Looking for this heavy bumper? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Prostreet 72 · 12-10-2008, 09:11 AM

I am building this second truck, and for some reason I am intrested in using this bumper pictured below.

Dose anyone have one of these they don't want? I hate the aftermarket step bumpers offered.

Chris
AKA:Prostreet 72

**special-K** · 12-10-2008, 09:22 AM

I like the step bumpers from this era.They are 4" tall and dropped 4" to aid entry into bed.From`73 on,they went to 8" with the top up against the tailgate which leaves a tiny corner of the bumper for a step.The narrow looks better and it`s just what belongs on these trucks.That one is aftermarket and will be tough to find the same one.It would be easy to make.I like the GM step bumpers offered in these years.They are also twice as strong as the 73-up style.

**lks dcvn** · 12-10-2008, 09:24 AM

I may have one - but - it is from a 67 Texas Truck so it is stamped Friendly Chevrolet - Dallas Texas.

It is on the truck shell in my yard. I can get pix when I get home...if you would like.

Since the weather has turned - not sure how easy it will be to get the bumper off while it is soggy out though...it is likely rusted on there - since the front was as well (had to use a cut off wheel to get the front bumper bolts out).

**Added an old shot of the truck before I yanked the engine/trans from it so you could see the bumper**

Have anything to trade?

Prostreet 72 · 12-10-2008, 09:45 AM

Quote:

Originally Posted by lks dcvn

I may have one - but - it is from a 67 Texas Truck so it is stamped Friendly Chevrolet - Dallas Texas.

It is on the truck shell in my yard. I can get pix when I get home...if you would like.

Since the weather has turned - not sure how easy it will be to get the bumper off while it is soggy out though...it is likely rusted on there - since the front was as well (had to use a cut off wheel to get the front bumper bolts out).

**Added an old shot of the truck before I yanked the engine/trans from it so you could see the bumper**

Have anything to trade?

What are you looking for? I have a few parts for these trucks.

I will most likely need the brackets as well.

**WIDESIDE72** · 12-10-2008, 11:00 AM

I believe the brackets are welded to the bumper on these aftermarket bumpers. Every one I have seen has been.

Bus Ted Knuckle · 12-10-2008, 11:02 AM

they are dealer added bumpers. Usually have dealers name stamped into it. THere was a thread a year ago or so about them, and it seems they were mostly a southern/south eastern thing. They are very common in my area.

grayw0lf · 12-10-2008, 11:14 AM

They're quite common here too. The ones areound here are usually bolted on, no welding. The brackets are cut from 1/2" steel plate.

Prostreet 72 · 12-10-2008, 11:14 AM

Quote:

Originally Posted by Bus Ted Knuckle

they are dealer added bumpers. Usually have dealers name stamped into it. THere was a thread a year ago or so about them, and it seems they were mostly a southern/south eastern thing. They are very common in my area.

Dose anyone want to let one go?

Stock72c10 · 12-10-2008, 11:17 AM

Here is the one I have on my truck, I always thought it was OEM, but now I am not sure? Mine doesn't have any dealer name stamped on it. Unfortunately I need to keep mine until I can afford chrome for the front and rear bumpers.

ChevLoRay · 12-10-2008, 12:06 PM

You can have the one that is on my truck. Come and get it!!

70jnktrk · 12-10-2008, 12:07 PM

Quote:

Originally Posted by Prostreet 72

Dose anyone want to let one go?

I've got this beast...says Ricks Hitch Works Phoenix on it...Bolts in place..feels like it weighs 2000lbs...a case of La Batt Blue would take it...toooooo heavy to ship I would think....

...

chevy_mike · 12-10-2008, 12:19 PM

Here is the one I took off my '68. It looks to be original as the license plate light has a factory connector and it plugged into the factory wiring harness.

