WTB - 72 4wd engine crossmember - The 1947 - Present Chevrolet & GMC Truck Message Board Network

themikehyde · 12-28-2008, 12:18 PM

Hello everyone, I am redoing another 72 K10. Hopefully this will be my last becasue I have told all my friends not to let me get stupid and sell this one. I have a 72 K10, that was modified for a BB, but I want to go back to a 350. Does anyone have the engine crossmember for sale?

Thanks,
Mike

**PICKMUP** · 12-28-2008, 01:05 PM

I can send you a good one for $50 shipped...

themikehyde · 12-28-2008, 06:37 PM

Pickmup,
Can you send me a pic? Also, I am missing the crossmember that is rear of the rear axle, but in front of the spare tire crossmember. Do you have that also?

Thanks,
Mike

**t korinek** · 12-29-2008, 01:43 AM

If PICKMUP doesn't I do have (the rear crossmember). & any other 4x4 frame brackets & hangers.
Tom

themikehyde · 12-29-2008, 11:38 AM

Hi guys,
I have not found a good pic of a 4wd frame to know exactly what I am missing, so any help woul dbe appreciated. I have removed ttranny crossmember. I took it out to sandblast. I am wanting to get all the crossmembers verified, and trial fit my drivetrain before I send the frame out for powdercoating.

**t korinek** · 12-29-2008, 12:06 PM

Here is a 4x4 frame with all but the trans crossmember.
Tom

themikehyde · 12-29-2008, 12:12 PM

Ok, Thanks. I thought there were 2 crossmembers, plus the spare tire carrier behind the rear axle.

Thanks,
Mike

**PICKMUP** · 12-29-2008, 04:53 PM

Here's the engine crossmember in excellent cond. No dents, no bends, only surface rust (no pitting).

themikehyde · 12-30-2008, 10:17 AM

Pickmup, Great, I'll take it. Do you have paypal?

Thanks,
Mike

**PICKMUP** · 12-30-2008, 05:03 PM

PM sent.........................

CTENTA1 · 01-04-2009, 11:03 PM

Quote:

Originally Posted by PICKMUP

Here's the engine crossmember in excellent cond. No dents, no bends, only surface rust (no pitting).

Just a question. I'll be putting a big block in my 71 4x Blazer in the future.I have that exact crossmember, can i use that? It is still not clear to me after reding up on all the Engine swap posts.
thanks!

**BAD4X4** · 01-04-2009, 11:37 PM

CTENTA1 You can use the stock cross member. It's the size of the pan is where you might have to cut the center section out and drop it down. Hope this helps.

CTENTA1 · 01-05-2009, 12:05 AM

BAD4X4

Sure does, ill keep that in mind when it comes down to it.

Thank you.

12-28-2008, 12:18 PM	#1
themikehyde Registered User Join Date: Dec 2008 Location: Colonial Beach VA Posts: 28	WTB - 72 4wd engine crossmember Hello everyone, I am redoing another 72 K10. Hopefully this will be my last becasue I have told all my friends not to let me get stupid and sell this one. I have a 72 K10, that was modified for a BB, but I want to go back to a 350. Does anyone have the engine crossmember for sale? Thanks, Mike

12-28-2008, 01:05 PM	#2
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,158	Re: WTB - 72 4wd engine crossmember I can send you a good one for $50 shipped...

12-28-2008, 06:37 PM	#3
themikehyde Registered User Join Date: Dec 2008 Location: Colonial Beach VA Posts: 28	Re: WTB - 72 4wd engine crossmember Pickmup, Can you send me a pic? Also, I am missing the crossmember that is rear of the rear axle, but in front of the spare tire crossmember. Do you have that also? Thanks, Mike

12-29-2008, 01:43 AM	#4
t korinek Truckin' Krazy Join Date: May 2000 Location: mesa az Posts: 6,193	Re: WTB - 72 4wd engine crossmember If PICKMUP doesn't I do have (the rear crossmember). & any other 4x4 frame brackets & hangers. Tom __________________ Dealer for: American Auto Wire Precision weatherstripping Dakota Digital Trim parts Carpets Truck World seat covers & Many others Chevy Parts locator in Mesa AZ!

12-29-2008, 11:38 AM	#5
themikehyde Registered User Join Date: Dec 2008 Location: Colonial Beach VA Posts: 28	Re: WTB - 72 4wd engine crossmember Hi guys, I have not found a good pic of a 4wd frame to know exactly what I am missing, so any help woul dbe appreciated. I have removed ttranny crossmember. I took it out to sandblast. I am wanting to get all the crossmembers verified, and trial fit my drivetrain before I send the frame out for powdercoating. Attached Images

12-29-2008, 12:06 PM	#6
t korinek Truckin' Krazy Join Date: May 2000 Location: mesa az Posts: 6,193	Re: WTB - 72 4wd engine crossmember Here is a 4x4 frame with all but the trans crossmember. Tom Attached Images __________________ Dealer for: American Auto Wire Precision weatherstripping Dakota Digital Trim parts Carpets Truck World seat covers & Many others Chevy Parts locator in Mesa AZ!

12-29-2008, 12:12 PM	#7
themikehyde Registered User Join Date: Dec 2008 Location: Colonial Beach VA Posts: 28	Re: WTB - 72 4wd engine crossmember Ok, Thanks. I thought there were 2 crossmembers, plus the spare tire carrier behind the rear axle. Thanks, Mike

12-29-2008, 04:53 PM	#8
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,158	Re: WTB - 72 4wd engine crossmember Here's the engine crossmember in excellent cond. No dents, no bends, only surface rust (no pitting). Attached Images

12-30-2008, 10:17 AM	#9
themikehyde Registered User Join Date: Dec 2008 Location: Colonial Beach VA Posts: 28	Re: WTB - 72 4wd engine crossmember Pickmup, Great, I'll take it. Do you have paypal? Thanks, Mike

12-30-2008, 05:03 PM	#10
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,158	Re: WTB - 72 4wd engine crossmember PM sent......................... Last edited by PICKMUP; 12-30-2008 at 05:04 PM.

01-04-2009, 11:37 PM	#12
BAD4X4 Senior Member Join Date: Jan 2003 Location: La pine Oregon Posts: 1,668	Re: WTB - 72 4wd engine crossmember CTENTA1 You can use the stock cross member. It's the size of the pan is where you might have to cut the center section out and drop it down. Hope this helps. __________________ 1972 Cheyenne K-30 6"lift {502 PROJECT} 1972 Cheyenne K-30 8"lift 454 450hp {Ol'Blue} 1972 Cheyenne K-20 Custom Stretch 6" lift 454 1972 Custom Deluxe K-20 4" lift 2007 GMC Crew Cab Diesel 6"lift {The Tow Rig 2017 Ford F-350 Crew Cab 6.7 6"lift (Wife's) 1977 El Camino SS Grandpa baught new 1986 K-30 Crew Cab 502 1955 Chevy 2-Door gasser 454 550hp{project} 1956 Chevy Bel-Air 2-Door hardtop 572 700hp 1979 Ford F-350 All Original 4x4 (Wife's)

01-05-2009, 12:05 AM	#13
CTENTA1 Registered 1971 K5 Join Date: Dec 2008 Location: SO.CEN.CAL Posts: 428	Re: WTB - 72 4wd engine crossmember BAD4X4 Sure does, ill keep that in mind when it comes down to it. Thank you.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.