Aluminum 8-5.3L emblems are done - The 1947 - Present Chevrolet & GMC Truck Message Board Network

mekdad · 11-20-2008, 01:35 PM

$30.00 to your door.With studs and nuts to mount in the factory location.Opinions are welcome.

dan42 · 11-20-2008, 02:35 PM

Those look really nice - too bad I have a '67, and my '70 doesn't have any chrome on it. I would buy them if I had that motor.

jsbgump · 11-20-2008, 02:46 PM

Thoose look great If i could make them look good on the 06 GMC then I would get some but I don't think they would look good on it.

mekdad · 11-20-2008, 03:14 PM

Quote:

Originally Posted by dan42

Those look really nice - too bad I have a '67, and my '70 doesn't have any chrome on it. I would buy them if I had that motor.

Did you see the other ones?

Quote:

Originally Posted by jsbgump

Thoose look great If i could make them look good on the 06 GMC then I would get some but I don't think they would look good on it.

Aw come on, they would look good

MDC · 11-20-2008, 03:23 PM

His 8-327 emblems look good. I'm considering

jkaylor68gmc · 11-20-2008, 03:25 PM

those are very cool! A+

STOCKISH · 11-20-2008, 03:32 PM

Nice work, they look sweet.

mekdad · 11-21-2008, 11:16 AM

Thanks for the compliments guys!

71cadc10 · 11-21-2008, 06:07 PM

can you do a set with 8 - 6.0L ?

thanks

mekdad · 11-21-2008, 06:29 PM

Quote:

Originally Posted by 71cadc10

can you do a set with 8 - 6.0L ?

thanks

Already done you can reply in that post.This helps me keep them strait.

classicchev · 11-21-2008, 10:11 PM

How about a 502 emblem?

mekdad · 11-22-2008, 10:31 AM

I can do that.If I can get one more for a 502 then the price will stay the same.Otherwise it will be $40.00

468BIGBLOCK · 11-22-2008, 11:42 AM

do you take paypal?

mekdad · 11-22-2008, 11:52 AM

PM sent.

72BlckButy · 11-22-2008, 11:53 AM

Those look great!

ttt...

classicchev · 11-22-2008, 12:03 PM

Im sure there are a few more guys out there with 502's. I will take a set, 40 is fine for me, but if it was me making them I would probably make a couple sets anyways.

PM me your info and I will sent a Paypal and my address.

Darren

mekdad · 11-22-2008, 12:10 PM

PM sent.

1969stepside · 11-22-2008, 07:11 PM

what bout 8-327 or 8-302?

mekdad · 11-23-2008, 01:10 AM

PM your e-mail with a note with what you are ordering and I will e-mail you via. pay pal.

**tallic68** · 10-03-2013, 11:27 AM

Dose anyone know if these are still available? or if there is another option similar?

chevyguy_72 · 10-03-2013, 03:36 PM

Doesn't look like he has been on in a long time...
I wanted some like this too...
Here is another thread of his:
http://67-72chevytrucks.com/vboard/s...d.php?t=317149

sunk99 · 10-07-2013, 12:42 PM

I would like a set of these also!

travelinhunter · 04-05-2017, 09:44 PM

I just ran across this post and I know it's old but are these badges still available…does any know?

I'm installing a 5.3 this weekend in my 71 c10 and would love a set of these badges…

Thanks in advance!

11-20-2008, 01:35 PM	#1
mekdad Registered User Join Date: May 2008 Location: Filer, Idaho Posts: 416	Aluminum 8-5.3L emblems are done $30.00 to your door.With studs and nuts to mount in the factory location.Opinions are welcome. Attached Images __________________ you never know what you can do until you have to undo something you have done!

11-20-2008, 02:35 PM	#2
dan42 Registered User Join Date: Feb 2007 Location: Cali Central Coast Posts: 5,191	Re: Aluminum 8-5.3L emblems are done Those look really nice - too bad I have a '67, and my '70 doesn't have any chrome on it. I would buy them if I had that motor. __________________ '67 SWB Fleetside ZZ4/350/Tremec 5-speed/4link/Scott's IFS - and fun as heck! SOLD Click here to support the board Philippians 4: 6-7

11-20-2008, 02:46 PM	#3
jsbgump Gone Fishing Join Date: Aug 2005 Location: Fort Worth, Texas 76135 Posts: 12,361	Re: Aluminum 8-5.3L emblems are done Thoose look great If i could make them look good on the 06 GMC then I would get some but I don't think they would look good on it. __________________ 68 Chevy Short Fleetside LSX Swap Under Way 3.73 posi 2.5/4 drop Frame of resto has been started 2022 Hyundai Tucson Limited 2019 Chevy Traverse Redline Edition Wifes Ride Build Thread http://67-72chevytrucks.com/vboard/s...=1#post3483616

11-20-2008, 03:23 PM	#5
MDC Registered User Join Date: Oct 2005 Location: N Texas Posts: 727	Re: Aluminum 8-5.3L emblems are done His 8-327 emblems look good. I'm considering __________________ 67 C10 Shortbed 327 05 F150 4x4 NO APPOLOGIES 's 02 Xpress X19 02 Yamaha VMax 150 www.xpressboats.com Nothing says 'poor craftmanship' like wrinkles in your duct tape

11-20-2008, 03:25 PM	#6
jkaylor68gmc Senior Member Join Date: Dec 2005 Location: TN Posts: 2,448	Re: Aluminum 8-5.3L emblems are done those are very cool! A+ __________________ 1947 International KB-1 1957 Chevy Bel-Air riding low 1962 swb fleetside 2002 Chevrolet Silverado 7-inch lift on 35 Daily driver 2016 Chevy Tahoe Better halves ride

11-20-2008, 03:32 PM	#7
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: Aluminum 8-5.3L emblems are done Nice work, they look sweet.

