'67 Panel - The 1947 - Present Chevrolet & GMC Truck Message Board Network

67CHIP72 · 01-05-2009, 11:46 PM

Anyone know what the production numbers were for the Panel Vans? Found this on for $800 on CL, but it's just a shell.

http://orangecounty.craigslist.org/cto/976839721.html

Longhorn Man · 01-06-2009, 12:02 AM

that was on e-bay just a couple weeks ago listed with a $900 bin.
they built 3827 C/10 panels in 67

**leddzepp** · 01-06-2009, 12:07 AM

He is right down the street from me, I might have to go take a look at it.

Longhorn Man · 01-06-2009, 12:29 AM

I suspect he doesn't have much of a clue. In the auction he said it was an A/C truck since there is a condensor under the hood. Being there's no vents in the dash, and the front clip doesn't match the truck... it isn't hard to figure out.

Richard8971 · 01-06-2009, 12:52 AM

Man, I wouldn't care if it was a shell or not. I want one really bad.

Someday...

Don

72armyswbtruck · 01-06-2009, 03:33 AM

Listing has been deleted by user already, that was quick

**special-K** · 01-06-2009, 06:57 AM

A shell is all you need.Everything else is easy.Prolly sold that quick.

67CHIP72 · 01-07-2009, 01:15 AM

Quote:

Originally Posted by Richard8971

Man, I wouldn't care if it was a shell or not. I want one really bad.

Someday...

Don

I know, I'd love to have one too. Someday when the finances and space allow...

PS. Thanks Longhorn Man for the #'s

Gray Ghost · 01-07-2009, 02:30 AM

Must not have sold....it's back on for $700

http://dallas.craigslist.org/dal/cto/983341680.html

**LockDoc** · 01-07-2009, 10:58 AM

-
If I was close enough that thing would already be in my shop..

LockDoc

**leddzepp** · 01-07-2009, 11:20 AM

Im going to see it later today....will keep you posted

**70cst** · 01-07-2009, 11:34 AM

If I remember right there is also a 67-68 panel between Shelbyville and Bardstown Ky. I remember seeing it sitting in a driveway. It wasn't for sale but you just don't seee that many panels.

kcjones · 01-07-2009, 11:52 AM

I'm with Richard and Gray Ghost..fast forward a couple years, and I'd be in my buddy's 1 ton hauler drivin' to pick that shell up! SpecialK's right: all you need is a body and frame, the rest is easy.

01-05-2009, 11:46 PM	#1
67CHIP72 STOLEN Join Date: Jun 2006 Location: Orange County Posts: 1,022	'67 Panel Anyone know what the production numbers were for the Panel Vans? Found this on for $800 on CL, but it's just a shell. http://orangecounty.craigslist.org/cto/976839721.html Attached Images __________________ In Search Of

01-06-2009, 12:02 AM	#2
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	Re: '67 Panel that was on e-bay just a couple weeks ago listed with a $900 bin. they built 3827 C/10 panels in 67

01-06-2009, 12:07 AM	#3
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 20,031	Re: '67 Panel He is right down the street from me, I might have to go take a look at it.

01-06-2009, 12:29 AM	#4
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	Re: '67 Panel I suspect he doesn't have much of a clue. In the auction he said it was an A/C truck since there is a condensor under the hood. Being there's no vents in the dash, and the front clip doesn't match the truck... it isn't hard to figure out.

01-06-2009, 12:52 AM	#5
Richard8971 Still livin the "dream" in '54 Join Date: Nov 2006 Location: Tucson, AZ Posts: 2,656	Re: '67 Panel Man, I wouldn't care if it was a shell or not. I want one really bad. Someday... Don __________________ Current build. 1954 Chevrolet 3800 "Ella" SOLD! My '67 stepper "Tangerine Dream" "Anything worth doing is worth doing right" James Dean “When you have eliminated all which is impossible, then whatever remains, however improbable, must be the truth.” Sherlock Holmes "There is no spoon." Neo

01-06-2009, 03:33 AM	#6
72armyswbtruck Registered User Join Date: Feb 2004 Location: Idaho Posts: 4,033	Re: '67 Panel Listing has been deleted by user already, that was quick __________________ "Remember, They can Kill You, but they can't eat You, That's against the law!!!!!!!!!"

01-06-2009, 06:57 AM	#7
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: '67 Panel A shell is all you need.Everything else is easy.Prolly sold that quick. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

01-07-2009, 02:30 AM	#9
Gray Ghost Senior Member Join Date: Sep 2004 Location: Terrell, TX Posts: 1,967	Re: '67 Panel Must not have sold....it's back on for $700 http://dallas.craigslist.org/dal/cto/983341680.html __________________ Kelly '05 GMC Sierra SLE Z71 Bone stock except for new bed rail caps.

01-07-2009, 10:58 AM	#10
LockDoc The Older Generation Join Date: Aug 2006 Location: Montezuma, Iowa Posts: 25,771	Re: '67 Panel - If I was close enough that thing would already be in my shop.. LockDoc __________________ Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 -

01-07-2009, 11:20 AM	#11
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 20,031	Re: '67 Panel Im going to see it later today....will keep you posted

01-07-2009, 11:34 AM	#12
70cst Senior Member Join Date: Feb 2001 Location: New Madison, Ohio Posts: 21,373	Re: '67 Panel If I remember right there is also a 67-68 panel between Shelbyville and Bardstown Ky. I remember seeing it sitting in a driveway. It wasn't for sale but you just don't seee that many panels. __________________ A husband can be right...or...A husband can be happy. 67-72 Chevy and GMC Trucks...The Classic Truck for the Classic Folk. 1970 CST Two tone green, 402BB, 400 Automatic, Tach, Buckets, AC, AM-FM, Tilt, GM CB, GM 8 Tract, LWB, etc JOHN 17:3...The better side of "LIFE" Remember: Everyday is a good day...Some are just gooder!

01-07-2009, 11:52 AM	#13
kcjones I wish I was a cowboy Join Date: Apr 2008 Location: Rohnert Park, CA Posts: 409	Re: '67 Panel I'm with Richard and Gray Ghost..fast forward a couple years, and I'd be in my buddy's 1 ton hauler drivin' to pick that shell up! SpecialK's right: all you need is a body and frame, the rest is easy. __________________ -Kris Met list: Cyclone,Wilson,TranzAm,extd56,hotrodhomi,mnky30,Rokcrln,Brad,JerryJones(well, his truck anyway).



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.