Texas 60-66 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Rogue 64 · 11-10-2008, 11:32 PM

Well not exactly, but I couldn't pass these up.

*LILRED66* · 11-10-2008, 11:40 PM

In the state of Kansas you can take an old vintage plate and the DMV will validate it and allow you to use it on your classic truck. I know several people who have done it.

Maybe your state will allow the same...you should consult your state DMV to see if they will do the same.

I also know of a fellow in the Kansas City area that will restore vintage plates to DMV specifications, so it looks like your plate is brand new, even though it may be 44 years old.

jonzcustomshop · 11-10-2008, 11:53 PM

looks like you need to get a 64, 60-61 hood, 62 grille, 63-6 side trim and you are covered, then slap that plate on it!...

Rogue 64 · 11-11-2008, 12:16 AM

I run YOM plates on my 1962 Thunderbird.

I have a '64...with a '63 Custom Grille and '62 Bowties on the extensions.
Does that count?

There is a lot more, but I wont go into it yet.

1956cameo · 11-11-2008, 12:01 PM

Yeah, Texas allows you to run old plates. However they have to visually inspect them before allowing anyone to use them. If they look presentable then they will register your vehicle under them.

Demmit_Hemmit's 65 · 11-11-2008, 06:00 PM

Indiana also will let you run old plates also.......Hemmit

Alan's Classic · 11-11-2008, 06:13 PM

Georgia will also allow it.

Just have to find some.

11-10-2008, 11:32 PM	#1
Rogue 64 Ol' Blue Viking Join Date: Nov 2006 Location: north of Baton Rouge Posts: 172	Texas 60-66 Well not exactly, but I couldn't pass these up. Attached Images __________________ Driving Paw-paws truck into the Sunset!

11-10-2008, 11:40 PM	#2
LILRED66 Account Suspended Join Date: May 2005 Location: Kansas City, KS Posts: 3,906	Re: Texas 60-66 In the state of Kansas you can take an old vintage plate and the DMV will validate it and allow you to use it on your classic truck. I know several people who have done it. Maybe your state will allow the same...you should consult your state DMV to see if they will do the same. I also know of a fellow in the Kansas City area that will restore vintage plates to DMV specifications, so it looks like your plate is brand new, even though it may be 44 years old.

11-10-2008, 11:53 PM	#3
jonzcustomshop 1961 crewcab Join Date: Dec 2007 Location: missoula, mt Posts: 6,164	Re: Texas 60-66 looks like you need to get a 64, 60-61 hood, 62 grille, 63-6 side trim and you are covered, then slap that plate on it!...

11-11-2008, 12:16 AM	#4
Rogue 64 Ol' Blue Viking Join Date: Nov 2006 Location: north of Baton Rouge Posts: 172	Re: Texas 60-66 I run YOM plates on my 1962 Thunderbird. I have a '64...with a '63 Custom Grille and '62 Bowties on the extensions. Does that count? There is a lot more, but I wont go into it yet. __________________ Driving Paw-paws truck into the Sunset!

11-11-2008, 12:01 PM	#5
1956cameo Registered User Join Date: Apr 2008 Location: Angleton, TX Posts: 2,219	Re: Texas 60-66 Yeah, Texas allows you to run old plates. However they have to visually inspect them before allowing anyone to use them. If they look presentable then they will register your vehicle under them.

11-11-2008, 06:00 PM	#6
Demmit_Hemmit's 65 Senior Member Join Date: Mar 2002 Location: Peru, Indiana Posts: 741	Re: Texas 60-66 Indiana also will let you run old plates also.......Hemmit

11-11-2008, 06:13 PM	#7
Alan's Classic 1 thing at a time is progress. Join Date: Jun 2007 Location: Ball Ground GA Posts: 5,511	Re: Texas 60-66 Georgia will also allow it. Just have to find some. __________________ Alan Philippians 2:14-16 Alan's Classic Facebook page. North Georgia Group Project 1965 Vitamin C-10 1995 GMC Sierra K1500 The "Wrecker"



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.