11-21-2008, 11:16 AM	#8
mekdad Registered User Join Date: May 2008 Location: Filer, Idaho Posts: 416	Re: Aluminum 8-5.3L emblems are done Thanks for the compliments guys! __________________ you never know what you can do until you have to undo something you have done!

11-21-2008, 06:07 PM	#9
71cadc10 Registered User Join Date: Apr 2004 Location: Boiling Springs, PA Posts: 435	Re: Aluminum 8-5.3L emblems are done can you do a set with 8 - 6.0L ? thanks __________________ 71 C10 long bed, 2003 6.0L, 06GTO E40, T56, 12bolt 4.10 rear

11-21-2008, 10:11 PM	#11
classicchev Senior Member Join Date: Nov 2003 Location: Calgary Alberta Posts: 1,936	Re: Aluminum 8-5.3L emblems are done How about a 502 emblem? __________________ 67- 72 Parts collecter

11-22-2008, 10:31 AM	#12
mekdad Registered User Join Date: May 2008 Location: Filer, Idaho Posts: 416	Re: Aluminum 8-5.3L emblems are done I can do that.If I can get one more for a 502 then the price will stay the same.Otherwise it will be $40.00 __________________ you never know what you can do until you have to undo something you have done!

11-22-2008, 11:42 AM	#13
468BIGBLOCK MEMBER OF THE JUNK MAN CLUB Join Date: Jul 2001 Location: paragould arkansas 72450 Posts: 425	Re: Aluminum 8-5.3L emblems are done do you take paypal? __________________ I LIKE 67-72 CHEVYS, I HAVE OWNED OVER 150 OF THEM IN THE LAST 25 YEARS..

11-22-2008, 11:52 AM	#14
mekdad Registered User Join Date: May 2008 Location: Filer, Idaho Posts: 416	Re: Aluminum 8-5.3L emblems are done PM sent. __________________ you never know what you can do until you have to undo something you have done!

11-22-2008, 11:53 AM	#15
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: Aluminum 8-5.3L emblems are done Those look great! ttt... __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)

11-22-2008, 12:03 PM	#16
classicchev Senior Member Join Date: Nov 2003 Location: Calgary Alberta Posts: 1,936	Re: Aluminum 8-5.3L emblems are done Im sure there are a few more guys out there with 502's. I will take a set, 40 is fine for me, but if it was me making them I would probably make a couple sets anyways. PM me your info and I will sent a Paypal and my address. Darren __________________ 67- 72 Parts collecter

11-22-2008, 12:10 PM	#17
mekdad Registered User Join Date: May 2008 Location: Filer, Idaho Posts: 416	Re: Aluminum 8-5.3L emblems are done PM sent. __________________ you never know what you can do until you have to undo something you have done!



Register or Log In To remove these advertisements.

11-22-2008, 07:11 PM	#18
1969stepside Registered User Join Date: Feb 2008 Location: Johnson City Tennessee Posts: 1,176	Re: Aluminum 8-5.3L emblems are done what bout 8-327 or 8-302? __________________ Greater love hath no man than to lay down his life for a friend. Members i Have met Earl Slick68 1969 Stepside Build thread http://67-72chevytrucks.com/vboard/s...=1#post4253546 Chevy Trucks the longest lasting most dependable trucks on the road

11-23-2008, 01:10 AM	#19
mekdad Registered User Join Date: May 2008 Location: Filer, Idaho Posts: 416	Re: Aluminum 8-5.3L emblems are done PM your e-mail with a note with what you are ordering and I will e-mail you via. pay pal. __________________ you never know what you can do until you have to undo something you have done!

10-03-2013, 11:27 AM	#20
tallic68 Active Member Join Date: Jan 2011 Location: Buckeye A.Z. Posts: 116	Re: Aluminum 8-5.3L emblems are done Dose anyone know if these are still available? or if there is another option similar?

10-03-2013, 03:36 PM	#21
chevyguy_72 Vintage Evil Join Date: Aug 2005 Location: Broomfield, CO Posts: 956	Re: Aluminum 8-5.3L emblems are done Doesn't look like he has been on in a long time... I wanted some like this too... Here is another thread of his: http://67-72chevytrucks.com/vboard/s...d.php?t=317149

10-07-2013, 12:42 PM	#22
sunk99 Registered User Join Date: Sep 2011 Location: Knoxville TN Posts: 399	Re: Aluminum 8-5.3L emblems are done I would like a set of these also! __________________ ------------ Scott

04-05-2017, 09:44 PM	#23
travelinhunter Registered User Join Date: Apr 2017 Location: nashville tn Posts: 2	Re: Aluminum 8-5.3L emblems are done I just ran across this post and I know it's old but are these badges still available…does any know? I'm installing a 5.3 this weekend in my 71 c10 and would love a set of these badges… Thanks in advance!

Register or Log In To remove these advertisements.