4 speed Transmission Cover - The 1947 - Present Chevrolet & GMC Truck Message Board Network

dumbfarmboy · 12-04-2008, 02:59 PM

Does anyone have a 4 speed transmission cover that will fit a '47 body? I have the parking brake beside the shifter. Can't find a new part anywhere but need to figure out the cover since I am moving from a torque tube to the 4 on the floor tranny.

Funeral · 12-04-2008, 04:58 PM

Thats a good question, right now mine is just fabed with a piece of steel it would be nice to know if we could get one, or maybe some pics of what they were originally covered with.

54 jimmy · 12-04-2008, 05:14 PM

i have one off my 54 gmc. i think they are the same. it has a very small spot of rot on the one corner that can be fixed easy other than that is is very solid. $40.00 plus shipping. or you could go with a new fiberglass one lmc part # is38-2421 $79.95 harmons part# is t710050 $46.95 i'll get a pic onf the one i have for you tomorrow if you are intrested.

dumbfarmboy · 12-04-2008, 05:18 PM

Awesome, send me the details and I can blast it and fab the metal to fix. Thanks...(I can pay through paypal)

54 jimmy · 12-04-2008, 05:46 PM

sounds good pm me with your adress so i can get a total with shipping for you. paypal works for me.

dumbfarmboy · 12-04-2008, 06:51 PM

7203 union grove church road
chapel hill, nc
27516

54 jimmy · 12-07-2008, 12:41 PM

hers a pic onf the cover dumbfarmboy

here are the measurements of the cover Funeral

dumbfarmboy · 12-09-2008, 06:09 PM

Thanks...the one I need has the hole beside the shifter hole for the emergency brake. I am traveling all week but will get back to the project next week to see if it is right everywhere else...if so then I can fab a new hole. Sorry to be a pest, but how much does the plate rise over the tranny?

54 jimmy · 12-12-2008, 03:06 PM

they were all the same. you are correct that you will need to make a hole for the floor e-brake but thats what the factory did. so it will work if you get one from an aftemarket you will have to do the same thing and cut out a hole too.

dumbfarmboy · 12-15-2008, 06:10 PM

Thanks, I will send you the money via payapl if that is all right...was it 50 bucks all together? Also send me your email addy again if you would...sorry!

12-04-2008, 02:59 PM	#1
dumbfarmboy Registered User Join Date: Oct 2008 Location: chapel Hill, NC Posts: 79	4 speed Transmission Cover Does anyone have a 4 speed transmission cover that will fit a '47 body? I have the parking brake beside the shifter. Can't find a new part anywhere but need to figure out the cover since I am moving from a torque tube to the 4 on the floor tranny. __________________ Help Wanted! http://67-72chevytrucks.com/vboard/i...ack::ack::ack:

12-04-2008, 04:58 PM	#2
Funeral Registered User Join Date: Oct 2008 Location: Ocean Springs, MS Posts: 117	Re: 4 speed Transmission Cover Thats a good question, right now mine is just fabed with a piece of steel it would be nice to know if we could get one, or maybe some pics of what they were originally covered with.

12-04-2008, 05:14 PM	#3
54 jimmy Registered User Join Date: Oct 2007 Location: pittston,PA Posts: 1,183	Re: 4 speed Transmission Cover i have one off my 54 gmc. i think they are the same. it has a very small spot of rot on the one corner that can be fixed easy other than that is is very solid. $40.00 plus shipping. or you could go with a new fiberglass one lmc part # is38-2421 $79.95 harmons part# is t710050 $46.95 i'll get a pic onf the one i have for you tomorrow if you are intrested. __________________ There is nothing you can't fix with a BFH or a FIRE WRENCH. 1997 chevy k1500 ext cab z71 (daily driver) sold 1996 chevy k1500 reg cab 4x4(daily driver)totaled 2008jeep patriot (wife's daily driver 2008 chevy 1500 ext cab 4x4 sold 2011 chevy 1500 crew cab ltz (daily driver) 1996 chevy 1500 reg cab 4x4 project sold 2006 pontiac grand prix gxp (daily work commuter)

