Blazers - The 1947 - Present Chevrolet & GMC Truck Message Board Network

David Johnson · 11-12-2008, 12:15 AM

I think I'm going to get out of the Blazer business so I thought I'd test the water. I have the following:

72 Blazer - Mostly complete except the interior. Has motor and drivetrain, but I don't know if it runs. Typical blazer rust, rust in the bed floor. PS, PB truck. SOLD!

72 Jimmy - Typical rust but the most solid overall. No motor or drivetrain. Factory PS, PB, Tilt, A/C truck.

70 Blazer - Pretty rough but good for parts. No motor but has manual tranny and transfer case. No rear end which makes it a ***** to move or load. PS, PB, A/C truck.

72 Blazer - Wrecked body only. Was in very good shape when wrecked. Has buckets. PS, PB truck. SOLD!

All tops are junk and double walled. I'm not crazy about selling, but we'll start at $5000 for all (now $2500). I would rather not seperate them. I'll try and post some pics later. Here's a couple though.

Spray-Bomb · 11-12-2008, 11:55 AM

If you decide to split them apart, more pics of the 72 Jimmy would be nice

Also what would it take to get it to roll onto a trailer ??? Just a couple wheels ???

David Johnson · 11-12-2008, 12:18 PM

That's an old picture. It now has 8" rallys w/ 31x10.5's on all fours and rolls great. Also has doors.

Spray-Bomb · 11-12-2008, 12:40 PM

Oh dang, even better

LUV2XCLR8 · 11-12-2008, 06:39 PM

I think it's worth it, but finding a buyer is the hard part

David Johnson · 11-12-2008, 07:18 PM

Here's a couple more pics.

jayharrell · 11-12-2008, 08:16 PM

bump for the nice collection of rallys and buckets.

David Johnson · 11-13-2008, 10:08 AM

ttt

72BLKCHEYENNE · 11-13-2008, 01:23 PM

what shape is the winshield frame on the 72 is it rusted or bent?

David Johnson · 11-13-2008, 02:07 PM

The Jimmy? It's pretty solid but does have a little rust at the top corners. Very repairable.

David Johnson · 11-13-2008, 08:06 PM

ttt

David Johnson · 11-14-2008, 10:03 AM

Anyone?......Any input?

72BLKCHEYENNE · 11-14-2008, 11:12 AM

No, the wrecked blazer I am in need of a winshield frame......

RLONG · 11-14-2008, 11:57 AM

If you decide to part out i could use roll bar and buckets or sell seperate the chevy with no top

David Johnson · 11-15-2008, 08:24 PM

Don't really want to seperate.

cnshoot · 11-15-2008, 10:48 PM

if you split up please let me know i could use one with the best tub, windshield frame and good driver bedside have everything else

Spray-Bomb · 11-16-2008, 01:40 AM

In case you decide to split em up, I changed my mind & dont need a blazer now, so you can take me off the list

charlie72 · 11-16-2008, 10:36 PM

im looking for a clean title for my 72. do u have a clean title, vin# plate, and glove box door for sale?? if so whats your price?

let me know

charlie 831 320 1210

David Johnson · 11-24-2008, 10:15 AM

Anyone?...Offers?

David Johnson · 12-22-2008, 04:29 PM

Anyone have any offers for the collection? I may split them if anyone wants to make a deal.

LUV2XCLR8 · 12-22-2008, 06:01 PM

Interested in a possible rear floor section if you split up?

(Assuming one of them has a near flawless bed floor in it)

kookykrispy · 12-22-2008, 07:37 PM

If you end up splitting them up/parting out... I'm looking the complete power steering system... gearbox & pitman arm, hoses, pump, brackets... and the alternator bracket too!

Wootdog · 12-22-2008, 07:51 PM

Do you have one that is mostly complete with not too much rust?
Kerry In Virginia.

David Johnson · 12-22-2008, 09:41 PM

LUV - I think the wrecked tub has a good floor in it but I don't know how I'd get it to you.

Kooky - I'll let you know if I part one that is that complete.

Woot - All are rusty, have patch panels to repair and none are complete. Just buy the lot and you'll have plenty!

Jtrux · 12-22-2008, 10:42 PM

So are we parting out yet? Might be interested in tub if price is right.
Might be interested in the whole 70.

