Cab Noise (need HELP!) - The 1947 - Present Chevrolet & GMC Truck Message Board Network

CHEVY_FOREVER · 11-25-2002, 10:19 PM

My truck does not have original doors. They do not match up well at all. It has good rubber seals but I can still see a tiny bit of daylight!!! There is way too much noise I can't stand it.

Any ideas what I should do?!?

Thanks,
BRIAN

gchemist · 11-26-2002, 12:22 AM

You need to adjust the striker bolt and the door hangers. Striker bolts is the easiest. Adjusting the door hindges is harder and you'll probably need some help.

**old Rusty C10** · 11-26-2002, 12:38 AM

where is the daylight towards the striker side or towards the hinge side? adjust the items accordingly

CHEVY_FOREVER · 11-26-2002, 09:07 AM

The daylight can be seen at the top of the door.

pkbinplano · 11-26-2002, 09:10 PM

What I've done in the past to my trucks is roll down the window and tweak the top of the door either by hand or a 2 x 4. Just don't get carried away. Mine always seemed to suck air above vent window.

11-25-2002, 10:19 PM	#1
CHEVY_FOREVER USA love it OR leave it! Join Date: Sep 2002 Location: Western Pennsylvania Posts: 162	Cab Noise (need HELP!) My truck does not have original doors. They do not match up well at all. It has good rubber seals but I can still see a tiny bit of daylight!!! There is way too much noise I can't stand it. Any ideas what I should do?!? Thanks, BRIAN

11-26-2002, 12:22 AM	#2
gchemist BAD BOW-Silverado XST Join Date: May 2000 Location: Senior Member from Austin, TX Posts: 6,431	You need to adjust the striker bolt and the door hangers. Striker bolts is the easiest. Adjusting the door hindges is harder and you'll probably need some help. __________________ Gerardo a.k.a. Mad Chemist Silverado XST videos

11-26-2002, 12:38 AM	#3
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,313	sealing doors where is the daylight towards the striker side or towards the hinge side? adjust the items accordingly __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!

11-26-2002, 09:10 PM	#5
pkbinplano pkbinplano Join Date: Nov 2002 Location: Plano Texas Posts: 370	What I've done in the past to my trucks is roll down the window and tweak the top of the door either by hand or a 2 x 4. Just don't get carried away. Mine always seemed to suck air above vent window. __________________ http://www.picturetrail.com/gallery/...7496&members=1 84 chevy silverado aka The Bananna Boat

11-26-2002, 09:07 AM	#4
CHEVY_FOREVER USA love it OR leave it! Join Date: Sep 2002 Location: Western Pennsylvania Posts: 162	The daylight can be seen at the top of the door.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.