restoration on my truck? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

72'BBGMCSGCC · 12-07-2002, 07:29 PM

I was wondering if I should do a ground up resoration or leave the cab on the truck? Should I paint the firewall, it has the origional chalk markings on it? Should I have him take out the old calking around the drip rail or leave the origional calking alone? Should I paint the truck the same color or use the same color with metalic in it? I want to keep the value in my truck, but I want to do the job right. Thanks for everyones advice.

*Randy70C-10* · 12-07-2002, 08:07 PM

All of those questions depend on what you want, and what you're capable of doing (or can afford).

Longhorn Man · 12-07-2002, 08:15 PM

If you have the means/time/cash/ect...by all means yank the cab off. It is not much more work (or man hrs if you are farming it out) to do once everything else is off) and it wil give you a chance to inspect/repair/detail the frame properly.
As far as paint... go with what ever you want on it. Very few people care if it is 100% original or replicated to original, and normally it is only on the more rare trucks.
I would say however, that sticking with stock colors and schems ...or at least keeping it close, would probably net you more cash if/when you go to sell it. One shade off of the original is a whole lot better than the "I can't make up my mind" paint that ford has used on a car or two. (just an example)
As for the numbers on the firewall...this is debatable. If/when I am ever at that stage...I think I would replicate the numbers, and shoot clear over it. (I prefer base/clear...even though it was not original)
Either way around it, you need to figure who you are building this rig for. If it is for you...then do it to please yourself. Gather ideas and pick your favorite...or find what you think to be the 'ultimate' '72, and coppy it.
If you are building it just to sell...then the only thing to remember is you can not please all of the ppl all of the time.
That's my outlook on it...but what do i know...I'm cross breeding a luxo barge engine wioth a heavy duty (built in limited numbers) work truck and hoping for something fast.

*Shane* · 12-07-2002, 08:50 PM

The one thing that is gonna bring you the most money when you decide to sell the truck is "Quality of the Work" that has been done ... i doubt the chalk marks on the firewall will bring more money if the rest of the truck isn't done with some degree of quality.

Decide what you are gonna do with the truck and then spend what you can afford. I know I would rather pay more money for an unpainted truck with nice mechanical qualities ... as opposed to paying more for a truck with shiney paint and shoddy mechanicals ....

72'BBGMCSGCC · 12-07-2002, 11:11 PM

I'm keeping the truck myself,and want to keep it origional.but if I ever have to sell it I want to get top dollar.Should I have him replace the calking around the drip rail. It's in good shape,but he says he always replaces it when he does a restoration.He told me the cost would be 5-$6,000 for all of the work and I've seen two of his jobs and they looked great.He said he would have to do the work around his other jobs and said it would take a while.He said 2 coats of paint and 6 coats of clearcoat.Some people have told me to leave the chalk markings and some not . and some have told me to leave the origional color and some not and some have told me to leave the cab on and some not,but I just want to do the right thing to keep the value in it,and to restore it the right way.Thank you for more suggestions.

junkyardjohn · 12-08-2002, 12:22 AM

BACK IN THE EARLY 60s AN UNCLE OF MINE WOULD BUY A NEW CHEVY WAGON EVERY TWO YEARS, & HE WOULD HAVE THESE HEAVY PLASTIC SEAT COVERS PUT ON OVER HIS BRAND NEW APHOLSTERY. BEING A CURIOS 6 OR 7 YEAR OLD , I ASKED HIM WHY HE DID THIS. HE EXPLAINED THAT AFTER 2 YEARS, JUST BEFORE TRADING IT IN, HE WOULD REMOVE THE COVERS AND HAVE BRAND NEW LOOKING SEATS FOR THE SECOND OWNER, THEREBY GETTING TOP DOLLAR FOR HIS TRADE IN. IT NEVER MADE SENSE TO ME, & I WAS JUST A LITTLE KID. LIFES TOO SHORT TO WORRY ABOUT THE NEXT OWNER.

Figment412 · 12-08-2002, 02:28 AM

I think that you should have him replace the caulking, when I pulled mine out I noticed some rust under there that coulod have developed a problem in the future. Plus you might as well do it now and get it done instead of having to do it after she is painted.

bigvinnie · 12-08-2002, 03:32 AM

if you wanna keep it original as you say, you can do a good restoration with the cab on.... take pix of the chalk markings so you can duplicate them... original means painting it the same color.., is this a rare high-option truck or what?

72'BBGMCSGCC · 12-08-2002, 02:11 PM

Hi BigVinnie, It's a 72' GMC Sierra Grande Custom Camper with 66,000 origional miles,3/4 with 402 BB, Turbo 400 AT,factory A/C,Dual Tanks,Etc.

72'BBGMCSGCC · 12-08-2002, 02:13 PM

I forgot to say , I was born in Escondido

12-07-2002, 07:29 PM	#1
72'BBGMCSGCC Registered User Join Date: Nov 2001 Location: Fletcher,N.C U.S.A Posts: 162	restoration on my truck? I was wondering if I should do a ground up resoration or leave the cab on the truck? Should I paint the firewall, it has the origional chalk markings on it? Should I have him take out the old calking around the drip rail or leave the origional calking alone? Should I paint the truck the same color or use the same color with metalic in it? I want to keep the value in my truck, but I want to do the job right. Thanks for everyones advice.

