Aluminum radio mounting plate - The 1947 - Present Chevrolet & GMC Truck Message Board Network

mekdad · 01-08-2009, 07:36 PM

$50.00 Shipped to your door with mounting studs and drilling template.
I will also be making one to mount a factory style radio.I will post pics when it is done.

As with all of my parts this IS right out of the machine.You do the finishing.

This one has room for some custom engraving around the out side for those interested.

jb4short · 01-08-2009, 07:51 PM

what sizes will that accept? I think I want one.

Redden05 · 01-08-2009, 07:55 PM

I am interested too. I would like to know the measurements for the radio hole also.

**jaros44sr** · 01-08-2009, 08:05 PM

Could I get one without the radio cutout, just got a new radio and the cutout is much smaller than factory

mekdad · 01-08-2009, 08:08 PM

Let me know If you need more than this.It is a standard 1 din I do believe.

**jaros44sr** · 01-08-2009, 08:34 PM

My face unit measures roughly, width 3.541 in. x height 1.506 in....doable?

Hard On Parts · 01-08-2009, 08:37 PM

I will take it, pm me your address for money order please.

**70cst** · 01-08-2009, 08:44 PM

mekdad...very nice looking mounting plate. A job well done!

70GMCer · 01-09-2009, 08:34 AM

CNC is a wonderful thing......

mekdad · 01-09-2009, 02:25 PM

Quote:

Originally Posted by jaros44sr

My face unit measures roughly, width 3.541 in. x height 1.506 in....doable?

Yes, What model is it and I can go see if I can find one to see how everything mounts up?

Quote:

Originally Posted by Hard On Parts

I will take it, pm me your address for money order please.

PM sent.

Quote:

Originally Posted by 70cst

mekdad...very nice looking mounting plate. A job well done!

Thank you.Is your dash cut up?

Quote:

Originally Posted by 70GMCer

CNC is a wonderful thing......

Yes,yes it is.Got a request?

**jaros44sr** · 01-09-2009, 02:48 PM

Quote:

Originally Posted by mekdad

Yes, What model is it and I can go see if I can find one to see how everything mounts up?

RetroSound Model One w/Infinimount, allows the shafts to be mounted in any location...vertical and horizontal

mekdad · 01-09-2009, 03:01 PM

Quote:

Originally Posted by jaros44sr

RetroSound Model One w/Infinimount, allows the shafts to be mounted in any location...vertical and horizontal

That is the one that fits the factory hole right?If it is then yes I will be making this to fit the factory radio,so it should fit that one.

**jaros44sr** · 01-09-2009, 03:07 PM

Quote:

Originally Posted by mekdad

That is the one that fits the factory hole right?If it is then yes I will be making this to fit the factory radio,so it should fit that one.

No, this is much smaller than the stock rectangle. It has a cover plate to cover up the factory opening, but it is plastic and looks like crap. I can cut the opening myself if you want

mekdad · 01-09-2009, 03:38 PM

So it looks like this?

LUV2XCLR8 · 01-09-2009, 04:36 PM

Very nice

**jaros44sr** · 01-09-2009, 10:23 PM

Quote:

Originally Posted by mekdad

So it looks like this?

Yes, exactly! I want to get rid of the plastic surround

NWD02 · 01-10-2009, 12:01 AM

If you make one for uncut dashes keep me in mind. It looks GREAT and a big bump for good pricing!

mekdad · 01-12-2009, 10:10 AM

Quote:

Originally Posted by jaros44sr

Yes, exactly! I want to get rid of the plastic surround

That can be done.

**jaros44sr** · 01-12-2009, 10:20 AM

Quote:

Originally Posted by mekdad

That can be done.

Cool, can you make it with squared edges in the cut out, instead of using an endmill. Just so it fits the face of the radio better

ftgauto · 01-12-2009, 10:22 PM

how do i get a couple of those???? ftgauto@hotmail.com

mekdad · 01-13-2009, 09:56 AM

Quote:

Originally Posted by ftgauto

how do i get a couple of those???? ftgauto@hotmail.com

PayPal,Money Order,check.

70onB.A.D.'s · 01-13-2009, 10:22 AM

mekdad. Could you please pm me or however you want to. I need your paypal info so I can get two of these mounting plates off of you.

mekdad · 01-13-2009, 10:47 AM

PM your e-mail and I can bill you threw paypal or send check or money order.

If you want to pay check or money order you can send them to.
Wayment Mfg.
417 Main St. P.O.773
Filer,Id 83328

Or call 208-326-3566

70onB.A.D.'s · 01-13-2009, 03:46 PM

Just let you know FTGAUTO is my boss so i bought them for both of us. Thanks

mekdad · 01-13-2009, 03:49 PM

I was wondering about something like that.Your parts will ship in the morning.
Thank you,
Ken

01-08-2009, 07:36 PM	#1
mekdad Registered User Join Date: May 2008 Location: Filer, Idaho Posts: 416	Aluminum radio mounting plate $50.00 Shipped to your door with mounting studs and drilling template. I will also be making one to mount a factory style radio.I will post pics when it is done. As with all of my parts this IS right out of the machine.You do the finishing. This one has room for some custom engraving around the out side for those interested. Attached Images __________________ you never know what you can do until you have to undo something you have done! Last edited by mekdad; 01-09-2009 at 10:07 AM.

