2 cabs,swb box w/tailgate,swb 4X4 frame - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Ricks1971** · 11-23-2008, 05:52 PM

I have 2 cabs a 72 non air cab really clean with doors and a 70 air cab with doors has som small dings and a little rust in the corners and a swb fleet bed with a really clean tailgate (metal floor) and a swb 4X4 bare frame not sure hat to ask for it?
72 non air cab with doors $500
70 air cab with doors $200
swb fleetbox w/tailgate SOLD
sbw 4X4 bare frame M/O

**PICKMUP** · 11-23-2008, 06:13 PM

I usually don't "cheerlead" this stuff, but oh those Cal parts look good!

David Herrera · 11-23-2008, 09:17 PM

Where is Paradise,Ca?

john@thepier · 11-23-2008, 09:55 PM

I am interested in the non ac cab. May I get some more pictures of a few of the key areas where these are prone to rust. I am also interested in the frame, if it is for sure not a 67-68 Thanks John

**Hart_Rod** · 11-23-2008, 10:14 PM

Ledzepp is looking for a SWB, you might want to PM him.

**leddzepp** · 11-23-2008, 10:43 PM

Leddzepp is very interested! Thanks for the heads up Rob.

Where is Paradise? I want to come see that short bed. I mainly just need a passenger bedside, but would buy the whole thing if it is in decent shape. How bad is the damage on each side? Any bondo? The tail light areas look really clean and undamaged.

**Ricks1971** · 11-23-2008, 11:26 PM

Paradise is about a hour and a half from Sacramento. John the only rust I can find on this cab is on the drivers side under the ebrake but can be cleaned up easy. I also have several dors and a couple of fenders too. Think the frame is spoken for but I can put you next in line its a 69 frame.

*mikels* · 11-24-2008, 05:40 PM

Interested in bed,frame.more pictures please..Thanks,Scott

**Ricks1971** · 11-25-2008, 06:30 PM

Here are more parts.
67 stepside longbed with 67 fenders $300
fenders and doors fenders $25 Doors $20 no shipping
1/2 cab bushings $30 plus ride (rubber ones)
pedal pads w/ebrake $25 plus ride
gm key tumblers with doors and ignition keys (new) $25 plus ride
gas tank rubber gromit $5 plus ride
this other stuff I am not sure what they are worth?
4X4 trans brackets?
a/c sbc brackets?
power brake pod?
4X4 engine towers sbc?
power steering pump (sbc)?
rear view mirror with red cover and visor clips?
z clutch bracket with rod?
tailgate cover?

**John Fabris** · 11-26-2008, 12:35 AM

I have seen this stuff in person (rick is 5 minutes from me), good stuff needing very little body work!!

daves71k5 · 11-26-2008, 01:17 AM

Is the tailgate cover dented up at all? If not how much are you asking and would you ship it to Idaho 83211? Plase let me know. Also more pics of it would be great. Also may be interested in pedal pads too if we can make a good package deal. thanks Dave

**Ricks1971** · 11-26-2008, 01:30 AM

Dave one small ding above the C. I'll get back with you on the shipping tomorrow when I find a box.

**tll74** · 11-26-2008, 01:53 AM

I just posted a wanted tread for a 72 cab before noticing this tread so, I would like to get in line on the 72 cab. VERY interested if still available. I'm not that far away. Thanks

crasten123 · 11-26-2008, 01:58 AM

I am interested in the AC brackets. Price???. Can you ship to San jose? Thanks!

**special-K** · 11-26-2008, 06:54 AM

Quote:

Originally Posted by David Herrera

Where is Paradise,Ca?

It`s a place where there`s nice old GM truck sheetmetal in abundance.You can eat fattening foods and stay thin and every girl loves you.LOL

**CUSTOM/10** · 11-26-2008, 09:34 AM

Put me inline for the pedal parts if they get to me.

Gary

70rs/ss · 11-26-2008, 04:53 PM

I might be interested in either cab, but if the AC cab, can you post some picts of the rust?? I am in AZ, but may be headed that way to pick up a single walled Blazer top so I could fit a cab as well??

LMK

**Ricks1971** · 11-26-2008, 10:11 PM

I'll get some more pics of the a/c cab tomorrow. and pics of some more things I have.

john@thepier · 11-27-2008, 12:06 AM

MORE PICS, Cool!!! because, I can see clearly where I am IN line for more pictures and dibs on the frame. John

glimmertwin01 · 11-27-2008, 01:35 PM

Id take a pair of doors for my K5...

PM me with a price for a pair....

man those ochre trucks look better and better ! so is that what they call RUST in CA???

chas350 · 11-27-2008, 04:26 PM

Those cabs look mint!
You should see the rusted crap I have to work with

Yah....Paradise.

chas

john@thepier · 11-27-2008, 07:06 PM

So whats up with this sale?

**Ricks1971** · 11-27-2008, 07:07 PM

here you go 70RS/SS rear right cab corner has some rust.

john@thepier · 11-27-2008, 07:24 PM

Dude I was the third person to respond to your forsale ad here. I haven't gotten the pictures I asked for but others below me in line have and I have some how been past up on for the frame. Its treatment like this that the regulars of this site will take notice of. I'm no longer interested thanks for nothin!