12-08-2002, 12:22 AM	#6
junkyardjohn Registered User Join Date: Aug 2001 Location: SOMERSET KY. Posts: 6,425	BACK IN THE EARLY 60s AN UNCLE OF MINE WOULD BUY A NEW CHEVY WAGON EVERY TWO YEARS, & HE WOULD HAVE THESE HEAVY PLASTIC SEAT COVERS PUT ON OVER HIS BRAND NEW APHOLSTERY. BEING A CURIOS 6 OR 7 YEAR OLD , I ASKED HIM WHY HE DID THIS. HE EXPLAINED THAT AFTER 2 YEARS, JUST BEFORE TRADING IT IN, HE WOULD REMOVE THE COVERS AND HAVE BRAND NEW LOOKING SEATS FOR THE SECOND OWNER, THEREBY GETTING TOP DOLLAR FOR HIS TRADE IN. IT NEVER MADE SENSE TO ME, & I WAS JUST A LITTLE KID. LIFES TOO SHORT TO WORRY ABOUT THE NEXT OWNER. __________________ junkyardjohn 69 1 TON TOW TRUCK // 84 4WD CUCV BLAZER// 85 1 TON 4WD STAKE TRUCK// 86 M1031 5/4 TON 4WD CUCV// ALOT OF OLD TRUCKS FOR ONE OLD MAN TO DRIVE. THERES ROOM FOR ALL OF GODS CREATURES RIGHT NEXT TO MY MASHED POTATOES// LIFE MEMBER OF P.E.T.A (PEOPLE EATING TASTY ANIMALS) DON'T RENT U-HAUL ALWAYS TELL THE TRUTH IT WILL AMAZE PART OF THE PEOPLE & ASTONISH THE REST

12-08-2002, 02:28 AM	#7
Figment412 Registered User Join Date: Dec 2002 Location: Fort Wayne, IN Posts: 108	I think that you should have him replace the caulking, when I pulled mine out I noticed some rust under there that coulod have developed a problem in the future. Plus you might as well do it now and get it done instead of having to do it after she is painted. __________________ Save your money and do it right the first time. 1968 GMC short bed 1972 Cab 74 SB Chevy running gear

12-08-2002, 03:32 AM	#8
bigvinnie Registered User Join Date: Aug 2001 Location: escondido, ca 92026 Posts: 1,222	if you wanna keep it original as you say, you can do a good restoration with the cab on.... take pix of the chalk markings so you can duplicate them... original means painting it the same color.., is this a rare high-option truck or what? __________________ '72 short step, 350, 700R4, tilt, ps, pdb, a/c, lowered coils, etc., other work in progress... San Diego, CA 72 Stepside Project

12-07-2002, 08:07 PM	#2
Randy70C-10 Account Suspended Join Date: Mar 2001 Location: Virginia Beach, Va. U.S.A. Posts: 15,320	All of those questions depend on what you want, and what you're capable of doing (or can afford).

12-07-2002, 08:15 PM	#3
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	If you have the means/time/cash/ect...by all means yank the cab off. It is not much more work (or man hrs if you are farming it out) to do once everything else is off) and it wil give you a chance to inspect/repair/detail the frame properly. As far as paint... go with what ever you want on it. Very few people care if it is 100% original or replicated to original, and normally it is only on the more rare trucks. I would say however, that sticking with stock colors and schems ...or at least keeping it close, would probably net you more cash if/when you go to sell it. One shade off of the original is a whole lot better than the "I can't make up my mind" paint that ford has used on a car or two. (just an example) As for the numbers on the firewall...this is debatable. If/when I am ever at that stage...I think I would replicate the numbers, and shoot clear over it. (I prefer base/clear...even though it was not original) Either way around it, you need to figure who you are building this rig for. If it is for you...then do it to please yourself. Gather ideas and pick your favorite...or find what you think to be the 'ultimate' '72, and coppy it. If you are building it just to sell...then the only thing to remember is you can not please all of the ppl all of the time. That's my outlook on it...but what do i know...I'm cross breeding a luxo barge engine wioth a heavy duty (built in limited numbers) work truck and hoping for something fast.

12-07-2002, 08:50 PM	#4
Shane Account Suspended Join Date: Jun 2000 Location: over yonder Posts: 14,270	The one thing that is gonna bring you the most money when you decide to sell the truck is "Quality of the Work" that has been done ... i doubt the chalk marks on the firewall will bring more money if the rest of the truck isn't done with some degree of quality. Decide what you are gonna do with the truck and then spend what you can afford. I know I would rather pay more money for an unpainted truck with nice mechanical qualities ... as opposed to paying more for a truck with shiney paint and shoddy mechanicals ....

12-07-2002, 11:11 PM	#5
72'BBGMCSGCC Registered User Join Date: Nov 2001 Location: Fletcher,N.C U.S.A Posts: 162	I'm keeping the truck myself,and want to keep it origional.but if I ever have to sell it I want to get top dollar.Should I have him replace the calking around the drip rail. It's in good shape,but he says he always replaces it when he does a restoration.He told me the cost would be 5-$6,000 for all of the work and I've seen two of his jobs and they looked great.He said he would have to do the work around his other jobs and said it would take a while.He said 2 coats of paint and 6 coats of clearcoat.Some people have told me to leave the chalk markings and some not . and some have told me to leave the origional color and some not and some have told me to leave the cab on and some not,but I just want to do the right thing to keep the value in it,and to restore it the right way.Thank you for more suggestions.

12-08-2002, 02:11 PM	#9
72'BBGMCSGCC Registered User Join Date: Nov 2001 Location: Fletcher,N.C U.S.A Posts: 162	Hi BigVinnie, It's a 72' GMC Sierra Grande Custom Camper with 66,000 origional miles,3/4 with 402 BB, Turbo 400 AT,factory A/C,Dual Tanks,Etc.

12-08-2002, 02:13 PM	#10
72'BBGMCSGCC Registered User Join Date: Nov 2001 Location: Fletcher,N.C U.S.A Posts: 162	I forgot to say , I was born in Escondido



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.