|
12-08-2002, 01:23 AM
|
#1 |
|
THE QUICKER FIXERUPER
Join Date: Jul 2002
Location: Ok
Posts: 615
|
Throtle linkage
I would like to put a 71 or 72 gas pedal assembly on my 69. I know that they are cabel operated but I dont think I would have any problems with the swap. Has anybody done this swap was it complicated, pics would be great
|
|
|
|
12-08-2002, 01:52 AM
|
#2 |
|
Registered User
Join Date: Dec 2002
Location: Fort Wayne, IN
Posts: 108
|
I plan on doing the same with my truck, although I already have a 72 cab so I don't think I would be able to help you much. Good luck on it though.
__________________
Save your money and do it right the first time. 1968 GMC short bed 1972 Cab 74 SB Chevy running gear |
|
|
|
|
12-08-2002, 02:00 PM
|
#3 |
|
1969 Custom 30 wrecker
Join Date: Sep 2001
Location: Pottsville, Pa
Posts: 2,611
|
The area of the floor where it bolts to is different. Look into this area first if your going to go for it. I removed a cable type from my '69 after I bought it that someone halfassed installed. I prefer the rod type myself.
__________________
Bob 63 Impala 283/PG/3.36 (under restoration) 66 Impala 327/PG/3.36 66 Chevelle SS 409/M22/3.55 69 Chevelle 307/PG/3.08 (future restoration) 69 C10 short stepside 454/TH350/3.73 69 Custom 30 tow truck 350/4 spd/4.10 (resto done, CRUISIN TIME!) 71 Cheyenne 20 fleetside 350/4 spd/4.10 71 Chevelle 6/PG/3.08 72 Chevelle 454/M21/4.10 |
|
|
|
|
12-08-2002, 02:08 PM
|
#4 |
|
Fabricate till you "puke"
Join Date: Jun 2002
Location: Ill
Posts: 9,402
|
I cut a pc from the firewall on a junk 71 cab, & welded it on my 69 to mount the peddle, then drilled the hole for the cable. Some of the guys are opting for aftermarket cables , such as Locar for more of a bolt in deal. Good luck......
__________________
69 longhorn,4" chop,3/5 drop, 1/2 ton suspension/disc brakes,1 1/2" body drop,steel tilt clip, 5.3/Edelbrock rpm intake/600 carb, Hooker streetrod shorties,2 1/2" exhaust/ H pipe/50's Flows , 6 spd Richmond trans,12 bolt/ 3.40 gears.... |
|
|
|
|
12-09-2002, 09:11 AM
|
#5 |
|
Senior Member
Join Date: Jul 2001
Location: Muskegon,MI,USA
Posts: 6,026
|
Because of the fire wall differences, I opted to cut the 69 pedal rod and welded on the 71-2 pedal so that I have the rod setup with the later pedal. The floor on the 71-2 has a heel rest and
I welded a formed sheet metal "hump" in to duplicate the foot rest. I am attaching a picture of the pedal and if you look close, you can see the weld area. Jim Last edited by JimKshortstep4x4; 12-09-2002 at 09:13 AM. |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
