Are these the right big block headers?

[cochino12]

So I know there are several people here running camaro or chevelle 3/4 length headers for their small blocks but does the same configuration work with a big block? I am thinking of ordering these for my 2wd k5 w/454

http://store.summitracing.com/partde...5&autoview=sku

[454HO]

I am curious about those too. My Hedman Elites hang down too low. Patriot also makes the same style header, they call it a clippster. I think it is a little meatier since it has 16 gauge tubes and a 3/8" flange. Unfortunately it uses a standard 3-bolt flange instead of the ball/socket on the collector.

http://store.summitracing.com/partde...5&autoview=sku

[cochino12]

ok after doing a little more searching it looks like they should fit fine.

[Captkaos]

Those "should" fit, but I haven't used them. I am using Sanderson headers
http://www.sandersonheaders.com/prod...products_id=33

[cochino12]

Originally Posted by Captkaos

Those "should" fit, but I haven't used them. I am using Sanderson headers
http://www.sandersonheaders.com/prod...products_id=33

I would love to have another set of Sandersons but they just arent in the budget for this truck, I found some hooker headers for a pretty decent price too, I think I'll go that route

[Captkaos]

I looked at the pic, they look like they would work. Post back if you get them. Hookers are decently priced in my opinion, so you can't go wrong by getting them.

[87Lowrider]

Originally Posted by Captkaos

I looked at the pic, they look like they would work. Post back if you get them. Hookers are decently priced in my opinion, so you can't go wrong by getting them.

Chris,

My wife came outside the other day and stopped me saying "I don't like that", I said, What?

She pointed at the headers and said they have to be shiny!!



Here she goes again... making me buy more stuff for the lowrider.

So, now, I like those Sanderson's but they may not be "good enuf" for her approval. I may need to go stainless or billet to meet her standards.


Kenny

[Square84]

hey kenny i'm interested in running the same fuel line that you are but all the pics show it on an electric choke. so my question is the manual choke carbs have a bracket that holds the choke cable is it in the way of that fuel line? sorry to threadjack

[87Lowrider]

Originally Posted by Square84

hey kenny i'm interested in running the same fuel line that you are but all the pics show it on an electric choke. so my question is the manual choke carbs have a bracket that holds the choke cable is it in the way of that fuel line? sorry to threadjack

I'll PM you so as not to hijack.

[Captkaos]

Kenny,
you know you can get sandersons coated right?

[87Lowrider]

Originally Posted by Captkaos

Kenny,
you know you can get sandersons coated right?

Me Likey!