soft touch rev control? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

shrtbx · 12-05-2008, 11:56 PM

What does a soft touch rev control do?

djracer · 12-06-2008, 02:42 AM

It makes the ignition misfire to limit rpms.

Ryan Hubbard · 12-10-2008, 08:32 PM

It randomly takes out cylinders to control the rpms at the rev limit. SO you are not loading up a few cylinders.

Marv D · 12-10-2008, 10:03 PM

Like said, it drops random cylinders, and the processor will not take out the same cylinder two cycles in a row. With the old studder boxes the ignition was in effect shut of and on repeatedly to keep rpm's from going over a set limit. This caused cylinders to load up with fuel and very often a big ol bog at the launch, or dead cylinders for the whole pass. The 'soft touch' was developed by Mallory if I remember correctly and is now a standard (in some form by numerous names) in all rev limiting ignitions.

12-05-2008, 11:56 PM	#1
shrtbx Registered User Join Date: Feb 2007 Location: los angeles Posts: 202	soft touch rev control? What does a soft touch rev control do?

12-06-2008, 02:42 AM	#2
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,892	Re: soft touch rev control? It makes the ignition misfire to limit rpms. __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

12-10-2008, 08:32 PM	#3
Ryan Hubbard Registered User Join Date: Aug 2007 Location: Mission Viejo, CA Posts: 288	Re: soft touch rev control? It randomly takes out cylinders to control the rpms at the rev limit. SO you are not loading up a few cylinders.

12-10-2008, 10:03 PM	#4
Marv D Registered Truck Offender Join Date: May 2008 Location: hells training ground (aka Ariz) Posts: 3,118	Re: soft touch rev control? Like said, it drops random cylinders, and the processor will not take out the same cylinder two cycles in a row. With the old studder boxes the ignition was in effect shut of and on repeatedly to keep rpm's from going over a set limit. This caused cylinders to load up with fuel and very often a big ol bog at the launch, or dead cylinders for the whole pass. The 'soft touch' was developed by Mallory if I remember correctly and is now a standard (in some form by numerous names) in all rev limiting ignitions. __________________ Still playin with trucks, even at my age! When you're dead, it's only a problem for the people around you, because you don't know you're dead. .....It's kinda the same when your STUPID. I just did my taxes and reviewed my SS statement. Thanks to the current administration it looks like I will only have to work till noon on the day of my funeral.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.