|
11-21-2002, 06:27 PM
|
#1 |
|
[]D [] []v[] []D
Join Date: Dec 2001
Location: h'vegas,TN,USA
Posts: 78
|
heads ?
my dad broght home some heads (free) and he doesnt know anything about them except cast iron the number on top is 376450 and it also says GM12T on the other side , if the first set of number is wrong the last five could be a 6 but any help would be great thanks
__________________
Clint 72 c'10 350ci/400hp sleeper forever |
|
|
|
11-21-2002, 07:11 PM
|
#2 |
|
Fabricate till you "puke"
Join Date: Jun 2002
Location: Ill
Posts: 9,403
|
Those look like 262/267/305 castings, with 60 cc chambers. Try this link..... http://www.mortec.com/castnum.htm
__________________
69 longhorn,4" chop,3/5 drop, 1/2 ton suspension/disc brakes,1 1/2" body drop,steel tilt clip, 5.3/Edelbrock rpm intake/600 carb, Hooker streetrod shorties,2 1/2" exhaust/ H pipe/50's Flows , 6 spd Richmond trans,12 bolt/ 3.40 gears.... |
|
|
|
|
11-22-2002, 01:14 AM
|
#3 | |
|
its all about the +6 inches
Join Date: Jan 2001
Location: Hilliard Ohio
Posts: 2,693
|
Quote:
Don't put them on a 350...trust me on this one. |
|
|
|
|
|
11-22-2002, 01:18 AM
|
#4 |
|
My other Love
Join Date: Aug 2001
Location: Castlegar B.C. Canada
Posts: 4,085
|
see how far you can chuck them into a forest. Or if you have a problem with paper blowing away you have found your solution. Those heads aren't even worth the iron they are made of. Plus they are among the heads that are prone to cracking along the water jackets into the combustion chamber.
__________________
 Castlegar B.C.The great white North (Canada Eh!) Hooter_5@hotmail.com First generation Monte Carlo club pictures of my life |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