12-04-2008, 05:18 PM	#4
dumbfarmboy Registered User Join Date: Oct 2008 Location: chapel Hill, NC Posts: 79	Re: 4 speed Transmission Cover Awesome, send me the details and I can blast it and fab the metal to fix. Thanks...(I can pay through paypal) __________________ Help Wanted! http://67-72chevytrucks.com/vboard/i...ack::ack::ack:

12-04-2008, 05:46 PM	#5
54 jimmy Registered User Join Date: Oct 2007 Location: pittston,PA Posts: 1,183	Re: 4 speed Transmission Cover sounds good pm me with your adress so i can get a total with shipping for you. paypal works for me. __________________ There is nothing you can't fix with a BFH or a FIRE WRENCH. 1997 chevy k1500 ext cab z71 (daily driver) sold 1996 chevy k1500 reg cab 4x4(daily driver)totaled 2008jeep patriot (wife's daily driver 2008 chevy 1500 ext cab 4x4 sold 2011 chevy 1500 crew cab ltz (daily driver) 1996 chevy 1500 reg cab 4x4 project sold 2006 pontiac grand prix gxp (daily work commuter) Last edited by 54 jimmy; 12-04-2008 at 05:55 PM.

12-04-2008, 06:51 PM	#6
dumbfarmboy Registered User Join Date: Oct 2008 Location: chapel Hill, NC Posts: 79	Re: 4 speed Transmission Cover 7203 union grove church road chapel hill, nc 27516 __________________ Help Wanted! http://67-72chevytrucks.com/vboard/i...ack::ack::ack:

12-07-2008, 12:41 PM	#7
54 jimmy Registered User Join Date: Oct 2007 Location: pittston,PA Posts: 1,183	Re: 4 speed Transmission Cover hers a pic onf the cover dumbfarmboy here are the measurements of the cover Funeral Attached Images __________________ There is nothing you can't fix with a BFH or a FIRE WRENCH. 1997 chevy k1500 ext cab z71 (daily driver) sold 1996 chevy k1500 reg cab 4x4(daily driver)totaled 2008jeep patriot (wife's daily driver 2008 chevy 1500 ext cab 4x4 sold 2011 chevy 1500 crew cab ltz (daily driver) 1996 chevy 1500 reg cab 4x4 project sold 2006 pontiac grand prix gxp (daily work commuter)

12-09-2008, 06:09 PM	#8
dumbfarmboy Registered User Join Date: Oct 2008 Location: chapel Hill, NC Posts: 79	Re: 4 speed Transmission Cover Thanks...the one I need has the hole beside the shifter hole for the emergency brake. I am traveling all week but will get back to the project next week to see if it is right everywhere else...if so then I can fab a new hole. Sorry to be a pest, but how much does the plate rise over the tranny? __________________ Help Wanted! http://67-72chevytrucks.com/vboard/i...ack::ack::ack:

12-12-2008, 03:06 PM	#9
54 jimmy Registered User Join Date: Oct 2007 Location: pittston,PA Posts: 1,183	Re: 4 speed Transmission Cover they were all the same. you are correct that you will need to make a hole for the floor e-brake but thats what the factory did. so it will work if you get one from an aftemarket you will have to do the same thing and cut out a hole too. __________________ There is nothing you can't fix with a BFH or a FIRE WRENCH. 1997 chevy k1500 ext cab z71 (daily driver) sold 1996 chevy k1500 reg cab 4x4(daily driver)totaled 2008jeep patriot (wife's daily driver 2008 chevy 1500 ext cab 4x4 sold 2011 chevy 1500 crew cab ltz (daily driver) 1996 chevy 1500 reg cab 4x4 project sold 2006 pontiac grand prix gxp (daily work commuter) Last edited by 54 jimmy; 12-12-2008 at 03:06 PM.

12-15-2008, 06:10 PM	#10
dumbfarmboy Registered User Join Date: Oct 2008 Location: chapel Hill, NC Posts: 79	Re: 4 speed Transmission Cover Thanks, I will send you the money via payapl if that is all right...was it 50 bucks all together? Also send me your email addy again if you would...sorry! __________________ Help Wanted! http://67-72chevytrucks.com/vboard/i...ack::ack::ack:



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.