Help me measure front brake lines for 71'-72' - The 1947 - Present Chevrolet & GMC Truck Message Board Network

myoldchevytruck · 12-11-2008, 07:29 PM

Fellas, I have done a disk brake conversion on my 69' SWB Stepside. I am using 71'-72' parts and would like to know if any one has ever bent their own hard line.

I just picked up a 3/16" inverted flare tee from Napa. Does anyone know what the lengths of the hard line are for:

Tee to the Drivers Side Brake Hose
Tee to the Passenger Side Brake Hose
Tee to the Proportional Valve

I want to run my own hard line and Advanced Auto or Auto Zone sell specified lengths with the double flare and fitting already in place.

If unknown is there a reference that I can check online? Thank

12-11-2008, 07:29 PM	#1
myoldchevytruck Retired Air Force Veteran Join Date: Aug 2007 Location: Pembroke Pines, Florida 33024 Posts: 1,808	Help me measure front brake lines for 71'-72' Fellas, I have done a disk brake conversion on my 69' SWB Stepside. I am using 71'-72' parts and would like to know if any one has ever bent their own hard line. I just picked up a 3/16" inverted flare tee from Napa. Does anyone know what the lengths of the hard line are for: Tee to the Drivers Side Brake Hose Tee to the Passenger Side Brake Hose Tee to the Proportional Valve I want to run my own hard line and Advanced Auto or Auto Zone sell specified lengths with the double flare and fitting already in place. If unknown is there a reference that I can check online? Thank __________________ Harry 69' SWB Step Side 1/2 Ton w/68' Front Clip Swap from Leafs to Trailing Arms (Complete) Swap 6 Lug to 5 Lug (w/ Disk Brakes in Front) 3/6 Drop Help Support The Board Click Here For Information On How To Subscribe Krue's FAQ Page Vendors



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.