**Ricks1971** · 11-27-2008, 07:36 PM

First off John there were people in line before you for the non air cab and the frame is a 68 and all this large sheet metal is pick up only.

11-23-2008, 05:52 PM	#1
Ricks1971 Senior Member Join Date: Mar 2006 Location: Clarkrange Tennessee Posts: 1,787	2 cabs,swb box w/tailgate,swb 4X4 frame I have 2 cabs a 72 non air cab really clean with doors and a 70 air cab with doors has som small dings and a little rust in the corners and a swb fleet bed with a really clean tailgate (metal floor) and a swb 4X4 bare frame not sure hat to ask for it? 72 non air cab with doors $500 70 air cab with doors $200 swb fleetbox w/tailgate SOLD sbw 4X4 bare frame M/O Last edited by Ricks1971; 11-27-2008 at 05:24 PM. Reason: sold a item

11-23-2008, 06:13 PM	#2
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,158	Re: 2 cabs,swb box w/tailgate,swb 4X4 frame I usually don't "cheerlead" this stuff, but oh those Cal parts look good!

11-23-2008, 09:17 PM	#3
David Herrera Registered User Join Date: Mar 2007 Location: Gilroy,Ca Posts: 6	Re: 2 cabs,swb box w/tailgate,swb 4X4 frame Where is Paradise,Ca?

11-23-2008, 09:55 PM	#4
john@thepier Senior Member Join Date: Aug 2004 Location: Lake Geneva, WI 53147 Posts: 970	Re: 2 cabs,swb box w/tailgate,swb 4X4 frame I am interested in the non ac cab. May I get some more pictures of a few of the key areas where these are prone to rust. I am also interested in the frame, if it is for sure not a 67-68 Thanks John

11-23-2008, 10:14 PM	#5
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,858	Re: 2 cabs,swb box w/tailgate,swb 4X4 frame Ledzepp is looking for a SWB, you might want to PM him. __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3

11-23-2008, 10:43 PM	#6
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 20,036	Re: 2 cabs,swb box w/tailgate,swb 4X4 frame Leddzepp is very interested! Thanks for the heads up Rob. Where is Paradise? I want to come see that short bed. I mainly just need a passenger bedside, but would buy the whole thing if it is in decent shape. How bad is the damage on each side? Any bondo? The tail light areas look really clean and undamaged.

11-23-2008, 11:26 PM	#7
Ricks1971 Senior Member Join Date: Mar 2006 Location: Clarkrange Tennessee Posts: 1,787	Re: 2 cabs,swb box w/tailgate,swb 4X4 frame Paradise is about a hour and a half from Sacramento. John the only rust I can find on this cab is on the drivers side under the ebrake but can be cleaned up easy. I also have several dors and a couple of fenders too. Think the frame is spoken for but I can put you next in line its a 69 frame.

11-24-2008, 05:40 PM	#8
mikels Account Suspended Join Date: Dec 2007 Location: Billings,Montana Posts: 82	Re: 2 cabs,swb box w/tailgate,swb 4X4 frame Interested in bed,frame.more pictures please..Thanks,Scott

11-25-2008, 06:30 PM	#9
Ricks1971 Senior Member Join Date: Mar 2006 Location: Clarkrange Tennessee Posts: 1,787	Re: 2 cabs,swb box w/tailgate,swb 4X4 frame Here are more parts. 67 stepside longbed with 67 fenders $300 fenders and doors fenders $25 Doors $20 no shipping 1/2 cab bushings $30 plus ride (rubber ones) pedal pads w/ebrake $25 plus ride gm key tumblers with doors and ignition keys (new) $25 plus ride gas tank rubber gromit $5 plus ride this other stuff I am not sure what they are worth? 4X4 trans brackets? a/c sbc brackets? power brake pod? 4X4 engine towers sbc? power steering pump (sbc)? rear view mirror with red cover and visor clips? z clutch bracket with rod? tailgate cover?

11-26-2008, 12:35 AM	#10
John Fabris TOTY 2006 Join Date: Dec 1999 Location: Magalia CA USA Posts: 2,270	Re: 2 cabs,swb box w/tailgate,swb 4X4 frame I have seen this stuff in person (rick is 5 minutes from me), good stuff needing very little body work!! __________________ John Fabris 67 C10 SWB

11-26-2008, 01:17 AM	#11
daves71k5 Registered User Join Date: Jan 2002 Location: American Falls, Idaho-USA Posts: 318	Re: 2 cabs,swb box w/tailgate,swb 4X4 frame Is the tailgate cover dented up at all? If not how much are you asking and would you ship it to Idaho 83211? Plase let me know. Also more pics of it would be great. Also may be interested in pedal pads too if we can make a good package deal. thanks Dave

11-26-2008, 01:30 AM	#12
Ricks1971 Senior Member Join Date: Mar 2006 Location: Clarkrange Tennessee Posts: 1,787	Re: 2 cabs,swb box w/tailgate,swb 4X4 frame Dave one small ding above the C. I'll get back with you on the shipping tomorrow when I find a box.