It's in the for sale area.

bigbadchev72 · 12-10-2008, 12:39 PM

Why not build one? here is mine

*Puropedo* · 12-10-2008, 12:45 PM

I've got 2-3 of those sitting around my shop,, u are welcome to comeby and pick them up for free (maybe bring a six pack). Cant help u on the shipping, sorry

**special-K** · 12-10-2008, 12:51 PM

Quote:

Originally Posted by Stock72c10

Here is the one I have on my truck, I always thought it was OEM, but now I am not sure? Mine doesn't have any dealer name stamped on it. Unfortunately I need to keep mine until I can afford chrome for the front and rear bumpers.

That`s the`72-only factory Step Bumper.It`s the first stamped steel and the only stamped 4" bumper.The factory step bumpers from the prior years looks simular but is made frame c-channel and way stronger.GM didn`t make these bumpers but did offer the option.The factory ones are all the same.Anything else is aftermarket.The dealer I.D on the bumper was a regional thing.

**CPNE** · 12-10-2008, 01:03 PM

I have that EXACT same bumper here in NH (by way of Phoenix I guess). Can you take pics of how it bolts on? I think I have an idea but pics would help me greatly.

Thanks

Quote:

Originally Posted by 70jnktrk

I've got this beast...says Ricks Hitch Works Phoenix on it...Bolts in place..feels like it weighs 2000lbs...a case of La Batt Blue would take it...toooooo heavy to ship I would think....

...

berencam · 12-10-2008, 01:14 PM

l had one like what your looking for, and you can have it.... just pay to get the truck out of the tow yard and its yours lol.

**fine69** · 12-10-2008, 01:21 PM

Hey. I have one here in Ohio. Can get pics soon.

Originally off a rustfree California truck.

Pm me if interested.

Stock72c10 · 12-10-2008, 01:26 PM

Quote:

Originally Posted by special-K

That`s the`72-only factory Step Bumper.It`s the first stamped steel and the only stamped 4" bumper.The factory step bumpers from the prior years looks simular but is made frame c-channel and way stronger.

I guess it has held up pretty well for the last 36 years, hopefully it will last another 36 since I only pull a Class 1 with it. I guess I should keep it so if I ever sell the truck on ebay I can tout the "rare" stamped bumper

Bus Ted Knuckle · 12-10-2008, 01:27 PM

Quote:

Originally Posted by Prostreet 72

Dose anyone want to let one go?

I've got two of them that you can have, but both have seen better days. you will have to come and get them though!

lax54650 · 12-10-2008, 01:39 PM

i have one just like chevy mikes you can have i am on wis. west coast.

70jnktrk · 12-10-2008, 01:56 PM

Quote:

Originally Posted by CPNE

I have that EXACT same bumper here in NH (by way of Phoenix I guess). Can you take pics of how it bolts on? I think I have an idea but pics would help me greatly.

Thanks

I'll snap some photos of the mounting brackets later today and post them. It is not on the truck now.replaced with a sport bumper....but it is really simple and straight forward how it attaches..S

**CPNE** · 12-10-2008, 02:07 PM

Quote:

Originally Posted by 70jnktrk

I'll snap some photos of the mounting brackets later today and post them. It is not on the truck now.replaced with a sport bumper....but it is really simple and straight forward how it attaches..S

Thanks

70jnktrk · 12-10-2008, 02:11 PM

Quote:

Originally Posted by CPNE

I have that EXACT same bumper here in NH (by way of Phoenix I guess). Can you take pics of how it bolts on? I think I have an idea but pics would help me greatly.

Thanks

cpne...here ya go...4 bolts to the frame...

**CPNE** · 12-10-2008, 02:47 PM

Thank you. Mines a bit different, perhaps because i was on a SWB 4x4 and the spring perches forced a different mount.

I'll stop thread-jacking the OP's post now.