01-08-2009, 07:51 PM	#2
jb4short Damn Yankee Join Date: Feb 2007 Location: Lynchburg, VA Posts: 2,261	Re: Aluminum radio mounting plate what sizes will that accept? I think I want one.

01-08-2009, 07:55 PM	#3
Redden05 Registered User Join Date: Jan 2007 Location: Watsontown PA 17777 Posts: 1,196	Re: Aluminum radio mounting plate I am interested too. I would like to know the measurements for the radio hole also.

01-08-2009, 08:05 PM	#4
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,766	Re: Aluminum radio mounting plate Could I get one without the radio cutout, just got a new radio and the cutout is much smaller than factory __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim

01-08-2009, 08:08 PM	#5
mekdad Registered User Join Date: May 2008 Location: Filer, Idaho Posts: 416	Re: Aluminum radio mounting plate Let me know If you need more than this.It is a standard 1 din I do believe. Attached Images __________________ you never know what you can do until you have to undo something you have done! Last edited by mekdad; 01-08-2009 at 08:09 PM.

01-08-2009, 08:34 PM	#6
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,766	Re: Aluminum radio mounting plate My face unit measures roughly, width 3.541 in. x height 1.506 in....doable? __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim Last edited by jaros44sr; 01-08-2009 at 08:35 PM.

01-08-2009, 08:37 PM	#7
Hard On Parts Registered User Join Date: Dec 2008 Location: Cedar Vale, KS Posts: 145	Re: Aluminum radio mounting plate I will take it, pm me your address for money order please.

01-08-2009, 08:44 PM	#8
70cst Senior Member Join Date: Feb 2001 Location: New Madison, Ohio Posts: 21,373	Re: Aluminum radio mounting plate mekdad...very nice looking mounting plate. A job well done! __________________ A husband can be right...or...A husband can be happy. 67-72 Chevy and GMC Trucks...The Classic Truck for the Classic Folk. 1970 CST Two tone green, 402BB, 400 Automatic, Tach, Buckets, AC, AM-FM, Tilt, GM CB, GM 8 Tract, LWB, etc JOHN 17:3...The better side of "LIFE" Remember: Everyday is a good day...Some are just gooder!

01-09-2009, 08:34 AM	#9
70GMCer Senior Member Join Date: Apr 2005 Location: Joppa, Maryland Posts: 4,408	Re: Aluminum radio mounting plate CNC is a wonderful thing...... __________________ 1997 GMC Sierra Ext 1965 Mustang

01-09-2009, 03:38 PM	#14
mekdad Registered User Join Date: May 2008 Location: Filer, Idaho Posts: 416	Re: Aluminum radio mounting plate So it looks like this? Attached Images __________________ you never know what you can do until you have to undo something you have done!

01-09-2009, 04:36 PM	#15
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,468	Re: Aluminum radio mounting plate Very nice __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

01-10-2009, 12:01 AM	#17
NWD02 Registered User Join Date: Oct 2007 Location: Mont Belvieu, Texas Posts: 729	Re: Aluminum radio mounting plate If you make one for uncut dashes keep me in mind. It looks GREAT and a big bump for good pricing!

01-12-2009, 10:22 PM	#20
ftgauto Registered User Join Date: Nov 2008 Location: Ft. Gibson OK Posts: 86	Re: Aluminum radio mounting plate how do i get a couple of those???? ftgauto@hotmail.com

01-13-2009, 10:22 AM	#22
70onB.A.D.'s Registered User Join Date: Nov 2008 Location: Fort Gibson, Ok Posts: 84	Re: Aluminum radio mounting plate mekdad. Could you please pm me or however you want to. I need your paypal info so I can get two of these mounting plates off of you.

01-13-2009, 10:47 AM	#23
mekdad Registered User Join Date: May 2008 Location: Filer, Idaho Posts: 416	Re: Aluminum radio mounting plate PM your e-mail and I can bill you threw paypal or send check or money order. If you want to pay check or money order you can send them to. Wayment Mfg. 417 Main St. P.O.773 Filer,Id 83328 Or call 208-326-3566 __________________ you never know what you can do until you have to undo something you have done! Last edited by mekdad; 01-13-2009 at 10:48 AM.



Register or Log In To remove these advertisements.

01-13-2009, 03:46 PM	#24
70onB.A.D.'s Registered User Join Date: Nov 2008 Location: Fort Gibson, Ok Posts: 84	Re: Aluminum radio mounting plate Just let you know FTGAUTO is my boss so i bought them for both of us. Thanks

01-13-2009, 03:49 PM	#25
mekdad Registered User Join Date: May 2008 Location: Filer, Idaho Posts: 416	Re: Aluminum radio mounting plate I was wondering about something like that.Your parts will ship in the morning. Thank you, Ken __________________ you never know what you can do until you have to undo something you have done!

Register or Log In To remove these advertisements.