11-12-2008, 12:15 AM	#1
David Johnson Registered User Join Date: Dec 2004 Location: Shawnee, OK Posts: 614	Blazers I think I'm going to get out of the Blazer business so I thought I'd test the water. I have the following: 72 Blazer - Mostly complete except the interior. Has motor and drivetrain, but I don't know if it runs. Typical blazer rust, rust in the bed floor. PS, PB truck. SOLD! 72 Jimmy - Typical rust but the most solid overall. No motor or drivetrain. Factory PS, PB, Tilt, A/C truck. 70 Blazer - Pretty rough but good for parts. No motor but has manual tranny and transfer case. No rear end which makes it a *** to move or load. PS, PB, A/C truck. 72 Blazer - Wrecked body only. Was in very good shape when wrecked. Has buckets. PS, PB truck. SOLD! All tops are junk and double walled. I'm not crazy about selling, but we'll start at $5000 for all (now $2500)*. I would rather not seperate them. I'll try and post some pics later. Here's a couple though. Attached Images Last edited by David Johnson; 02-12-2009 at 06:58 PM.*

11-12-2008, 11:55 AM	#2
Spray-Bomb Texas Big Wig Join Date: Jan 2007 Location: Mineola, Texas Posts: 5,620	Re: Blazers If you decide to split them apart, more pics of the 72 Jimmy would be nice Also what would it take to get it to roll onto a trailer ??? Just a couple wheels ??? __________________ Just not low enough... ----------------------------- Sinister Killer

11-12-2008, 12:18 PM	#3
David Johnson Registered User Join Date: Dec 2004 Location: Shawnee, OK Posts: 614	Re: Blazers That's an old picture. It now has 8" rallys w/ 31x10.5's on all fours and rolls great. Also has doors. Last edited by David Johnson; 11-12-2008 at 12:19 PM.

11-12-2008, 12:40 PM	#4
Spray-Bomb Texas Big Wig Join Date: Jan 2007 Location: Mineola, Texas Posts: 5,620	Re: Blazers Oh dang, even better __________________ Just not low enough... ----------------------------- Sinister Killer

11-12-2008, 06:39 PM	#5
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,475	Re: Blazers I think it's worth it, but finding a buyer is the hard part __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Big Piggy: "Goliath" 07 Kodiak C4500 Lil Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

11-12-2008, 07:18 PM	#6
David Johnson Registered User Join Date: Dec 2004 Location: Shawnee, OK Posts: 614	Re: Blazers Here's a couple more pics. Attached Images

11-12-2008, 08:16 PM	#7
jayharrell Gettin By on Gettin By Join Date: Jan 2008 Location: Cedar Creek, Tx Posts: 1,033	Re: Blazers bump for the nice collection of rallys and buckets. __________________ 69 CST10 LWB 455 Buick 00 S10 2.2 Vin5 76 GL1000 Naked 1bl VW carb "Adios to all the concrete; Gonna get me some dirt road back streets"

11-13-2008, 10:08 AM	#8
David Johnson Registered User Join Date: Dec 2004 Location: Shawnee, OK Posts: 614	Re: Blazers ttt

11-13-2008, 01:23 PM	#9
72BLKCHEYENNE Registered User Join Date: Oct 2005 Location: FREDERICTON, NEW BRUNSWICK CANADA Posts: 130	Re: Blazers what shape is the winshield frame on the 72 is it rusted or bent?

11-13-2008, 02:07 PM	#10
David Johnson Registered User Join Date: Dec 2004 Location: Shawnee, OK Posts: 614	Re: Blazers The Jimmy? It's pretty solid but does have a little rust at the top corners. Very repairable.

11-13-2008, 08:06 PM	#11
David Johnson Registered User Join Date: Dec 2004 Location: Shawnee, OK Posts: 614	Re: Blazers ttt

11-14-2008, 10:03 AM	#12
David Johnson Registered User Join Date: Dec 2004 Location: Shawnee, OK Posts: 614	Re: Blazers Anyone?......Any input?

11-14-2008, 11:12 AM	#13
72BLKCHEYENNE Registered User Join Date: Oct 2005 Location: FREDERICTON, NEW BRUNSWICK CANADA Posts: 130	Re: Blazers No, the wrecked blazer I am in need of a winshield frame......

