Another new guy from Texas - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Tim's68 · 10-19-2008, 05:25 PM

Hey everyone, This is Tim from Splendora, Texas been looking at this site for a while and must say, I like it.
I have been trying to post for 2 months now and have had no luck, my computer skills are lacking. All the post that I have done are somewhere on this board. I just hope this post actually shows up.

Now for a little about my truck and my shop.
I have a 68 short bed Chevy that needs a lot of work. My plans are to build a Pro Street big block weekend driver.
I want to do a back half and run 33X21.50X20 tires.
Plan on buying a Chris Alstom rear clip, anyone have any thoughts on the direction that I plan on taking???? Sure could use yalls help.
I dont think it would be that hard to do this frame work???
Im not trying to do one of the VERY NICE custom frames that I have seen on this site, I just want to do a basic rear clip.
I just completed building my shop, I had a 42X40 metal building put up in my back yard. I have a Millermatic 210 welding machine to take care of all the welding that will be required.

Well, before I waste a bunch of time typing a long yada yada about my dream
Im gonna make sure this even gets to where it can be read.

Oh, I know pictures are proof, and as soon as I learn how to post the pictures I will for sure do so.
Thanks ahead of time for your thoughts.

Cyclone44 · 10-19-2008, 08:17 PM

from Knoxville Tn.....

SCOTI · 10-19-2008, 08:51 PM

Welcome from DFW.

Tim's68 · 10-19-2008, 08:58 PM

How do I post on the main page. Sorry for not knowing the in's and out's of this site

shaneschevys · 10-20-2008, 12:44 AM

Welcome from FT Worth!!

90\87Formula · 10-20-2008, 10:16 AM

Welcome from Abilene.

jsbgump · 10-20-2008, 10:52 AM

Welcome to the board from a fellow Texan

72BlckButy · 10-20-2008, 07:21 PM

to the board from Mid-MO!!!

You'll find this place to become your second home. There's tons of information, friends, parts, .... and so much more.

DREAMS OF A 67 · 10-20-2008, 07:40 PM

FROM KNOXVILLE TN!!!

Painter D · 10-20-2008, 09:09 PM

Woo-hoo another texan!

Welcome from DFW

jholley · 10-29-2008, 11:08 AM

I think there are more Texans here than any other state. Welcome from Waco

10-19-2008, 05:25 PM	#1
Tim's68 Registered User Join Date: Aug 2008 Location: Splendora, Texas Posts: 44	Another new guy from Texas Hey everyone, This is Tim from Splendora, Texas been looking at this site for a while and must say, I like it. I have been trying to post for 2 months now and have had no luck, my computer skills are lacking. All the post that I have done are somewhere on this board. I just hope this post actually shows up. Now for a little about my truck and my shop. I have a 68 short bed Chevy that needs a lot of work. My plans are to build a Pro Street big block weekend driver. I want to do a back half and run 33X21.50X20 tires. Plan on buying a Chris Alstom rear clip, anyone have any thoughts on the direction that I plan on taking???? Sure could use yalls help. I dont think it would be that hard to do this frame work??? Im not trying to do one of the VERY NICE custom frames that I have seen on this site, I just want to do a basic rear clip. I just completed building my shop, I had a 42X40 metal building put up in my back yard. I have a Millermatic 210 welding machine to take care of all the welding that will be required. Well, before I waste a bunch of time typing a long yada yada about my dream Im gonna make sure this even gets to where it can be read. Oh, I know pictures are proof, and as soon as I learn how to post the pictures I will for sure do so. Thanks ahead of time for your thoughts.

10-19-2008, 08:17 PM	#2
Cyclone44 Step Brother Join Date: Sep 2007 Location: K-town Posts: 4,029	Re: Another new guy from Texas from Knoxville Tn.....

10-19-2008, 08:51 PM	#3
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 21,938	Re: Another new guy from Texas Welcome from DFW. __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

10-19-2008, 08:58 PM	#4
Tim's68 Registered User Join Date: Aug 2008 Location: Splendora, Texas Posts: 44	Re: Another new guy from Texas How do I post on the main page. Sorry for not knowing the in's and out's of this site

10-20-2008, 12:44 AM	#5
shaneschevys Its always something! Join Date: Aug 2005 Location: FT Worth,TX Posts: 4,992	Re: Another new guy from Texas Welcome from FT Worth!! __________________ 79 p10 stepvan 72 Short Fleetside 72 Suburban 67 GMC One Ton Flatbed 64 Short Fleetside 57 Chevy 2DR Hard Top 57 Chevy 2dr wagon 65 f* short fleet 63 C 60 Flatbed Member of the patina club**

10-20-2008, 10:16 AM	#6
90\87Formula Registered User $90\87Formula's Avatar$ Join Date: Oct 2000 Location: Abilene Texas Posts: 1,756	Re: Another new guy from Texas Welcome from Abilene. __________________ Robert Member 1532
$90\87Formula is offline$

10-20-2008, 10:52 AM	#7
jsbgump Gone Fishing Join Date: Aug 2005 Location: Fort Worth, Texas 76135 Posts: 12,361	Re: Another new guy from Texas Welcome to the board from a fellow Texan __________________ 68 Chevy Short Fleetside LSX Swap Under Way 3.73 posi 2.5/4 drop Frame of resto has been started 2022 Hyundai Tucson Limited 2019 Chevy Traverse Redline Edition Wifes Ride Build Thread http://67-72chevytrucks.com/vboard/s...=1#post3483616

10-20-2008, 07:21 PM	#8
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: Another new guy from Texas to the board from Mid-MO!!! You'll find this place to become your second home. There's tons of information, friends, parts, .... and so much more. __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)

10-20-2008, 07:40 PM	#9
DREAMS OF A 67 Step Brother Join Date: Sep 2007 Location: knoxville TN Posts: 1,950	Re: Another new guy from Texas FROM KNOXVILLE TN!!! __________________ Joe

10-20-2008, 09:09 PM	#10
Painter D Registered User Join Date: Jun 2007 Location: DFW (Forney) Posts: 1,529	Re: Another new guy from Texas Woo-hoo another texan! Welcome from DFW __________________ '58 SWB Fleetside...Front & Rear Porterbuilt Dropmember, 6.0 LS /4L60E. Accuair E-level, 20 Billet Specialties (Vintecs) '63 Buick Riviera ... AccuAir E-level, 20" Billet Specialties (Vintecs) http://67-72chevytrucks.com/vboard/s...=528853&page=5

10-29-2008, 11:08 AM	#11
jholley Registered User Join Date: Jul 2008 Location: TX Posts: 737	Re: Another new guy from Texas I think there are more Texans here than any other state. Welcome from Waco __________________ ------------------------------------------------- Jim Garage fillers... 85 Chevy C10 Silverado LWB 07 Nissan Altima 2006 Mini Cooper S



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.