Serial number on the frame.....? Where - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Vince M · 11-30-2002, 04:45 PM

Got this new truck..now I'm gong over it and wanted to check the frame number against the cab. Where do I start scapeing..?

Rod · 11-30-2002, 05:04 PM

Driver side frame rail on top.... near the steering box.

JHickson6 · 11-30-2002, 07:14 PM

Mine was right where the drivers door would have been on the driverside framerail on the top edge. I couldn't see it until i sandblasted the frame!

71402BB · 11-30-2002, 07:18 PM

Generally it's found anywhere between the front drivers side frame horn and that first cab mount! Good luck -Brian

Longhorn Man · 12-01-2002, 01:41 AM

I've always found it right here.

Vince M · 12-01-2002, 10:55 AM

Thanks for all the help....let the wire brushing begin.

I am correct in thinking that the number on the frame should match my VIN number right..? I know that the GMC's don't have the number but Chevy's do..Is this correct.

Vince M · 12-01-2002, 01:07 PM

Well I found my VIN number on the frame just where longhornmail said it was. (Actually about an inch in front of his finger). Thanks again for the help.

It did match my VIN plate so there was a big smile on my face. It's hard to track what is original and what's not without that option sticker on the glovebox.

Plowing ahead with the rest of the research...

Longhorn Man · 12-01-2002, 01:19 PM

GMCs have the VIN there too, it was '67 trucks that didn't have it.

11-30-2002, 04:45 PM	#1
Vince M Senior Member Join Date: Apr 2000 Location: Orlando, FL Posts: 1,076	Serial number on the frame.....? Where Got this new truck..now I'm gong over it and wanted to check the frame number against the cab. Where do I start scapeing..? __________________ ............................................................ 68 Chevy CST SWB w/LS1, carb & 700r4. Golden Anniversary clone with a few improvements.

11-30-2002, 05:04 PM	#2
Rod Join Date: Dec 1999 Location: Eastern - Manitoba Canada, Winnipeg Posts: 4,369	Driver side frame rail on top.... near the steering box. __________________ Senior active founding member. 70 3/4 ton GMC Suburban 4x4 250/4 spd. 71 1/2 ton Suburban Chevy 4x4, 350/350 72 Chev 1 ton tow truck 402BB w/Holmes 440 wrecker on propane 2005 FLSTSCI Harley Springer 85 FXSB Harley Lowrider 72 Triumph 650 Bonneville 5spd "Poor people don't have hobbies" Quote from wife.

11-30-2002, 07:14 PM	#3
JHickson6 I Love This Stuff! Join Date: May 2002 Location: Winnipeg, Manitoba, Canada Posts: 739	Mine was right where the drivers door would have been on the driverside framerail on the top edge. I couldn't see it until i sandblasted the frame! Attached Images __________________ My Rides 1967 C10 In Pieces for now 1985 Ford B700 SourPuss Bus - BIG BLUE 2003 Silverado CITY WORKER YELLOW!!

11-30-2002, 07:18 PM	#4
71402BB now thats a true COON DOG Join Date: Nov 2000 Location: Franconia, NH Posts: 1,977	Generally it's found anywhere between the front drivers side frame horn and that first cab mount! Good luck -Brian __________________ current project 67 402BB stout th350 3.08's with a locker. Plan on tubs 18.5's out back! (thanks Burnsman!) 71 SWB Stepside, was a 250, now is a 402 Big Block with 4 speed and 3.73's ( was crushed by a tree, bed sold, motor pulled) was my first truck!... oh well... 72 LWB 4x4 350 4-speed 3.08's posi wearing army olive drab green (SOLD!) 68 BURB 50TH LOOKALIKE work in progress, soon to have 250-I6 with a 3-speed on the tree 4.11's and posi ( currently sitting in back yard tarped awaiting time, $$$, and lots of love!) 67 1 TON- work truck 396 sm 420 4-speed, flat bed 4.57 gears "big red" (my first landscape truck, very rusty and crusty! but still gets the job done when needed!)

12-01-2002, 01:41 AM	#5
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	I've always found it right here. Attached Images

12-01-2002, 10:55 AM	#6
Vince M Senior Member Join Date: Apr 2000 Location: Orlando, FL Posts: 1,076	Thanks for all the help....let the wire brushing begin. I am correct in thinking that the number on the frame should match my VIN number right..? I know that the GMC's don't have the number but Chevy's do..Is this correct. __________________ ............................................................ 68 Chevy CST SWB w/LS1, carb & 700r4. Golden Anniversary clone with a few improvements.

12-01-2002, 01:07 PM	#7
Vince M Senior Member Join Date: Apr 2000 Location: Orlando, FL Posts: 1,076	Well I found my VIN number on the frame just where longhornmail said it was. (Actually about an inch in front of his finger). Thanks again for the help. It did match my VIN plate so there was a big smile on my face. It's hard to track what is original and what's not without that option sticker on the glovebox. Plowing ahead with the rest of the research... __________________ ............................................................ 68 Chevy CST SWB w/LS1, carb & 700r4. Golden Anniversary clone with a few improvements.

12-01-2002, 01:19 PM	#8
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	GMCs have the VIN there too, it was '67 trucks that didn't have it.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.