12-10-2008, 09:11 AM	#1
Prostreet 72 Prostreet 72 Join Date: Oct 2008 Location: Goodrich, Michigan Posts: 278	Looking for this heavy bumper? I am building this second truck, and for some reason I am intrested in using this bumper pictured below. Dose anyone have one of these they don't want? I hate the aftermarket step bumpers offered. Chris AKA:Prostreet 72 Attached Images

12-10-2008, 09:22 AM	#2
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: Looking for this heavy bumper? I like the step bumpers from this era.They are 4" tall and dropped 4" to aid entry into bed.From`73 on,they went to 8" with the top up against the tailgate which leaves a tiny corner of the bumper for a step.The narrow looks better and it`s just what belongs on these trucks.That one is aftermarket and will be tough to find the same one.It would be easy to make.I like the GM step bumpers offered in these years.They are also twice as strong as the 73-up style. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

12-10-2008, 09:24 AM	#3
lks dcvn Registered User Join Date: Jan 2007 Location: Columbus, Ohio Posts: 4,348	Re: Looking for this heavy bumper? I may have one - but - it is from a 67 Texas Truck so it is stamped Friendly Chevrolet - Dallas Texas. It is on the truck shell in my yard. I can get pix when I get home...if you would like. Since the weather has turned - not sure how easy it will be to get the bumper off while it is soggy out though...it is likely rusted on there - since the front was as well (had to use a cut off wheel to get the front bumper bolts out). Added an old shot of the truck before I yanked the engine/trans from it so you could see the bumper Have anything to trade? Attached Images Last edited by lks dcvn; 12-10-2008 at 09:28 AM.

12-10-2008, 11:00 AM	#5
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,500	Re: Looking for this heavy bumper? I believe the brackets are welded to the bumper on these aftermarket bumpers. Every one I have seen has been.

12-10-2008, 11:02 AM	#6
Bus Ted Knuckle Son of a gun Join Date: Jan 2007 Location: Hot Springs, Arkansas Posts: 1,636	Re: Looking for this heavy bumper? they are dealer added bumpers. Usually have dealers name stamped into it. THere was a thread a year ago or so about them, and it seems they were mostly a southern/south eastern thing. They are very common in my area. __________________ Bill BEATERS ARE NEATER

12-10-2008, 11:14 AM	#7
grayw0lf Registered User Join Date: Apr 2004 Location: Clanton, AL Posts: 1,253	Re: Looking for this heavy bumper? They're quite common here too. The ones areound here are usually bolted on, no welding. The brackets are cut from 1/2" steel plate. __________________ 85' CUCV M1009!!! The newest addition! 6.2diesel, Th400, NP208, & only 36k miles! 70' C-10 LWB Fleetside - Looking good these days! 05' Dodge Neon 88' Winner Escape Sport 1750 - 4.3v6 94' Seadoo SP 84' Honda TRX200, bare nekkid. Just a frame & tires. Always looking for another project or any good deal!

12-10-2008, 11:17 AM	#9
Stock72c10 classic=of recognized value Join Date: Sep 2008 Location: Wichita, KS Posts: 317	Re: Looking for this heavy bumper? Here is the one I have on my truck, I always thought it was OEM, but now I am not sure? Mine doesn't have any dealer name stamped on it. Unfortunately I need to keep mine until I can afford chrome for the front and rear bumpers. Attached Images

12-10-2008, 12:06 PM	#10
ChevLoRay Old Skool Club Join Date: Jun 2001 Location: Benton, AR "The Heart of Arkansas" Posts: 10,880	Re: Looking for this heavy bumper? You can have the one that is on my truck. Come and get it!! __________________ Member Nr. 2770 '96 GMC Sportside; 4.3/SLT - Daily driven....constantly needs washed. '69 C-10 SWB; 350/TH400 - in limbo The older I get, the better I was.

12-10-2008, 12:19 PM	#12
chevy_mike Never Ending Projects Join Date: Jul 2006 Location: San Diego, CA Posts: 3,836	Re: Looking for this heavy bumper? Here is the one I took off my '68. It looks to be original as the license plate light has a factory connector and it plugged into the factory wiring harness. It's in the for sale area. __________________ . 1965 C10 Panel, Tiki Express http://www.67-72chevytrucks.com/vboa...d.php?t=506580 SOLD 1968 Chevy C10, Long, Fleetside, Hot Rod Hauler http://67-72chevytrucks.com/vboard/s...d.php?t=313233 SOLD 1965 Chevy C10, Long, Fleetside, Hot Rod C10 http://67-72chevytrucks.com/vboard/s...d.php?t=415702 SOLD We were given two ears and one mouth for a reason... listen twice as much and speak half as often...