11-26-2008, 01:53 AM	#13
tll74 "Junkyard Dog" Join Date: Jan 2008 Location: Springfield Oregon Posts: 2,527	Re: 2 cabs,swb box w/tailgate,swb 4X4 frame I just posted a wanted tread for a 72 cab before noticing this tread so, I would like to get in line on the 72 cab. VERY interested if still available. I'm not that far away. Thanks

11-26-2008, 01:58 AM	#14
crasten123 Registered User Join Date: Mar 2008 Location: San Jose, ca Posts: 157	Re: 2 cabs,swb box w/tailgate,swb 4X4 frame I am interested in the AC brackets. Price???. Can you ship to San jose? Thanks! __________________ [B]72 Cheyenne SWB

11-26-2008, 09:34 AM	#16
CUSTOM/10 Senior Member Join Date: May 2003 Location: Sandown, NH Posts: 2,854	Re: 2 cabs,swb box w/tailgate,swb 4X4 frame Put me inline for the pedal parts if they get to me. Gary __________________ Gary 72 SWB 4x4 My 72 SWB Build http://67-72chevytrucks.com/vboard/s...d.php?t=259859



Register or Log In To remove these advertisements.

11-26-2008, 04:53 PM	#17
70rs/ss Registered User Join Date: Dec 2004 Location: Northern AZ Posts: 7,270	Re: 2 cabs,swb box w/tailgate,swb 4X4 frame I might be interested in either cab, but if the AC cab, can you post some picts of the rust?? I am in AZ, but may be headed that way to pick up a single walled Blazer top so I could fit a cab as well?? LMK

11-26-2008, 10:11 PM	#18
Ricks1971 Senior Member Join Date: Mar 2006 Location: Clarkrange Tennessee Posts: 1,787	Re: 2 cabs,swb box w/tailgate,swb 4X4 frame I'll get some more pics of the a/c cab tomorrow. and pics of some more things I have.

11-27-2008, 12:06 AM	#19
john@thepier Senior Member Join Date: Aug 2004 Location: Lake Geneva, WI 53147 Posts: 970	Re: 2 cabs,swb box w/tailgate,swb 4X4 frame MORE PICS, Cool!!! because, I can see clearly where I am IN line for more pictures and dibs on the frame. John

11-27-2008, 01:35 PM	#20
glimmertwin01 Registered User Join Date: Mar 2008 Location: Rochester NY Posts: 1,022	Re: 2 cabs,swb box w/tailgate,swb 4X4 frame Id take a pair of doors for my K5... PM me with a price for a pair.... man those ochre trucks look better and better ! so is that what they call RUST in CA??? __________________ 67/68 K/20 "The BEAST" 68 K15 V6 LWB. 73 K20 GMC Burb "The Bomber" 74 K/5 74 K20 Custom Deluxe 86 K10 Shorty 92 K2500 Burb 95 K2500 GMC Life is what you make it Live each day like it was your last Old GM Trucks never go out of style

11-27-2008, 04:26 PM	#21
chas350 Registered User Join Date: Mar 2007 Location: Connecticut Posts: 581	Re: 2 cabs,swb box w/tailgate,swb 4X4 frame Those cabs look mint! You should see the rusted crap I have to work with Yah....Paradise. chas __________________ "I'll Procrastinate Tomorrow" quote by LEEVON 71 K10 long fleet (sons truck) new 370hp 355, sm465 np205, 3.73's 33's 70 K20 long fleet 98 G3500 work van

11-27-2008, 07:06 PM	#22
john@thepier Senior Member Join Date: Aug 2004 Location: Lake Geneva, WI 53147 Posts: 970	Re: 2 cabs,swb box w/tailgate,swb 4X4 frame So whats up with this sale?

11-27-2008, 07:07 PM	#23
Ricks1971 Senior Member Join Date: Mar 2006 Location: Clarkrange Tennessee Posts: 1,787	Re: 2 cabs,swb box w/tailgate,swb 4X4 frame here you go 70RS/SS rear right cab corner has some rust.

11-27-2008, 07:24 PM	#24
john@thepier Senior Member Join Date: Aug 2004 Location: Lake Geneva, WI 53147 Posts: 970	Re: 2 cabs,swb box w/tailgate,swb 4X4 frame Dude I was the third person to respond to your forsale ad here. I haven't gotten the pictures I asked for but others below me in line have and I have some how been past up on for the frame. Its treatment like this that the regulars of this site will take notice of. I'm no longer interested thanks for nothin!

11-27-2008, 07:36 PM	#25
Ricks1971 Senior Member Join Date: Mar 2006 Location: Clarkrange Tennessee Posts: 1,787	Re: 2 cabs,swb box w/tailgate,swb 4X4 frame First off John there were people in line before you for the non air cab and the frame is a 68 and all this large sheet metal is pick up only.

Register or Log In To remove these advertisements.