SWB vs. LWB - The 1947 - Present Chevrolet & GMC Truck Message Board Network

smithjp1 · 12-03-2002, 04:58 PM

What is the length of the SWB vs. the LWB?

What is a c10 8' bed - is this a lwb or swb?

Thanks.

*Shane* · 12-03-2002, 05:19 PM

SWB & LWB refer to the wheel base.

115 inches = SWB = Short Wheel Base (OAL -bumper to bumper = 188 1/2")
127 inches = LWB = Long Wheel Base (OAL - bumper to bumper = 207 3/4")
(wheel base is measured from centerline of front wheel to centerline of rear wheel)

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

If you are reffering to the length of the BED

Shortbed Stepside = 78 1/4 inches long X 50 inches wide
Longbed Stepside = 98 inches long X 50 inches wide

Shortbed Fleetside = 78 1/4 inches long X 66 inches wide (width measured at inside of top lip)
Longbed Fleetside = 98 inches long X 66 inches wide (width measured at inside of top lip)

The 8 foot bed would be a longbed...

hope this helps...

Crank · 12-04-2002, 04:59 PM

Also, you've got a *Longhorn* it is longer than a long bed, it has an additional 6" to the front of the bed and 6" added to the frame in that place. Which would make it a total of 133". Is that one right Longhornmail???
Brandon

crazy longhorn · 12-04-2002, 05:07 PM

That right on Brabra......the other longhorn

Longhorn Man · 12-05-2002, 01:18 AM

Yep...and of course there is the one ton step side...with a 9 foot bed.

12-03-2002, 04:58 PM	#1
smithjp1 Registered User Join Date: Dec 2002 Location: Katy, Texas Posts: 116	SWB vs. LWB What is the length of the SWB vs. the LWB? What is a c10 8' bed - is this a lwb or swb? Thanks.

12-03-2002, 05:19 PM	#2
Shane Account Suspended Join Date: Jun 2000 Location: over yonder Posts: 14,270	SWB & LWB refer to the wheel base. 115 inches = SWB = Short Wheel Base (OAL -bumper to bumper = 188 1/2") 127 inches = LWB = Long Wheel Base (OAL - bumper to bumper = 207 3/4") (wheel base is measured from centerline of front wheel to centerline of rear wheel) ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ If you are reffering to the length of the BED Shortbed Stepside = 78 1/4 inches long X 50 inches wide Longbed Stepside = 98 inches long X 50 inches wide Shortbed Fleetside = 78 1/4 inches long X 66 inches wide (width measured at inside of top lip) Longbed Fleetside = 98 inches long X 66 inches wide (width measured at inside of top lip) The 8 foot bed would be a longbed... hope this helps... Last edited by Shane; 12-03-2002 at 05:28 PM.

12-04-2002, 05:07 PM	#4
crazy longhorn Fabricate till you "puke" Join Date: Jun 2002 Location: Ill Posts: 9,402	That right on Brabra......the other longhorn __________________ 69 longhorn,4" chop,3/5 drop, 1/2 ton suspension/disc brakes,1 1/2" body drop,steel tilt clip, 5.3/Edelbrock rpm intake/600 carb, Hooker streetrod shorties,2 1/2" exhaust/ H pipe/50's Flows , 6 spd Richmond trans,12 bolt/ 3.40 gears....

12-04-2002, 04:59 PM	#3
Crank Registered User Join Date: Aug 2002 Location: Crittenden, KY Posts: 1,965	Also, you've got a Longhorn it is longer than a long bed, it has an additional 6" to the front of the bed and 6" added to the frame in that place. Which would make it a total of 133". Is that one right Longhornmail??? Brandon

12-05-2002, 01:18 AM	#5
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	Yep...and of course there is the one ton step side...with a 9 foot bed.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.