12-10-2008, 12:39 PM	#13
bigbadchev72 People know me Join Date: Jun 2007 Location: Hermiston, oregon Posts: 840	Re: Looking for this heavy bumper? Why not build one? here is mine __________________ 1972 k/5 blazer CST 4X4 Crate 350, th350/205, dana44with trac-loc/14 bolt with detroit locker, 4 wheel discs 4.56s, 8" suspension lift using 73-87springs, 1" zerorate custom front crossmember, HAD CV drivelines and driveshaft e-brake, full cage, PRP seats, Full autometer gauges, 38x14.5x16 Toyo M/Ts, 16x10 Polished aluminum rockcrusher wheels 1967 longbox 4x4, Strong 400/400/208, 44/12bolt 4.10s, 6" lift, 35" Toyo M/Ts on corvette rally wheels

12-10-2008, 12:45 PM	#14
Puropedo Account Suspended Join Date: Nov 2008 Location: Prunedale California Posts: 782	Re: Looking for this heavy bumper? I've got 2-3 of those sitting around my shop,, u are welcome to comeby and pick them up for free (maybe bring a six pack). Cant help u on the shipping, sorry

12-10-2008, 01:14 PM	#17
berencam Registered User Join Date: Aug 2007 Location: branson mo Posts: 933	Re: Looking for this heavy bumper? l had one like what your looking for, and you can have it.... just pay to get the truck out of the tow yard and its yours lol. Attached Images __________________ 69 chevy c10 350 3 speed manual wood bed build thread here r.i.p. 70 c10 auto 350 build here Last edited by berencam; 12-10-2008 at 01:15 PM.

12-10-2008, 01:21 PM	#18
fine69 Senior Member Join Date: Dec 1999 Location: Urbana,Ohio,USA Posts: 4,618	Re: Looking for this heavy bumper? Hey. I have one here in Ohio. Can get pics soon. Originally off a rustfree California truck. Pm me if interested. __________________ 2008 Chevy HHR 1/2 panel. 1949 Chevy Panel truck(just sittin, waiting) Board member #6

12-10-2008, 01:39 PM	#21
lax54650 Registered User Join Date: Aug 2008 Location: lacrosse wi. Posts: 426	Re: Looking for this heavy bumper? i have one just like chevy mikes you can have i am on wis. west coast.

12-10-2008, 02:47 PM	#25
CPNE Resident Curmudgeon Join Date: Dec 1999 Location: NH Posts: 6,662	Re: Looking for this heavy bumper? Thank you. Mines a bit different, perhaps because i was on a SWB 4x4 and the spring perches forced a different mount. I'll stop thread-jacking the OP's post now. __________________ Currently on or near the homestead: 67 Chevy SWB 2WD stepside 350/3 on tree (Pat's) 67 GMC SWB 2WD Fleet 402/auto (Brian's under construction) 67 Chevy 3/4 ton 2WD 402/auto (Business Hauler) 67 Chevy 1 ton dually 2WD 396/4 speed (Former business hauler, Needs TLC) 68 Chevy 1/2 ton Suburban 2WD 250 six/3 on tree (Brian's Needs TLC) 70 Chevy 3/4 ton 4WD 350/4 speed (Pat's - Disguised as a 68 GMC) 71 Chevy SWB stepside (Crushed by tree - parts donor) 72 Chevy 3/4 ton 4WD (Parts donor) 72 Chevy 3/4 ton 4WD Suburban (Parts Donor) 72 GMC 3/4 ton 4WD 292 six/4 speed (Mine - Disguised as a 67 GMC) 81 GMC 4WD Dually Dump Body 350/4 speed (Business Hauler) 82 Camaro Z/28 355/Super T-10 (Pat's toy) 93 Caprice 9C1 (Brian's Cop Car) 02 Toyota Camry (Reliable but a souless steel and plastic hulk) 2011 2SS RS Camaro M6 Factory Hurst Shifter Maybe I need to sell some of this crap Yet another Bozo with a sawz-all



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.