stockers.

------------------
Haleiwa, Hi.

1972 Custom Camper Cheyenne Super c/20 Longhorn 402bb 78k a/c, tach, tilt, tool stowage in the paint shop since January soon to be black!
48panhead
74 bronco
71 bronco
http://www.noscade.com/

pierce · 05-11-2002, 07:55 AM

Bill72BB size is 1/2 or 9/16 either one they make them, here's a closeup of a double threaded lug nuts and different sizes avail... http://www.jaeeagle.com/nutstrimrings.html

------------------
72 Chevy Blazer
69 GMC Longhorn
37 Chevy Coupe
pics at http://home.fuse.net/pierce
Cincinnati, OH

05-09-2002, 03:52 PM	#1
LT-102 Registered User Join Date: Nov 2000 Location: Greenville, Oh USA Posts: 166	Please Check Out these Wheels on Ebay I saw these wheels on Ebay and I think they would look really nice on my 71' C20. Are they what they appear or am I about to be ripped off. http://cgi.ebay.com/ebaymotors/ws/eB...tem=1826950338

05-09-2002, 04:07 PM	#3
Smooth68 Registered User Join Date: Aug 2001 Location: West Fork, Arkansas - Razorback Country Posts: 1,826	They appear to be what they are - their off of a newer 90's - 2000 model chevy. I'd be curious about the lugnuts - they are metric from the factory. ------------------ Prost68trk web page or btshaffer@wmconnect.com '68 short/wide, 402BB/TH400, '81 rear frame rails, F@rd 9" 31 spline, leaf springs moved inboard, shaved firewall, cab seam, wiper cowl, dash, hood ridge, chrome drivetrain. '97 Z-71 Ext-cab Driver West Fork, Arkansas IM - btshaffer (will soon change) __________________ Smooth68's Web Site WTB 64-66 project or frame/cab, SWB or LWB...I have the fever! Whatcha got?? '68 Short Step - Shaved Body, Soon Bagged - *SOLD* Driver-2004 GMC Z-71 Ext-cab

05-09-2002, 05:03 PM	#5
dion 72 Cheyenne Join Date: Oct 2001 Location: San Diego Posts: 2,086	I've seen these rims on our trucks and they pretty good, I was thinking about putting them on mine. They are off of the newer Chevys. I'm sure you could find them for cheaper than that though, check the yards. ------------------ 72 Cheyenne C20 Built 350/T350 AC/PS/PB/AT Dana60 Leaf Factory Saddle Tanks San Diego, CA Pics of My Truck <A HREF="http://photos.yahoo.com/bc/aikidojiujitsu/lst?.dir=/Chevy+Cheyenne+C20&.src= ph&.last=1" TARGET=_blank>http://photos.yahoo.com/bc/aikidojiujitsu/lst?.dir=/Chevy+Cheyenne+C20&.src= ph&.last=1</A> __________________ Burnout Idle 1972Cheyenne 1966/67Stouts

05-09-2002, 05:51 PM	#6
Solver Registered User Join Date: May 2000 Location: Storm Lake, Ia Posts: 1,449	Those rims do fit as I have put them on my 3/4 chevy . I did have to get different lugnuts as those are to small. Also you have to double nut the back wheels as the center caps won't clear hubs otherwise.(use your standard lugnuts then the new ones over those) ------------------[list] [] 1972 Cheyenne Super 20 LWB[] 1972 Cheyenne Super 10 LWB[] 1972 Chevy Custom 20[] 1971 Cheyenne 10 LWB[] 1968 1/2 ton lwb project[] 2 1980 camaros 1 done 1 getting started[] 3 1949 ford 8n tractors[] 1987 camaro[*] 1996 Chevy Tahoe /[list] __________________ 1972 Cheyenne Super 20 LWB-Blue 1972 Cheyenne Super 10 LWB-Black 1972 Cheyenne Super 10 LWB-Red 1972 Cheyenne Super 10 LWB-green 1972 GMC 4x4 LWB-White 1971 Cheyenne 10 LWB-Ochre 1971 Cheyenne 20 Longhorn-Copper 1971 Cheyenne 20 Longhorn-Black 1969 Custom 10 LWB-lt blue 1968 GMC 3/4 ton-green 1968 1/2 ton swb stepside-silver 1967 Chevrolet CST 10 LWB-green 1967 Chevrolet custom 20 LWB-Maroon

05-09-2002, 05:57 PM	#7
dion 72 Cheyenne Join Date: Oct 2001 Location: San Diego Posts: 2,086	Solver, Can you post some pics of your tuck with those rims? ------------------ 72 Cheyenne C20 Built 350/T350 AC/PS/PB/AT Dana60 Leaf Factory Saddle Tanks San Diego, CA Pics of My Truck <A HREF="http://photos.yahoo.com/bc/aikidojiujitsu/lst?.dir=/Chevy+Cheyenne+C20&.src= ph&.last=1" TARGET=_blank>http://photos.yahoo.com/bc/aikidojiujitsu/lst?.dir=/Chevy+Cheyenne+C20&.src= ph&.last=1</A> __________________ Burnout Idle 1972Cheyenne 1966/67Stouts

05-09-2002, 04:05 PM	#2
CARS4567 Registered User Join Date: Jan 2002 Location: SEATTLE, WA Posts: 338	THOSE WHEELS WOULD LOOK GREAT ON ONE OF OUR TRUCKS-BUT THE PRICE IS A LITTLE HIGH. NORMALLY I WOULD PAY ABOUT $200.00 WITH TIRES. AN YES I HAVE. YOU WILL ALSO HAVE TO SPEND ABOUT $48.00 ON THE CORRECT LUG NUTS TO FIT ON OUR 67-72 TRUCKS. THE ONES THAT THOSE WHEELS CAME OFF OF ARE METRIC. YOU ARE ALSO IN OHIO? THAT MEANS SHIPPING TOO. IF IT WERE ME, I WOULD KEEP LOOKING. THESE ARE RIGHT HERE IN SEATTLE-BUT I THINK I WOULD PASS ALSO!