11-14-2008, 11:57 AM	#14
RLONG Registered User Join Date: Oct 2008 Location: BROOKELAND,TX Posts: 228	Re: Blazers If you decide to part out i could use roll bar and buckets or sell seperate the chevy with no top

11-15-2008, 08:24 PM	#15
David Johnson Registered User Join Date: Dec 2004 Location: Shawnee, OK Posts: 614	Re: Blazers Don't really want to seperate.



Register or Log In To remove these advertisements.

11-15-2008, 10:48 PM	#16
cnshoot Registered User Join Date: Jan 2003 Location: minden Posts: 358	Re: Blazers if you split up please let me know i could use one with the best tub, windshield frame and good driver bedside have everything else __________________ 72 cst 2wd blazer sb soon to have tilt manual 72 gmc swb fleet 2wd bb air tilt auto 93 c/3500 crew-cab dually 03 chevy suburban LT quadrasteer c/2500 4x4

11-16-2008, 01:40 AM	#17
Spray-Bomb Texas Big Wig Join Date: Jan 2007 Location: Mineola, Texas Posts: 5,620	Re: Blazers In case you decide to split em up, I changed my mind & dont need a blazer now, so you can take me off the list __________________ Just not low enough... ----------------------------- Sinister Killer

11-16-2008, 10:36 PM	#18
charlie72 Registered User Join Date: Jun 2007 Location: monterey CA Posts: 7	Re: Blazers im looking for a clean title for my 72. do u have a clean title, vin# plate, and glove box door for sale?? if so whats your price? let me know charlie 831 320 1210

11-24-2008, 10:15 AM	#19
David Johnson Registered User Join Date: Dec 2004 Location: Shawnee, OK Posts: 614	Re: Blazers Anyone?...Offers?

12-22-2008, 04:29 PM	#20
David Johnson Registered User Join Date: Dec 2004 Location: Shawnee, OK Posts: 614	Re: Blazers Anyone have any offers for the collection? I may split them if anyone wants to make a deal.

12-22-2008, 06:01 PM	#21
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,475	Re: Blazers Interested in a possible rear floor section if you split up? (Assuming one of them has a near flawless bed floor in it) __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Big Piggy: "Goliath" 07 Kodiak C4500 Lil Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

12-22-2008, 07:37 PM	#22
kookykrispy The Early Chevy Van Man Join Date: Dec 2008 Location: Seattle, WA Posts: 76	Re: Blazers If you end up splitting them up/parting out... I'm looking the complete power steering system... gearbox & pitman arm, hoses, pump, brackets... and the alternator bracket too! __________________ 64 Chevy Van 65 GMC Handi-Van 99 2500 silverado 4x4 ext cab

12-22-2008, 07:51 PM	#23
Wootdog Senior Member Join Date: Jan 2001 Location: Virginia Beach, Va, USA Posts: 1,676	Re: Blazers Do you have one that is mostly complete with not too much rust? Kerry In Virginia. __________________ 1969 Chevelle 1990 IROC Z Convertible 2002 Silverado LT

12-22-2008, 09:41 PM	#24
David Johnson Registered User Join Date: Dec 2004 Location: Shawnee, OK Posts: 614	Re: Blazers LUV - I think the wrecked tub has a good floor in it but I don't know how I'd get it to you. Kooky - I'll let you know if I part one that is that complete. Woot - All are rusty, have patch panels to repair and none are complete. Just buy the lot and you'll have plenty!

12-22-2008, 10:42 PM	#25
Jtrux I'm a poor spectator Join Date: Aug 2006 Location: San Antonio, Tx Posts: 2,287	Re: Blazers So are we parting out yet? Might be interested in tub if price is right. Might be interested in the whole 70. __________________ 2006 Jeep Unlimited IMPACT ORANGE 1993 Chevy 2500 4x4 ExCab LWB 454/NV4500 Tow rig 1977 Ford F100 2x4 LWB 1st truck I owned, still have it!!! 1979 Ford F150 4x4 SWB Built Ford Tough!!! 1971 Chevy Blazer 350 / SM465 / NP205 UNDER CONSTRUCTION Soon to have a LQ4 6.0!!! Last edited by Jtrux; 12-22-2008 at 10:56 PM.

Register or Log In To remove these advertisements.