05-09-2002, 04:09 PM	#4
LT-102 Registered User Join Date: Nov 2000 Location: Greenville, Oh USA Posts: 166	Thanks for the advice, I've bought enough "wrong" things in my life because I didn't ask somebody who knew. I think I will pass on these wheels.

05-09-2002, 06:18 PM	#8
CARS4567 Registered User Join Date: Jan 2002 Location: SEATTLE, WA Posts: 338	DION, ONE OF THE 'LONGHORN' GUYS HAS A PICTURE OF A GREEN LONGHORN WITH THOSE WHEELS-AND YES THEY DO LOOK GOOD-I HAVE 2 TRUCKS WITH

05-09-2002, 06:34 PM	#9
imdarren Registered User Join Date: Oct 2001 Location: SW Washington Posts: 1,006	They seem a little high to me. Darren __________________ Washington State 1967 Chevy C10 LWB Rodstoration In Progress. 1972 K20 Cheyenne Super

05-09-2002, 07:08 PM	#10
pierce Registered User Join Date: Sep 2000 Location: Cincinnati,OH,USA Posts: 464	I have them on my Longhorn. Got them from Elkhart, Indiana where they do conversions so they are new pull offs, the rings and center caps were still packaged. Choice of GMC or Chevy. They are about the same price. Here's a pic... ------------------ 72 Chevy Blazer 69 GMC Longhorn 37 Chevy Coupe pics at http://home.fuse.net/pierce Cincinnati, OH __________________ 69 GMC 1 Ton Longhorn 37 Chevy Coupe

05-10-2002, 08:51 AM	#11
Bill72BB Thats the Hillbilly way Join Date: Jul 2001 Location: Torrance,Ca Posts: 5,979	Those wheel do look good and so do the late model alloy's . Where do you get the Lug nuts to make the caps work? What size are they. Thanks Bill ------------------ 72 3/4ton Custom Camper BB,400 Dynamax Cermax headers , air,ps,pb,leafsprings tilt,3.54 . 82 chevy silverado sb ,ps,pb pw,pd,air 350/350 Flowmaster 40. Torrance Calif. " If I knew I was going to live this long I would have taken better care of myself " __________________ BILL Torrance Calif 90504 Member DUF Club Member Old Farts Club 72 3/4ton Custom Camper BB402/400 trans Dynomax Cerama-coat headers , Hei distributor ,Edelbrock 1411 air,ps,pb,leafsprings ,98 chevy 60/40 seat,S10 shoulder belts tilt,3.54 Dana 60 rear. 16" Eagle wheels with LT265/75 16 tires,Gaylord Lid,H4 headlights with 100W relay conversion. " If I knew I was going to live this long I would have taken better care of myself " Marriage changes passion...suddenly you're in bed with a relative. A GUY'S PRAYER.... Lord, I pray for a nympho with huge boobs who owns a liquor store and likes to fish and hunt and has a Harley .Amen ,

05-10-2002, 07:07 PM	#12
ftw80 Registered User Join Date: Feb 2000 Location: hawaii Posts: 268	That is what I am going to run. I got my lugs from Stocton wheel. http://www.stocktonwheel.com I alsos bought matching dualie center caps for the rear(covers the floating hub.) Very limited in wheel choices for 8 lugs so I think these are a good choice. Since they are only availale in 7"(6.75) width, I had a stock car guy widen my rear rims so I now have 16x9 rear and stock 16x6.75 fronts. This makes the dualie center cap flush like the front. I am going to run general 275 55 16s all the wayn around. I will post photos when I mount them or you can check my web page. I paid $200 for mine with used tires but and the ride is much better than the bias ply stockers. ------------------ Haleiwa, Hi. 1972 Custom Camper Cheyenne Super c/20 Longhorn 402bb 78k a/c, tach, tilt, tool stowage in the paint shop since January soon to be black! 48panhead 74 bronco 71 bronco http://www.noscade.com/ __________________ Haleiwa, Hi. 1972 Custom Camper Cheyenne Super c/20 Longhorn 402bb 78k a/c, tach, tilt, tool stowage 48panhead 74 bronco 71 bronco http://noscade.com No Scade is pidgin English for "not scared" similar to "no fear".

05-11-2002, 07:55 AM	#13
pierce Registered User Join Date: Sep 2000 Location: Cincinnati,OH,USA Posts: 464	Bill72BB size is 1/2 or 9/16 either one they make them, here's a closeup of a double threaded lug nuts and different sizes avail... http://www.jaeeagle.com/nutstrimrings.html ------------------ 72 Chevy Blazer 69 GMC Longhorn 37 Chevy Coupe pics at http://home.fuse.net/pierce Cincinnati, OH __________________ 69 GMC 1 Ton Longhorn 37 Chevy Coupe



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.